Marine link
 

Tribon Solutions

Tribon Solutions Signs Contract With Daewoo Heavy Industries

Tribon Solutions has signed a $ 4.5 million, 3-year contract with Daewoo Heavy Industries to supply and implement the Next Generation of the current Tribon M1 product on Windows NT. This Tribon Mx Series development will lead to Tribon M2 and Tribon M3 systems. Tribon Mx Series development will be focused to greatly extend the Outfitting and Data Management functions in the current Tribon M1. Daewoo will contribute both requirements and partial financing for the Tribon Mx Series development. This contract is based on the already successful implementation of Tribon at Daewoo for commercial hull design and the complete use of both hull and outfitting functions at Daewoo Special Ships Division for in particular the Korean KDX1 Frigate and some recent orders for Passenger RoRo vessels. The results from this contract will allow Daewoo to carry out their CAD Unification Project, which has the goal of using one system for their complete design work. Daewoo will step by step over the contract period implement the Tribon system for the complete commercial ship design process and replace their older systems.


The Society of Maritime Industries and Tribon Solutions in Co-operation regarding Tribon.com

The Society of Maritime Industries, the umbrella organization of equipment and services in all areas of the maritime industry in United Kingdom and Tribon Solutions announced a co-operation agreement. The co-operation will provide the members of the Society of Maritime Solutions with a framework of activities to further strengthen their communication with and presence at shipyards worldwide by participating in Tribon.com.


COFRENA and Tribon in Cooperation Regarding Tribon.com

COFRENA, The Association of French Marine Equipment Manufacturers, and Tribon Solutions today announced a cooperation agreement. The cooperation will provide the members of COFRENA with a framework of activities to further strengthen their communication with and presence at shipyards worldwide by participating in Tribon.com.


NASSCO Signs Agreement for Use of Tribon Shipbuilding System

The National Steel and Shipbuilding Company (NASSCO), has signed a five-year agreement to continue their use of the Tribon Shipbuilding System at the San Diego shipyard in California. NASSCO will use the Tribon system for the design and production of all of their naval and commercial ships. NASSCO implemented the Tribon Hull system in 1995 on the Sealift New Construction program for the U.S. Navy. In 1997 NASSCO implemented the entire Tribon system including


Behemoth in the Offing?

Attuned to the liner shipping industry's unerring drive for economies of scale, classification society Lloyd's Register (LR) has developed a conceptual design of container vessel incorporating a 12,500-TEU capacity. Although some 55-60 percent greater in slot capacity than the biggest cellular vessels ordered to date, the envisaged Ultra Large Container Ship (ULCS) would be able to transit the Suez Canal and access key ports.


CadCam Report

German Yard Implements Nupas-Cadmatic The Peene-Werft in Wolgast, Germany, has chosen Nupas-Cadmatic software solution as their main CAD/CAE/CAM system. During an implementation project of about two months, the shipyard will implement Nupas-Cadmatic for the complete Hull structure, Piping, Machinery and Outfitting including special customizations for the yard's high-tech production facilities like profile cutting robots, automated pipe workshop


HDW purchases Topgallant

As part of the implementation of SAP R/3 at the Howaldtswerke-Deutsche Werft in Kiel, Germany, Atlantec Enterprise Solutions has been chosen to develop the link from the Tribon Hull shipbuilding software to R/3. The link is to be developed in close cooperation with HDW’s own software house, NIS Norddeutsche Informations-Systeme GmbH. Using information extracted from Tribon, the Topgallant software supplied by Atlantec Enterprise Solutions will prepare data for the ERP system.


Advances in CAD and CAM System Integration

Over the past 25 years CAD and CAM have become a vital part of shipbuilding. The individual tools have evolved into highly capable products of today. This has included the change from 2-D to 3-D CAD, a dramatic increase in the level of usability (example: from batch mode to fancy 3-D GUI's) and increased functionality within the tools themselves. With the development of these tools has also come improved integration of the CAD and CAM data


Advances in CAD and CAM System Integration

Over the past 25 years CAD and CAM have become a vital part of shipbuilding. The individual tools have evolved into highly capable products of today. This has included the change from 2-D to 3-D CAD, a dramatic increase in the level of usability (example: from batch mode to fancy 3-D GUI's) and increased functionality within the tools themselves. With the development of these tools has also come improved integration of the CAD and CAM data


3.MAJ Implements Tribon System

3.MAJ Shipyard, Croatia, has purchased the Tribon Shipbuilding system for design and production of ships at its shipyard in Rijeka. To increase the yard’s automatization and efficiency, 3.MAJ Shipyard will in the first phase implement the Tribon system to achieve a highly efficient steel construction site. To support a faster interaction between the shipyard’s designers and suppliers in order to reduce man-hours and costs when searching for equipment, 3.MAJ Shipyard has signed up for Tribon


Northrop Grumman Awarded Navy IT Contract

Contract document: File photo

Grumman Corporation informs it has been selected by the US Navy as one of five contractors for the Consolidated Afloat Networks and Enterprise Services (CANES) full deployment production contract to upgrade cybersecurity, command and control


New Product Targets Manhole Safety

SafeEdge

SafeEdge from Rustibus is a new and innovative system that provides safety for the crew and equipment when working around open manholes. This product is specifically designed to prevent injuries associated with open manholes onboard vessels or offshore platforms.


