Marine link
 

Maintaining integrity

Despite what could be best termed as difficult operating conditions, the German maritime market has persevered through its collective adherence to the principles which propelled it to the lead of the maritime construction and outfitting markets: a steadfast adherence to producing technologically correct and advanced vessels, products and systems. The challenges facing the German maritime market are not unlike those facing many of its European colleagues and competitors, or those facing industrial operations in any of the world's leading economies. The proliferation of lower-cost shipbuilding, ship repair and marine equipment supply options outside of Europe, particularly in Asia, has led to a significant drain on business emanating from, and dollars flowing to the German homeland. At the same time, the German industry continues to fiercely clutch the niche of high-quality vessel owners and operators, those that have come to expect and rely upon the technical excellence and operational reliability of maritime products that are made in Germany.

One such niche is the cruise ship industry, which Papenburg-based Meyer Werft has been a competitive force within for years. The cruise ship building process at the company's covered facility is nothing short of amazing, with three ships in various stages able to be built simultaneously in a relatively compact space. The yard is currently building Radiance of the Seas, Superstar Libra, Aurora, and Superstar Scorpio. Apart from its cruise ship building prowess, Meyer Werft has strategically positioned itself for prosperity well beyond 2000 — which is a positive development considering the recent newbuild orders for cruise ships filtering to Asian shipyards.

Recently, the second gas tanker for Norwegian shipowner — a notoriously quality-minded group — Sovang ASA was named Clipper Harald. The 480 x 67 ft. (146.4-m x 20.5 m) gas tanker have a cargo tank volume for 12,660 cu. m. and a speed of 18 knots. In addition to ethylene, the ship is able to carry vinyl chloride momomer, ammonia and propylene oxide in three bilobed tanks. August, 1999 The capability of carrying different liquefied gases at a temperature of down to minus 104 degrees C makes the tanker one of the most modern of its kind. Clipper Harald is the result of a cooperation between Thyssen Nordseewerke of Emden and Meyer Werft Shipyard, giving the two companies a very positive reference in a highly competitive market that is controlled by shipyards in the Far East.

Clipper Harald Main Particulars Length, o.a 480 ft. (146.4 m) Length, b.p 444 ft. (135.4 m) Breadth, molded 67 ft. (20.5) Depth to main deck 45.3 (13.8 m) Draft (ethylene) 25.3 ft. (7.7 m) DWT 13,500 Tank volume 12,660 cu. m. Engine output 7,980kW Speed 18 knots Crew cabins 23 Classification DNV The cruise market has brought recent good fortune to another German shipyard Lloyd Werft Bremerhaven — : which was recently awarded a contract by Cunard Line, Ltd. for the refurbishments aboard Queen Elizabeth 2, Vistafjord (to be renamed Caronia) and Royal Viking Sun (to be renamed Seabourn Sun. Specifics of the contract were not disclosed, but it is estimated that the re-design and upgrading of the three ships, including technical work and exterior maintenance and re-painting, will approach $34 million. "The unusual scope of the work dictated a yard with extraordinary capabilities and focus," said Cunard president and CEO Larry Pimentel. "There are considerable advantages for us, as well as for Lloyd Werft, to have all three of these ships in the same shipyard at roughly the same time. From our position, having all three ships at one yard makes it easier for our marine and technical staff to liaise with Lloyd Werft and monitor the work on a day-to-day basis." Lloyd Werft is no stranger to Cunard or the Queen Elizabeth 2, as the company has carried out work on the ship in 1983 and 1984, and carried out the complete overhaul and conversion of the vessel during a 179 day period spanning 1986 into 1987.

Another German yard that has maintained success in a technical specialty is the Flender Werft AG yard in Liibeck. The latest in a line of outstanding containerships delivered by the yard is newbuilding no. 671, MV Santa Fabiola, delivered to Hamburg based shipowner Claus-Peter Offen. The vessel will be Cunard Line president and CEO Larry Pimentel (right) recently announced the awarding of a contract to Lloyd Werft's Werner Luken for the refurbishment of three cruise ships. The estimated cost: $34 million.

called P&O Nedlloyd Singapore, following a timecharter to P&O Nedlloyd.

