Marine link
 

New Series

MacGregor Delivers Load Handling for New Accommodation Vessels

Two sizes of MacGregor's offshore cranes have each been specified for Marine Assets Corporation's new series of four accommodation support vessels being built at Fujian Mawei shipyard in China. MacGregor, part of Cargotec, has secured a contract that will see eight cranes fitted onboard a new series of four compact semi-submersible (CSS) offshore accommodation vessels for Marine Assets Corporation (MAC). Each vessel, under construction at Fujian Mawei Shipbuilding Ltd. in China, will feature a 60-ton and a 12-ton offshore MacGregor crane. Crane deliveries are scheduled to begin in August 2014 and finish by the end of February 2015.  


Cat Unveils New Glycol Pumps

992407B_TEG_Glycol Pumps_web.bmp

Cat Pumps has introduced a new series of glycol pumps designed to supply triethylene glycol for natural gas dehydration systems. According to the company, these TEG triglycol pumps have been field proven in the most rigorous dehydration systems. The electric-engine-driven pumps were designed to reduce HAP's compliance and regulatory costs. They were also designed for performances from 2.3-25 gpm (8.7-94.6 lpm), pressure from 100-2500 psi (7-175 bar) and Temperatures up to 240°F (116°C)


MTU Series 2000 Yacht Engine Development

Marine Engine MTU 2000: Photo credit MTU

Tognum is to develop its MTU Series 2000 yacht engines to meet forthcoming exhaust gas emission regulations. Tognum is to develop its MTU Series 2000 yacht engines for compliance with US EPA Tier 3 Recreational and IMO Tier III emissions regulations. The new Series 2000 M96 engines will be able to cover outputs up to 2,600 bhp (1,940 kW), at the same time complying with IMO Tier II and EPA Tier 3 regulations using in-engine technology only


Tognum Upgrades MTU Series 2000 Yacht Engines

engine web.jpg

Tognum said it will develop its MTU Series 2000 yacht engines for compliance with US EPA Tier 3 Recreational and IMO Tier III emissions regulations. The new Series 2000 M96 engines will be able to cover outputs up to 2,600 bhp (1,940 kW), at the same time complying with IMO Tier II and EPA Tier 3 regulations using in-engine technology only.  Compliance with IMO Tier III will be possible with SCR exhaust gas aftertreatment


Kappel Propellers for Newbuild Bulk Carriers

Image courtesy of MAN Alpha Kappel

Lemissoler Navigation Co. Ltd., the Cyprus-based owner and operator, has selected the MAN Alpha Kappel propeller design for a new series of 8 × 58,500 DWT bulk carriers planned for delivery during 2015 and 2016. The 6.8-meter, slow-running, four-bladed Kappel fixed-pitch propellers will be tailored to the SDARI-designed bulk carriers and a drivetrain powered by an MAN B&W 5S60ME-C engine, economy-rated at 8,050 kW and 89 r/min


New Arctic Tanker Class Builds Underway

Construction has begun on a new series comprising six Arctic shuttle oil carriers (project 42K Arctic Shuttle Tanker) in South Korea. The steel cutting ceremony for the first ship was held on April 1, 2015 at Samsung Heavy Industries shipyard in the presence of the representatives of PAO Sovcomflot, Russian Maritime Register of Shipping (RS) and Lloyd`s Register (LR).    The series is constructed to dual RS and LR class


Flat Screen Marine Radars Earn Type-Approval

Litton Marine Systems (LMS) received type approval for its Decca BridgeMaster E 180 and 250 flat-screen marine radars. The type approval, granted by the U.K. Defence Evaluation and Research Agency, signifies that the flat-screen radars meet the stringent International Electrotechnical Commission specifications for performance and environmental requirements. The approval covers the 15-in. BridgeMaster E 180 and 18- and 20-in


NAVSEA Sponsors Program at U. of Michigan

The Naval Sea Systems Command (NAVSEA) has created a Summer Naval Surface Ship Design program in cooperation with the Department of Naval Architecture and Marine Engineering at the University of Michigan. The program will run from May 1 to June 16 and will include professors from the University of Michigan, the Naval Postgraduate School, Virginia Tech and instructors from NAVSEA’s Engineering Future Concepts and Surface Ship Design, Ship Costing, and Combat Systems Groups


OMEGA Introduces Submersible Pressure Transducers

Omega's new products will be featured at the Sensors Expo and Conference, June 5-7 in Rosemont, Ill. Omega introduces its new series of pressure transducers with precision micromachined silicon sensor. The PX709GW features lightning/surge protection for amplified models, fused polyurethane cable, premium temperature performance, broad compensated temperature range, protective nose cone and standard or custom cable lengths


Wärtsilä Offer Tempting Menu at Marintec China 2013

A Wärtsilä China facility: Image courtesy of Wärtsilä

A model of the hi-tech WSD 1000 MPSV, a multi-purpose offshore supply vessel with a unique fuel-efficient design, proven hull lines & an integrated equipment package from Wärtsilä, will be on display at the upcoming Expo. In addition to this and other exhibits, Wärtsilä Ship Power experts will be on hand to discuss a variety of topics in the following areas: Environmental excellence and compliance – Ballast Water Management Systems (BWMS)


Nautican Launches Standardized IPU Series

Image: Nautican

Nautican said it has completed the pre-engineering of new standardized components for a full range of Integrated Propulsion Units (IPUs) for propeller diameters from 64-156”, forming the core of the new Nautican Ocean Series IPUs.  


