Blade Stainless Steel Propellers News

Push boat operator Plimsoll Marine announced it has taken delivery of the fourth vessel in a series of newbuilds from Master Marine, Inc. “Plimsoll Marine strives to provide the Lower Mississippi River with premier push boat services utilizing the industry’s most modern and capable fleet of vessels. The delivery of the Steel Skipper marks another milestone in that effort,” said Angus R. Cooper III, President, Cooper/T. Smith. “Our ongoing investment in building and maintaining…

In December 2021 Blakeley BoatWorks completed construction of Green Wave, a fully compliant, state-of-the-art Subchapter M inland push boat. Owned by Plimsoll Marine, the vessel will operate within the Cooper Consolidated fleeting footprint, the largest fleeting footprint on the Lower Mississippi River. All three companies are part of the Cooper Group of Companies.Designed by Farrell and Norton and built by Blakeley BoatWorks over the course of a year, the 70-foot long, 28-foot wide, 1,600 horsepower vessel is fully compliant with the latest U.S.

Sea Change - America’s first hydrogen powered ferrySWITCH Maritime’s new 70-foot passenger ferry Sea Change is navigating uncharted waters as the United States’ first zero-emissions, hydrogen fuel cell-powered, electric-drive ferry.The pioneering aluminum newbuild, constructed by Bellingham, Wash. shipbuilder All American Marine, Inc. (AAM), has been completed and was launched this summer, though permitting of hydrogen fuel systems for maritime vessels is still being worked out with the U.S. Coast Guard.“Legislation and laws for passenger safety did not exist yet for this type of vessel.

The U.S.’ first linehaul towing vessel powered by Tier 4 Caterpillar high-speed engines with selective catalytic reduction( SCR) was built by Blakeley BoatWorks (BBW) and is now operated by Cooper Marine and Timberlands (CMT).In March 2021, Blakeley BoatWorks completed construction of M/V Gretchen V. Cooper, a state-of-the-art, Tier-4 inland linehaul tow boat. This 3,400-horsepower vessel is 110-feet long, 33-feet wide, and expands CMT’s fleet to 20 vessels.Currently, Tier-4 diesel engine standards are the strictest U.S.

Bayou La Batre, Ala. shipbuilder Master Marine, Inc. (MMI) has delivered the 67’ x 28’ pushboat Rock Solid to Plimsoll Marine. The Rock Solid is the third of four vessels that MMI is scheduled to deliver to the Lower Mississippi River push boat operator.“The delivery of the Rock Solid marks another milestone in our effort to build and maintain our industry’s most modern and capable fleet of push boats,” said Angus R. Cooper III, President, Cooper/T. Smith. “Our team prides itself…

Master Marine, Inc. (MMI) has delivered the 67- by 28-foot Iron Lady, the first of four new push boats it is building for Lower Mississippi River operator Plimsoll Marine.The four vessels are designed by Entech Designs, LLC. and are fully compliant with all U.S. Coast Guard regulatory requirements.Towboat Iron Lady is powered by two Laborde Products, Inc. Mitsubishi 803 HP Tier III diesel marine engines operating at 1,400 RPM and coupled to Twin Disc 5321 gears. Laborde Products…

Master Marine, Inc. has delivered a second towboat for Osage Marine Services, Inc. The newly built M/V Frank Mellor, like its sister ship, is a 67’ x 28’ vessel designed by Entech Designs, LLC. All USCG certificates for their Sub M compliance have been obtained.The towboat is powered by a pair of Laborde Products, S6R2-Y3MPTAW Mitsubishi 803 HP Tier III diesel marine engines to be operated at 1,400 RPM coupled to Twin Disc 5321 gears. Laborde Products, Inc. is also providing electrical power with two Northern Lights M65C13.2S 65KW Tier III electronic controlled generators with RW Fernstrum…

Master Marine announced that it has delivered the Entech Designs 67’ x 28’ M/V Rick Pemberton to Waterfront Services.The boat is powered by a pair of Laborde Products, Inc. S6R2-Y3MPTAW Mitsubishi 803 HP tier III diesel marine engines to be operated at 1400 RPM coupled to Twin Disc MG 5321, 5:1 gears, E300 electronic controls with RW Fernstrum, Inc. keel coolers. Laborde Products, Inc. also provided electrical power with (2) Two Northern Lights M65C13.2S 65KW Tier III electronic controlled generators with RW Fernstrum, Inc. keel coolers. A pair of Sound Propeller Services, Inc.

