Deepwater Cutter Achieves Milestone

Friday, June 10, 2005
Deepwater Cutter Achieves Milestone The U.S. Coast Guard's 140-ft. fast-response cutter has reached a systems requirements milestone resulting in the ship being one step closer to construction commencement. The fast-response cutter is being built by Integrated Coast Guard Systems (ICGS), a joint venture between Northrop Grumman Corporation and Lockheed Martin, under the Integrated Deepwater System Program. The purpose of the systems requirements review was to present the ship concept to the Coast Guard and to confirm the customer requirements have been sufficiently developed, so the ICGS team can proceed to design development. The new cutter has been developed to meet post-Sept. 11 mission requirements. The new composite-hulled craft, to be manufactured at Northrop Grumman's Gulfport, Miss., composites center, will have a 40-year hull-life. The cutter will be interoperable with other Deepwater assets and will operate at 30+ knots, providing exceptional response and reaction capability. Typical missions will include near-shore fisheries patrol, migrant and drug interdiction, barrier patrols and augmenting patrols in areas of concern. "We are facing very aggressive schedule goals for this program," said Mike Duthu, Northrop Grumman Fast-Response Cutter program manager. "To meet specific homeland security defense needs, the program has been accelerated by nearly 10 years from what was originally proposed at the time of contract award in June 2002. During the execution of each phase, we will have a Northrop Grumman team continually planning, scoping and proposing the next phase to achieve program milestones." The systems requirements review, held at Northrop Grumman Ship Systems sector's shipyard in New Orleans, included demonstrations on the fast-response cutter's hull, mechanical and electrical design, the Command, Control, Communications and Computers, Intelligence, Surveillance and Reconnaissance (C4ISR) suite and logistics support. ICGS also presented information on the ship's preliminary operational plans as an asset in the Integrated Deepwater System. As a result of the systems requirements review process, the Fast-Response Cutter program now moves into the preliminary design phase, with the customer review scheduled for this August. The Integrated Deepwater System is a critical multi-year, multi-billion dollar program to modernize and replace the Coast Guard's aging ships and aircraft, and improve command and control and logistics systems. It is the largest recapitalization effort in the history of the Coast Guard.

Maritime Today


The Maritime Industry's original and most viewed E-News Service

Maritime Reporter April 2016 Digital Edition
FREE Maritime Reporter Subscription
Latest Maritime News    rss feeds

Offshore

Highest-Pull Wireline Conveyance System from Schlumberger

Schlumberger announced today the launch of the MaxPull high-pull wireline conveyance system that can pull from 18,000 lbf to 30,000 lbf in wells 40,000 ft [12,192 m] deep or more.

Cyberhawk Sinks Claws into US O&G Market

Cyberhawk Innovations, the world leader in aerial inspection and survey using Unmanned Aerial Vehicles (UAV), is set to boost its international credentials with

DNS Appoints Esson, Chief Executive

Decom North Sea (DNS), the representative body for the offshore decommissioning industry, which promotes and facilitates collaboration and cost reduction, today appointed a new chief executive.

Coast Guard

USCG Sets 2nd Round of Hearings for El Faro

The U.S. Coast Guard will conduct a second round of public hearings May 16-27 for the Marine Board of Investigation into the loss of the U.S.-flagged cargo ship El Caro, and its 33 crewmembers.

Islamic Militants Free Indonesian Sailors

Ten Indonesian tugboat crewmen held by the Abu Sayyaf terror gang in the southern Philippines were freed unharmed Sunday.   The sailors arrived in Jakarta late on Sunday night,

Disabled Fishing Vessel Towed to Maine

The 60-foot fishing boat Paulo Marc was towed by the crew of U.S. Coast Guard Cutter Moray after the fishing vessel became disabled Wednesday about 90 miles east of Portland, Maine.

 
 
Maritime Contracts Maritime Standards Navigation Pipelines Port Authority Salvage Ship Repair Shipbuilding / Vessel Construction Sonar Winch
rss | archive | history | articles | privacy | contributors | top maritime news | about us | copyright | maritime magazines
maritime security news | shipbuilding news | maritime industry | shipping news | maritime reporting | workboats news | ship design | maritime business

Time taken: 0.0673 sec (15 req/sec)