MN100: David Clark Company Inc.

(Photo: David Clark Company Inc.)

The Company: David Clark specializes in providing communication solutions for high-noise environments. The firm’s noise-attenuating headset systems are used worldwide in applications where clear communication is critical. All products are made in the USA at a 250


Damen to Launch Composite Water Bus

(Photo: Damen)

Damen said it is set to launch its first composite Water Bus as the prototype undergoes sea trials in the next few weeks.   According to the shipbuilder, the new vessel offers reduced fuel consumption, less maintenance, no corrosion or fatigue problems and is very robust


IMCA to Hold Maritime Security Seminar

The International Marine Contractors Association (IMCA) is hosting a Security Seminar in London on Thursday, November 10, which will focus on human factors in modern maritime security. Sponsored by Subsea 7 and Technip, the event is a continuation of IMCA's new series of mini-seminars –


New Multipurpose Tractor Tugs from OSD

OSD’s new series of tractor tugs are suited to perform variety of operations (Image: OSD)

Netherlands-based OSD (Offshore Ship Designers) has designed a new series of tractor tugs which can be used for a range of functions, including escort operations, harbor towage, ship handling, offshore mooring and berthing.   The basic model tug has a LOA of 33 meters and a beam of 13


New Module Training Series

Photo: Netherlands Maritime Technology

New module on ‘HVAC’ in training series ‘Design of Marine Auxiliary Systems’, series starts in March    The training series Design of Marine Auxiliary Systems have been expanded with a new module: ‘HVAC and refrigeration systems’ (module 4)


Ponant Orders Four Ships from VARD

Shipbuilding facility. Photo: VARD

Norwegian offshore shipbuilders VARD have announced a deal with French luxury cruise ship operator Ponant for the construction of four luxury expedition cruise vessels, for delivery in 2018 and 2019.   The vessels will be developed by Vard, Ponant, and Fincantieri


Seagull Launches Ex, El Safety Training

Seagull O&G new Ex and El safety training package. Photo Seagull

Seagull Oil & Gas has launched the most cost efficient and comprehensive e-learning training package in the industry for offshore personnel working in explosive atmospheres. Building on International Electrotechnical Commission (IEC) standards, the new series covers basic understanding


Wärtsilä Ship Design for Offshore Maintenance Vessel

Trinity- The new jack-up lift vessel is designed by Wärtsilä. Image by Wartsila

Wärtsilä has been awarded the contract to provide the design for a new jack-up lift vessel. The contract was signed in March with a well known Chinese yard and there is an option for three more vessels. The Wärtsilä design is developed in collaboration with Altis


Vane Bros. Continues Fleet Expansion

Hudson (Photo: Vane Brothers)

Vane Brothers, a marine transportation provider headquartered in Baltimore, has added two vessels to its fleet: the 4,200-horsepower tugboat Hudson and 55,000‐barrel barge Double Skin 601.   The Hudson is the second of eight vessels in Vane’s Elizabeth Anne Class of 4


New Series of Trawlers Built to RS class

Construction of a new series of trawler-seiner pr. SK-3101R has been commenced at the Shipyard Yantar (Kaliningrad).    Project SK-3101R was designed by Skipskompetanse, Norway. The trawler is intended for fishery using bottom and pelagic trawls, bottom net and seiner net


ACR Electronics Debuts New Products at Posidonia

GlobalFIX V4 EPIRB (Image: ACR Electronics)

Safety and survival technologies company ACR Electronics is introducing several new products at Posidonia 2016 taking place in Athens, Greece from June 6-10.   GlobalFIX V4 EPIRB ACR Electronics’ new GlobalFIX V4 EPIRB is a new professional grade design EPIRB


Wärtsilä to Power Two Indian Dredgers

The new 8000m3 trailing suction hopper dredgers being built for the Adani group  Photo Wärtsilä

Wärtsilä has won an order for two new 8000m3 trailing suction hopper dredgers being built for the Adani group, India's largest private multi-port operator. The vessels are the first of a new IHC Beagle series designed by Royal IHC (IHC) of the Netherlands. IHC will also build the dredgers


Silver Ships Delivers Fire/Rescue Boat

Photo: Silver Ships

Silver Ships, Inc. has recently delivered a 34-foot custom designed and purpose-built all-welded aluminum fire/rescue boat to the Islip Fire District on Long Island, N.Y.   The Islip Fire District’s area of responsibility includes The Great South Bay, communities on Fire Island


Cenac Marine to Christen New Vessel, Donate Barge

Benny Cenac (Photo: Cenac Marine Services)

A ceremony will be held July 29 at Cenac Marine Services headquarters in, Houma, La. To commemorate the christening of its newest vessel, M/V Quincey Cenac, as well as the company’s donation of a spud barge to Terrebonne Parish.  






 
rss feeds | archive | privacy | history | articles | contributors | top news | contact us | about us | copyright