Master Marine, Inc. has signed Six (6) towboats and has laid the keels for the first two vessels. All Six (6) vessels will be 67’ x 28’ Entech Designs, LLC Sub. M compliant towboats. The first two will be working for Osage Marine Services, Inc., St. Louis, MO. with the rest operating in the lower Mississippi River system for an undisclosed customer. We are very happy to be teaming up with these companies to provide them and their customers the latest towboats and equipment available along with meeting Subchapter M requirements. The first two vessels will be delivered and placed into service, by the summer of 2019 with the additional Four (4) vessels to follow in close succession.Each boat will be powered by a pair of Laborde Products…

Alabama shipbuilder Master Marine has delivered Sam P. Hise, the third towboat in a series of four newbuilds for Illinois-based inland operator Waterfront Services Co.The 67’ x 28’ boat is set up with 10,400 gallons of fuel, 4,359 gallons of potable water and 9,500 gallons of ballast water along with providing a maximum 7’ 9” working draft.Each vessel will be powered by a pair of Laborde Products, Inc. S6R2-Y3MPTAW Mitsubishi 803 HP tier III diesel marine engines to be operated at 1,400 RPM coupled to Twin Disc MG 5321, 5:1 gears, E300 electronic controls with RW Fernstrum, Inc. keel coolers.

Thordon Bearings, of Burlington, Ont., has received an order to supply four comprehensive shipsets of stern gear for a new class of towboat.The four boats are being built by U.S. shipyard Master Marine of Bayou La Batre, Ala., for Waterfront Services, based in of Cairo, Ill.. The new vessels have been designed to meet the requirements of Subchapter M, a set of federal rules recently introduced by the U.S. Coast Guard, relating to the inspection requirement for towboats, including seaworthiness standards and safety protocols.The 67ft x 28ft boats…

Alabama shipbuilder Master Marine said it has delivered the newly built M/V Tom Torretti to Waterfront Services Co. The 67’ x 28’ fleet boat is powered by a pair of Laborde Products, Inc. S6R2-Y3MPTAW Mitsubishi 803 HP tier III diesel marine engines to be operated at 1,400 RPM coupled to Twin Disc MG 5321, 5:1 gears, E300 electronic controls with RW Fernstrum, Inc. keel coolers. Electrical power was also provided by Laborde Products, Inc. with two Northern Lights M65C13.2S 65KW Tier III electronic controlled generators with RW Fernstrum, Inc. keel coolers.

Master Marine has delivered the first of four 67’ x 28’ fleet boats to Waterfront Services Co. Each boat will be powered by a pair of Laborde Products, Inc. S6R2-Y3MPTAW Mitsubishi 803 HP tier III diesel marine engines to be operated at 1,400 RPM coupled to Twin Disc MG 5321, 5:1 gears, E300 electronic controls with RW Fernstrum, Inc. keel coolers. Electrical power was also provided by Laborde Products, Inc. with two Northern Lights M65C13.2S 65KW Tier III electronic controlled generators with RW Fernstrum, Inc. keel coolers. A pair of Sound Propeller Services, Inc.

Crowley Marine Services, Inc. has sold a second sister-tug of the Point Class to Island Tug & Barge Co., Marcon International, Inc. reported. The sale of the ABS +A1, Towing, +AMS classed, 2,100BHP shallow draft ocean towing / push tug Pt. Oliktok mirrors the transaction which Marcon brokered in 2013 between the two parties on the sister vessel ex-Pt. Barrow. The three Point Class sister-tugs were specifically designed and built to work in the Arctic, where Crowley needed vessels…

A planning boat that is light, fast and economical, yet has the usable deck area of a boat twice it’s size and the stability of a trimaran! Sounds too good to be true, well that was my initial reaction until I attended the Press launch in Italy of the “transformer” Wider 42. I call it transformer because that’s what it does. It can plane at speeds over 50 knots and when it stops, by pressing a button, in 12 secs it transforms the cockpit deck into an are twice its size. To ensure stability, two sponsons, one each side slide out from the hull to increase stability.

Bisso Towboat Co., Inc. announced the delivery of its new 4,000 HP ASD tractor tug Michael S. Constructed at Main Iron Works, Houma, LA, the 100 by 38 by 13.5-ft Michael S. is powered by two Cat 3516B main engines, producing 2,000 hp each at 1,600 RPM, which drive two Ulstein-Aquamaster US205 MK2 z-drives. The Z-drives feature 90.6 inch diameter by 82.4 inch pitch four blade stainless steel propellers set in stainless steel nozzles and the estimated bollard pull is 60 tons. Electrical service is provided by a pair of 99 KW Marathon Mariner generators powered by John Deere 6068TFM76 engines. Deck equipment includes a Markey DYSF-42 hydraulic bow winch equipped with 500 ft of eight inch circumference Plasma line and a Washington Chain and Supply RSRH100 100-ton quick release tow hook.

