Polarcirkel Expands Design

Tuesday, January 20, 2009

Polarcirkel AS partnered with Nova Sea AS, Norway, to design and build a Cabin Workboat for transporting personnel out to fish farming feed barges, even in the harshest weather conditions.

Designated the Polarcirkel 860 Cabin Workboat, MS Nova Polar is built to the standard 28 ft 3 inch Polarcirkel limit, with the 10 ft beam providing a great working deck and a huge cabin with lots of head room and all round visibility.

Under the floor aft is a single Volvo Penta D6 series 5.5 liter diesel engine rated at 370 hp.  The engine drives an UltraJet 305 waterjet via a ZF220 gearbox to give the boat her shallow draught and manoeuvrability.  During sea trials the Polarcirkel 860 achieved 30 knots.

The hull has retained Polarcirkel’s traditional lines and rugged construction. With safety being a priority Polarcirkel boats are self-bailing and in contrast to a conventional RIB, have rigid pontoons filled with polystyrene combined with the 21o V-shaped hull and low center of gravity.

Nova Polar also comes outfitted with a Capstan winch capable of lifting 300 kg, a Raymarine E80 gps with radar  and echo sounder, Seago offshore life raft, Seematz search light and much more.
 
Located in Mo I Rana, Norway, PolarCirkel has built workboats for the Norwegian fisheries since 1987, using HDPE-100 plastic (LNG-based) which has excellent recycling properties. In the last 20 years they have built over 1000 workboats.

Nova Polar 860 Workboat Specifications:

Type of Vessel: Cabin Workboat
Builder:  PolarCirkel AS, Norway.
Owner:  Nova Sea AS, Norway.
Hull: V-bottom 21o
Construction: Polyethylene HDPE-100
Length:  28 ft 3 inch
Beam: 10 ft
Displacement: 7,940 lbs
Engine: Volvo  Penta D6 370 hp 5.5 liter diesel
Propulsion: UltraJet 305 with hydromechanical reverse controls
Gearbox: ZF220
Speed: 30 knots
Crew: Max 8 persons
Winch: Capstan
Radar & Echo Sounder: Raymarine E80 gps
Search light: Seematz
Bowlight: Xenon
Heater: Mikuni diesel

Maritime Reporter August 2014 Digital Edition
FREE Maritime Reporter Subscription
Latest Maritime News    rss feeds

Naval Architecture

Newport News Selects Paramarine Design Software

QinetiQ’s Paramarine Ship and Submersible Design Software has been selected by Newport News Shipbuilding (NSS) as its primary naval architectural software. QinetiQ

Fogal Retires from Zentech After 57 Years in O&G

Robert “Bob” “Sonny” Fogal, Jr., one of the icons in the offshore oil and gas industry, has decided to retire from front-line work as Zentech’s Director of Business Development.

SENER Announces the FORAN V70R3.0

SENER announces the new FORAN V70R3.0, available from July 31, 2014. With more than 45 years in the market, FORAN takes advantage of SENER´s innovative development

 
 
Maritime Security Maritime Standards Naval Architecture Offshore Oil Port Authority Salvage Ship Electronics Ship Repair Shipbuilding / Vessel Construction Sonar
rss | archive | history | articles | privacy | terms and conditions | contributors | top maritime news | about us | copyright | maritime magazines
maritime security news | shipbuilding news | maritime industry | shipping news | maritime reporting | workboats news | ship design | maritime business

Time taken: 0.1549 sec (6 req/sec)