Permanent On-site Collision Damage Repair in Greece

Hydrex diver performing initial inspection of the damaged hull. (Photo: Hydrex)

In July Hydrex mobilized a team of diver/technicians to Syros, Greece, for a complex repair operation on a 118-meter, 8550 DWT chemical tanker. The vessel had suffered large cracks in her hull plating as the result of a collision. She was not allowed to sail any further


MTU Exhibits at Innotrans 2014

MTU Friedrichshafen, a subsidiary of Rolls-Royce Power Systems AG, will be exhibiting its drive and service solutions at the international trade show for railway technology Innotrans from 23 to 26 September in Berlin in hal

MTU Friedrichshafen, a subsidiary of Rolls-Royce Power Systems AG, will be exhibiting its drive and service solutions at the international trade show for railway technology Innotrans from 23 to 26 September in Berlin in hall 18, booth 301. The company will be celebrating an anniversary on this


FMC Forum to Address US Port Congestion

FMC_seal.JPG

U.S. Port Congestion: Examining Causes, Impact on Stakeholders and Exploring Possible Solutions Federal Maritime Commission (FMC) Chairman Mario Cordero will hold a forum titled, "U.S. Port Congestion: Examining Causes, Impact on Stakeholders and Exploring Possible Solutions" Monday


SBI Wins Jack-up Design and Engineering Contract

SBI Offshore Limited, which is pursuing higher-value oil and gas engineering projects, said today it has secured a $24 million contract to provide design and engineering services for a jack-up drilling rig that can operate in water depths of up to 110 meters.


OceanSaver Reports Surge in BWT Orders

Tor Atle Eiken

OceanSaver said it has received a rush of ballast water treatment (BWT) system orders for large vessels. The Norwegian firm, a BWT specialist developing solutions since 2003, has won orders for more than 40 systems in the last six months, with some 21 units delivered so far this year.


GTI, RTE Announce Strategic Partnership

Integrated wireless tracking, monitoring and management of refrigerated containers for intermodal transportation worldwide. Globe Tracker International (GTI), a company in global trade data sharing, autonomous asset tracking and monitoring and related data analytics


The Switch Wins Repeat PM Shaft Generator Order

Image courtesy of The Switch

The Switch, a supplier of megawatt-class permanent magnet (PM) generator and full-power converter packages for wind power and other renewable energy applications, has received repeat PM shaft generator orders from WE Tech Solutions of Finland, a customer in the marine sector.


St Engineering's Land Systems Arm Inject Capital in Brazil

  Singapore Technologies Engineering Ltd (ST Engineering) announced today that SDG Kinetics Pte. Ltd. (SDGK) and Autonomous Technology Pte Ltd (ATPL), wholly owned subsidiaries of its land systems arm, Singapore Technologies Kinetics Ltd (ST Kinetics), have injected BRL5,499


MN 100: Cummins, Inc.

Cummins QSK60egen_Red_Cam08_CMYK EH.jpg

500 Jackson Street Columbus, Indiana 47201 Tel: (812) 377-5000 Email: jon.mills@cummins.com Website: www.cummins.com Chairman/CEO: Tom Linebarger The Company: Global power leader Cummins, Inc. is a corporation of complementary business units that design, manufacture


MN 100: ABS Group

weinstein.jpg

16855 Northchase Drive Houston, TX 77060 Tel: (281) 673-2945  Email: kevenson@abs-group.com Website: www.abs-group.com President & CEO: David Weinstein The Company: ABS Group provides a range of technical solutions to support safe


CMR Debuts Gas Engine Pressure Regulator

Image: CMR

A range of gas engine pressure regulators, which provide control of pressure levels within the fuel train on dual fuel or natural gas engines, is new for control and instrumentation specialists CMR Group. CMR’s regulators enable high-pressure gas fuel from lines and tanks to be reduced


New Partnership to Evaluate Dual Fuel Applications

American Power Group Corporation (APG) announced they will be working with Marine Fuel Conversions, LLC (MFC) to evaluate potential applications and opportunities for APG’s dual fuel solution specifically in marine applications including on-board prime and ancillary power as well as port


GEA’s CatFineMaster to Debut at SMM

The new GEA Westfalia Separator CatFineMaster consists of a separator as the core element as well as a feed pump which is adjustable in the process for optimum adjustment of the flow quantity of the heavy fuel oil. The new control generation GEA Westfalia Separator IO automatically regulates the desired program with one touch.

A solution for separating dangerous catalyst fines (cat fines) from fuel with one touch of the button: This is the new product GEA Westfalia Separator Group will be showcasing this year at the SMM 2014 in Hamburg. The company is continuing its clear line as a competent and innovative partner for






 
rss feeds | archive | privacy | history | articles | contributors | top news | contact us | about us | copyright