Chem Carriers, the Sunshine, Louisiana-based cargo carrier, once again chose Mitsubishi engines for its new M/V Dorella Banta. The 70 ft x 28 ft x 10 ft, 131-ton towboat was built by Rodriguez Boat Builders. The twin engines, supplied by Laborde, are Mitsubishi S12A2 series rated at 850 hp at 1,940 rpm. The 12-cylinder, 34-liter engines are EPA compliant. The vessel is equipped with 7:1 reduction gears, allowing the engines to turn 75 inch x 73 inch four-blade stainless steel propellers in a 76 inch Type 19A Kort Nozzel.

Constellation Maritime of Boston, MA sold the 2250 bhp twin screw tug Scorpius"(ex - Joseph T, Olympic, Georgeann) to Donjon Marine Co., Inc. of New Jersey fors ervice in their  fleet supporting dredging, marine construction and salvage operations. The tug, renamed "Meagan Ann" by her new Owners, was built in 1975 by Marine Power & Equipment; . She regularly towed for companies such as Baggen Tug & Barge, Sampson Tug & Barge, Knappton and Foss Maritime throughout the Pacific Northwest and before being transferred to Constellation Maritime on the East Coast. The 81.7 x 28.7 x 11 ft. tug has tankage for abt. 25,000 gallons of fuel and is driven by twin CATD399TA diesels producing a total of 2250BHP through CAT 4.22:1 reduction gears to 88 x 85 in.

The area directly south of Lafayette, La., is authentic bayou country, known for Cajun culture, excellent food, unique music and, for boat lovers, the crew/supply boat capital of the world. Four boat yards in this area build these multi-engine, all- aluminum, speedy vessels, almost exclusively. Each yard turns out up to six crew/supply boats a year. In fact, three of the shipyards are located within just a few miles from each other in the tiny hamlet of Loreauville, La., a town that seems to be made up mostly of aluminum welders. That, of course, is an exaggeration, but not by much. Not every vessel delivered from these shipyards goes to work supporting the search for oil and gas…

Robert King, based in Paducah Kentucky, is the manager of Ingram Support Service a wholly owned subsidiary of Ingram Barge Lines charged with managing 20 vessels that operate on the Ohio, Tennessee and Cumberland Rivers. These are among the smaller vessels in Ingram’s 137-vessel fleet and so operate without engineers. King’s job is to minimize down time and maximize efficient operational hours. He expects to do just that for 87x30-foot Charles M. Everhart now that he has pulled a pair of 900 HP two-cycle engines and replaced them with a pair of Cummins KTA38 1000 HP @ 1800 RPM main engines. The new engines are equipped with the Cummins Eliminator and Centinel options.

Robert King, based in Paducah Kentucky, is the manager of Ingram Support Service a wholly owned subsidiary of Ingram Barge Lines charged with managing 20 vessels that operate on the Ohio, Tennessee and Cumberland Rivers. These are among the smaller vessels in Ingram's 137-vessel fleet and so operate without engineers. King's job is to minimize down time and maximize efficient operational hours. He expects to do just that for 87x30-ft. Charles M. Everhart now that he has pulled a pair of 900 hp two-cycle engines and replaced them with a pair of Cummins KTA38 1000 hp @ 1800 rpm main engines. The new engines are equipped with the Cummins Eliminator and Centinel options.

Bollinger Shipyards signed a contract for three 145 ft. supply/utility boats with Edison Chouest Offshore. "It's wonderful to again be building boats for the Chouest organization," said Donald "Boysie" Bollinger, chairman and CEO of Bollinger. Vessels will meet new regulatory standards and will be less than 100 GT (U. S. Reg.) and less than 500 GT (ITC) registered tonnage. Each vessel will measure 145 x 36 ft. with a maximum draft of 11.5-ft. Normal operating draft will be eight ft. A pair of Cummins KTA-38MO diesel engines rated 750 bhp at 1,600 rpm were selected to power the vessel, driving Bollinger 72 x 57 in., four-blade, stainless steel propellers through Twin Disc MG5301 reverse/reduction gears with a ratio of 4.96:1.

Bristol Harbor Marine Design (BHMD) was recently awarded the contract from Blount/Barker Shipbuilding, of Warren R.I., to modify the design of an 85 ft. tug. The new tug is based on an 85 ft. tug currently under construction at the yard, the design of which was developed by BHMD and based on a classic Blount design. BHMD will take advantage of Computerized Numeric Controlled (CNC) cutting for the hull and deckhouse modification. Two CAT 3512 engines and 4:1 Twin Disc gears will power the tugboat. Two 65kW generators will supply the ship’s service power. The tug will be keel cooled and equipped with two, four-blade stainless steel propellers measuring 76-in. in diameter. In August, Blount Barker Shipbuilding signed a contract with Sea Wolf Marine of Bayonne, N.J.