Feature: NY Navigation Channels: The Really Big Dig

Thursday, November 13, 2003

Boston can claim its new tunnel project as the "big dig", but the nearly $3 billion effort to dredge navigation channels in and around New York to 45 — and eventually 50 ft. — is the second largest USACE project; ever. — by Greg Trauthwein

The initial thought while standing in the working cockpit of the world's largest backhoe dredge is: "how does this thing not simply snap off and fall in?"

However, with each 13-yd. bucket scoop of the bottom of Kill van Kull breaking above the water's surface and being unceremoniously dumped into an awaiting 4,000 yard scow — a process that takes all of 60 seconds — one quickly appreciates the engineering genius behind the behemoth from Liebherr, the entire vessel in fact, as it steadily works to deepen the navigation channel for the growing fleet of very large, very deep draft containerships that call on the ports of New York/New Jersey.

Maritime Reporter recently ventured out into the harbor with the U.S. Army Corps of Engineering - New York District, hosted by Colonel John O'Dowd, District Engineer, to view first-hand the gargantuan task of digging the navigation channels to 50 ft. The effort is necessary to accommodate the growing number of very large containerships that come calling on the port. Simply put, the dig is essential for the port's long-term survival. While local tug operators may not be pleased with the effort, equating deeper draft ships to fewer ships entering port and hence fewer billing opportunities, if the big ships do not find NY accommodating their needs, they will simply go elsewhere. According to the American Association of Port Authorities, in 2002 New York/New Jersey ranked number three in North American in total TEU moved and is enjoying a healthy growth, with a total of 3,749,014 boxes, up 432,739 boxes (13%) from 2001. (See chart p. 28). As the USACE — NY District's quarterly newsletter quite accurately states, history is being made right now in the Port of New York and New Jersey, as currently there are approximately 80 pieces of dredging-related equipment in the harbor, including dredges, drill boats, survey boats, tugs and scows - arguably the largest concentration of equipment in one area in the entire 200-year history of the U.S. Army Corps of Engineers. Included in this mix is the backhoe dredge New York, the aforementioned largest backhoe dredge in the world.

New York, New York

The New York District is responsible for the Corps' water resource development, navigation, and regulatory activities in northeastern New Jersey, eastern and south-central New York State, including New York Harbor and Long Island, and parts of Vermont, Massachusetts, and Connecticut. In a nutshell, Colonel O'Dowd, who assumed command of the New York District of the U.S. Army Corps of Engineers in July 2001, is responsible for about 240 miles of Federal channels. Col. O'Dowd — who also holds the title of Supervisor of New York Harbor - annually oversees the awarding of approximately a half billion dollars in contracts for the district. Dredge New York was specifically built in 1999 for the job it is now performing, stationed in Contract Zone 5 (see map of area), a critical two mile-long by 800 ft. wide span that is scheduled for completion in the Spring of 2004. To the layman, accurately ascertaining exact dredging depth may seem more art than science. But according to Christopher G. Gunsten, project manager for Great Lakes Dredge & Dock Company, the advent of multi-beam bathymetry allows the operator and the Corps of Engineers to know the exact depth at any point on a given channel. "We have to come to within a tenth of a foot … so if they tell us to dredge to 52 ft., and it is only 51 ft., nine inches, we have to go back out and complete the job," said Gunsten.

Dredging in New York is far from a straight-forward process, as there are myriad logistical and environmental considerations, conditions which change with each of the dredge contract areas. Adding to the challenge: while the work goes on, the navigation channel must be kept open to normal commercial traffic, a feat which requires close cooperation with the U.S. Coast Guard as well as the other area marine authorities. The navigation channels in and around New York/New Jersey actually bear strong resemblance to its population: a massive quantity, but hardly homogenous. As Col. O'Dowd explained, digging out the area is a challenge on many fronts, not least of which is the wide variety of material to be dug: from sandstone and shale to Diabase rock, which is granite-like in appearance. Dredge New York can handle up to a 28-yd. bucket, but given the consistency of material in its present position, the 13-yd. size was deemed the most efficient for the task. Working 18 to 20 hours per day with a rotating crew of 40, Dredge New York is the largest and most efficient of the lot, utilizing the latest software which gives the operator a crystal clear picture of the bucket, allowing them to know its position within six inches at all times.

The Project

Many pieces of equipment are working to deepen the three active contract areas in the Kill van Kull to 45 ft., which stretches eight miles from Upper New York Bay into Newark Bay. Eventually, using a creative "piggyback" contract by the Port Authority of New York and New Jersey, a portion of the KvK channel will be the first completed 50-ft. channel in the port.

Years before the mobilization of the first dredge, before the first project area was awarded to a contractor, the KvK team worked together to produce a Project Management Plan during the planning and design phase. Now, the Project Delivery Team has executed an aggressive, accelerated schedule, which by 2004 will complete the deepening project ahead of schedule and under budget. The first phase of this project began in the mid 1980s and deepened the KvK to 40 ft.. Now, because of the demand of the larger vessels calling at the port, contractors have been working to construct a 50-ft. channel in certain areas. Post-Panamax vessels, which to the outside eye can appear no different from 10 years ago, actually will carry 8,000 containers, compared to 3,000 typically loaded on today's Panamax ships. The Kill van Kull is one of the most heavily trafficked channels in the port, where dredging, drilling and blasting occurs daily.

Maritime Today

The Maritime Industry's original and most viewed E-News Service

Maritime Reporter July 2016 Digital Edition
FREE Maritime Reporter Subscription
Latest Maritime News    rss feeds


Seaborne Transportation - Economy Without Borders

With seaborne transportation accounting for the vast majority of the world’s international trade, the importance of the shipping industry to the mechanics of the

Maersk Line Reroutes Asia

US East Coast service through the Panama Canal to improve transit times significantly!   Maersk Line will transform its TP12 service in to a standalone, around-the-world

INTERSCHALT Expands South American Network

INTERSCHALT maritime systems GmbH, a provider of services for communications, navigation and bridge equipment and the maker of voyage data recorder systems, has


Boskalis Awarded Aberdeen Offshore Wind Farm Contract

Royal Boskalis Westminster N.V. (Boskalis) has been awarded the Offshore Balance of Plant contract by Vattenfall for the construction of Aberdeen Offshore Wind Farm,

Great Lakes Dredging Awards Announced

Great Lakes Dredge & Dock Corporation announced that it was recently awarded four contracts with an approximate value of $93 million. Great Lakes received two

Fire-fighting ASD Tugs Sail to Argentina

At the end of June, two Damen ASD Tugs 2810 set sail from Damen Shipyards Galati in Romania to Puerto General de San Martin (Argentina) for towing, mooring, and

Maritime Careers / Shipboard Positions Maritime Contracts Maritime Security Maritime Standards Naval Architecture Offshore Oil Pipelines Pod Propulsion Ship Simulators Winch
rss | archive | history | articles | privacy | contributors | top maritime news | about us | copyright | maritime magazines
maritime security news | shipbuilding news | maritime industry | shipping news | maritime reporting | workboats news | ship design | maritime business

Time taken: 0.0776 sec (13 req/sec)