Keeping Vessels Moving in the Harshest Conditions

Wednesday, November 20, 2002
In Seward, Alaska, the rain and snow season starts in September and ends roughly seven months later in April. It is understandable, then, when D.J. Whitman of Seward Ship's Drydock and Ship's Chandlery talks about the shipyard's new covered area for its ship repair and conversion facilities, that there is a certain glee in his voice.

"Covered ship repair facilities in (northern climate) European shipyards are pretty common, but not so in the U.S.," said Whitman. The company recently completed a yard upgrade with the installation of a 110 ft. high, 220-ft. long coverered facility, an investment that should pay off handsomely as it will allow work to proceed when weather conditions otherwise might shut them down.

With an 11-acre facility, three working berths and a 5,000-ton Synchrolift and the new covering, the facility is now well prepared to handle just about any emergency or planned maintenance. In mid-October Crowley's PRT Attentive was in for a Z-drive refurbishment. "We give priority to the response vessels, because without the them oil tankers can't operate," Whitman said.

With a staff of 45, Whitman counts intricate propulsion system repair as one of the yard's specialties, as accrued experience and support from manufacturers helps keep work flowing smoothly.

Seward Ship's opened in 1973 to answer to the growing need for vessel repair services close to the fishing grounds. By 1974, the demand and the increasing work load led to the construction of the current home for Seward Ship's Chandlery in the Leirer Industrial Park. In 1979 Seward Ship's leased and rebuilt a 300-ton marine railway facility at Lowell Point. This facility operated until 1985, when Seward Ship's began drydocking and servicing vessels at the Seward Marine Industrial Center, utilizing the new 5,000-ton Syncro-Lift. In 1988 Seward Ship's leased two acres at the Seward Marine Industrial Center, the present site of Seward Ship's Drydock, Inc. operations.

Since that time Seward Ship's operations have expanded to an 11 acre full service shipyard that includes over 20,000 sq. ft. of covered work area and buildings plus total operating control of the Syncro-Lift Drydock facility. Construction is presently underway for a covered work station capable of. totally covering a 200 ft. vessel.

Maritime Today


The Maritime Industry's original and most viewed E-News Service

Maritime Reporter May 2016 Digital Edition
FREE Maritime Reporter Subscription
Latest Maritime News    rss feeds

Shipbuilding

Bay Shipbuilding Delivers ATB to Moran

Fincantieri Marine Group’s Fincantieri Bay Shipbuilding (FBS) has delivered the Articulated Tug Barge unit (ATB) Barbara Carol Ann Moran and the 110,000-barrel

Conrad Shipyard Christens Woods Hole Ferry

M/V Woods Hole, a 235-foot long passenger ferry built for the Steamship Authority of Woods Hole, Mass., was christened on May 20 at Conrad Aluminum in Amelia, La.

Tech & Design Solutions for Modern Workboats

EPA Tier 4 regulations (for engines of 804 hp and higher) and propulsion advancements have many manufacturers and vessel designers changing course to adapt to new requirements and customer demands.

 
 
Maritime Careers / Shipboard Positions Maritime Security Navigation Offshore Oil Pod Propulsion Port Authority Ship Electronics Ship Repair Ship Simulators Shipbuilding / Vessel Construction
rss | archive | history | articles | privacy | contributors | top maritime news | about us | copyright | maritime magazines
maritime security news | shipbuilding news | maritime industry | shipping news | maritime reporting | workboats news | ship design | maritime business

Time taken: 0.0830 sec (12 req/sec)