The ship is the fifth of the Flender 2100 type (F-class) commissioned by Claus-Peter Offen, and is known for economical and optimized stowage of a large capacity while maintaining low fuel consumption numbers. The 30,200-Lloyd (GL). GL, led by Dr. Hans Payer, continues to make impressive strides in many different areas of the maritime realm, with the goal of each project firmly entrenched in the "real business" side of enhancing maritime efficiency and safety. Most recently, GL launched project WaveLoads, which will be an advanced method for predicting wave induced loads for high speed ships. In announcing the project, GL said that to ensure their competitive positioning world markets, European shipyards need to be able to produce modern high speed ships that conform to the highest safety standards, while operating in the increasingly congested waters, which have become the hallmark of European short sea shipping routes. GL commented that classification society rules provide formulas for safe design loads, but they tend to reflect the service experience of existing ships and will not adequately account for future larger scale ship designs. The three-year Waveloads project is scheduled to culminate in the establishment of guidelines and recommendations for hull structural improvements and hull developments for high speed shipsfor such work. Two German companies Krupp Fordertechnik GmbH and Thyssen Nordseewerke — recently completed the first construction phase of the largest trailing hopper dredge, Vasco da Gama. With the first bottom section, the keel of the jumbo dredger was laid on the slipway of Thyssen Nordseewerke yard at Emden the end of last April. The company, along with its partner Krupp Fordertechnik GmbH, has been working on the newbuilding for the past year. Scheduled for delivery at the beginning of 2000 to Jan de Nul group of Belgium, the dredger measures 656 ft. (200 m), with a 118.7 ft. (36.2 m) breadth and 33,000 cu. m hopper capacity. With 36,000 kW installed power for speeds of 16.5 knots, it will be used mainly in land reclamation.




Ship Simulators History

Advanced Marine Enterprises, Inc.
American Shipbuilding Poised For 21st Century
Bulk Carrier Market Weakening
Buy Secondhand Ships Now?
Citing Strong Financial Performance in 1995, Carnival Raises Dividend
CRUISE SECTOR FOCUSES ENERGY ON NEW FLEET EMERGENCE
Eletson Signs letter Of Intent To Build Tankers At Newport News
Exporting Ships From U.S. To China
Germanischer Lloyd: R&D Helps Pave The Way For Safety
Griffin Orders New Containership
Haltor Marine Christens And Launches Advanced Oceanegraphic Research Ship
High-Yield Skipping Bonds: A Better Mouse-Trap, Or Just A Better Trap?
ILU Reports On 1994 Ship Casualties To Third Quarter
Keeping A Step Ahead
KVAERNER DELIVERS WORLD'S LARGEST PURPOSE-BUILT CABLE SHIP
Lykes Fights To Stay Alive Bankruptcy filing by Lykes raises many questions about the company's future
Maintaining a new Course
Making Ship Production More Profitable
MarAd Sets Strict Conditions For APL Foreign-Flag Activities
MSC Celebrates 50 Years
NASSCO Joins In Ceremony For Start Of Sealift Conversion Program
P&O Orders Two Containerships From Japanese Shipyard
PASSENGER VESSEL MARKET Near-term future remains bright as owners want bigger, better a
Preparing For Code Compliance
Shipping '94: The Risks & Rewards Of Quality Shipping
Simulation Training And Research Center To Open In Seattle In April
Step To The Head Of The Class
Stolt Parcel Purchases Four Chemical Parcel Tankers From Danish Interest
Technology, R&D: Charting A Steady Course For Cleaner Seas
USCG Proposes Shipboard Oil Pollution Rules
 
rss feeds | archive | privacy | history | articles | contributors | top news | contact us | about us | copyright