Bollinger Completes Conversion of Ned Ferry

Friday, September 19, 2003
Bollinger Shipyards, Inc., has completed a major conversion of the Crescent Towing tug, NED FERRY that transformed the boat from a single engine vessel with 3500 HP, to a twin-engine vessel with 4,000 HP. It is the third of eight Crescent Towing 105-foot sister ships to undergo the same upgrades and modifications at Bollinger Algiers LLC, the New Orleans based repair and conversion shipyard facility. Her old engine was replaced with two Caterpillar 3512B engines coupled to Reintjes WAF673 reduction gears driving 83-inch Bollinger stainless steel propellers. They were installed in 84-inch type 37 kort nozzles with stainless steel inner rings and leading and trailing edges. It has a 45-degree rudder angle for better maneuverability and its new power package is designed to generate 100,000 pounds or 50 tons of bollard pull. The boat’s stern was modified to accommodate the new propulsion system. Bollinger has reconstructed the tug’s wheelhouse with low profile stacks for maximum visibility and has installed new radars, GPS, depth sounders, hailers, VHF radios, fax machines, sound powered telephones, fuel emergency shut off systems, and remote control start and stops for the main engines. New Coast Guard approved oil and water separators and sanitary systems have been installed and channel coolers were replaced with keel coolers. Living spaces and the galley were refurbished and new air conditioning and heating installed. Mike Ellis, executive vice president and chief operating officer of Bollinger said, “This modernization project for Crescent Towing is similar to the U. S. Navy’s SLEP (Service Life Extension Program) in which ships receive upgrades to their design as well as the installation of new leading edge machinery and electronic technologies. Executives at Crescent have told us their two other tugs, LOUISIANA and FLORIDA (formerly LOUISE) that have already been converted, are performing beyond expectations. Conversions such as these extend the productive life of vessels while helping to keep their owners costs down without the higher costs of newbuilds.” The G. SHELBY FREIDERICHS, MISSISSIPPI, MARGARET F. COOPER, TEXAS and GLENN SMITH will follow the NED FERRY. Each is 105-feet in length with a 26-foot beam and 13.5 foot depth. They were built in the late 1950s and early 1960s. New Orleans-based Crescent Towing is part of the Cooper Group of companies ( Its twenty-four tugs provide harbor towage for vessels on the Mississippi, Mobile and Savannah rivers.
Maritime Reporter September 2015 Digital Edition
FREE Maritime Reporter Subscription
Latest Maritime News    rss feeds

Ship Repair & Conversion

Newport News Shipbuilding Converts to Natural Gas

Huntington Ingalls Industries (HII) announced today that its Newport News Shipbuilding division has converted its steam-generation plant from heavy fuel oil, also known as Bunker C,

ECDIS Ordered for 20 Indonesia Surveillance Vessels

Transas ECDIS has been selected for installation on board 20 surveillance vessels under operation of the Directorate General of Marine Resources and Fisheries Surveillance,

Towering Damen Marine Components Hits 150‏

Damen Marine Components (DMC), the oldest company in Damen Shipyards Group, celebrates its 150th anniversary today. DMC has grown from a very small shipyard established in Gorinchem in 1865,

Maritime Contracts Maritime Security Pipelines Pod Propulsion Port Authority Ship Electronics Ship Repair Ship Simulators Shipbuilding / Vessel Construction Sonar
rss | archive | history | articles | privacy | contributors | top maritime news | about us | copyright | maritime magazines
maritime security news | shipbuilding news | maritime industry | shipping news | maritime reporting | workboats news | ship design | maritime business

Time taken: 0.1182 sec (8 req/sec)