ABS: Technical Guidance For Ice Class Tankers

Monday, May 24, 2004
ABS offers comparative structural arrangement studies for the design of each tanker ice class designation using procedures outlined in a just released “Guide for Non-Linear Finite Element Analysis (FEA) for Side Structures Subject to Ice Loads.”

The guide is an outgrowth from ABS’ work with the principal Asian shipyards developing new aframax ice class tanker designs in response to the increased traffic in the Baltic. Growing oil exports from the Russian port of Primorsk and Sakhalin have prompted a marked increase in the number of new tankers on order with ice strengthening to allow more flexible trading. Additionally, operators are taking into consideration the 2010 IMO imposed single hull phase-out deadline as they renew their aframax fleets.

“The FEA Guide allows us to perform direct calculations for developing alternative structural arrangements that are more producible than those developed from the prescriptive rules,” says Akira Akiyama, Vice President, Technology & Business Development, ABS Pacific.

These direct calculation methodologies help ABS to identify the simplest structural arrangements and optimal horsepower to meet the most stringent ice class requirements. “In the case of machinery output, credit can be given for increasing propeller performance and reducing ice resistance. In the case of the latter, ABS provides guidance on model tests to determine powering requirements,” he adds.

“For a typical aframax tanker the percentage of steel weight increases by as much as 16 percent for a Finnish Ice Class 1A Super or ABS notation equivalent of 1AA,” Akiyama points out. “Both owners and yards are looking to the classification societies to help them meet these requirements in the most cost effective manner without compromising the structural and operational capability of the vessel.”

ABS ice class requirements are incorporated into its Steel Vessel Rules. The notations indicate the thickness and severity of the ice conditions for which the vessel has been designed and built.

“Although reinforcement in the bow design is a primary concern, there are technical considerations for the entire hull,” says Akiyama. “The midbody and aft areas must be considered and the form of the hull must handle the ice-strengthened propulsion requirements and also handle compressive ice pressure if the vessel becomes trapped.”

By analyzing such factors as the period and severity of the expected ice conditions for specified areas of operation, including the presence of multi-year ice, ABS can provide valuable input to an owner’s decision making when selecting the most suitable ice class for a newbuilding.

ABS offers detailed data on maximum ice conditions within the considered region of navigation, ice propulsion analysis with supporting model and full-scale test data, ice load definition, stress analysis of ship structures due to the ice loads and safe speed determinations for navigation under differing ice conditions.

“Applied technology and practical experience are allowing us to constantly refine our ice strengthening rule requirements,” says ABS Chief Technology Officer, Christopher J. Wiernicki. “We have developed direct calculation methodologies for structure and machinery output that allow for alternatives to the prescribed Finnish-Swedish Ice Class Rules, as permitted by the Rules, without compromising safety equivalency. And we have developed a risk management module to the ABS SafeShip program that can be used by owners, and by ABS, to assess the total risks of a cold weather operational profile.”

Although there is a lot of attention being paid to the new generation of ice class tankers, the technology is also applicable to many other vessels, from containerships trading year-round into Montreal, to drill barges in the Caspian Sea, to the new generation of LNG carriers and the ABS-classed drilling and production unit in service off Sakhalin.

The three key requirements in assessing the ability of a ship to navigate in ice are power, strength and prediction of the ice loads. ABS points out the importance of understanding the differing characteristics of multi-year ice and first-year ice, and of the four basic forms of ice - solid, consolidated, brash or pack. Each has different properties and requires specific technical guidance and different class notations.

According to Clarkson Research Studies, there are currently 137 vessels on order with ice strengthening and of these 65 are to be constructed to ice class 1A. The ice class fleet is expected to grow by 9 percent in 2004, 12 percent in 2005 and 33 percent in 2006, predicts Clarkson.

Maritime Reporter May 2015 Digital Edition
FREE Maritime Reporter Subscription
Latest Maritime News    rss feeds

People & Company News

Maritime Disputes Test China's Peaceful Rise

The South China Sea has become the most important testing ground for the changing economic, political and military relationship between China and the United States.

Alewijnse Success at Damen Shiprepair Dunkerque

Electrical system integrator Alewijnse Marine Systems is celebrating the first anniversary of delivering electrical services and maintenance to vessels at Damen Shiprepair Dunkerque.

DNV GL Names Remi Eriksen Group CEO

Remi Eriksen has been appointed as the DNV GL Group’s new president and CEO, succeeding Henrik O. Madsen, who will retire August 1. The DNV GL board of directors

Technology

DNV GL Names Remi Eriksen Group CEO

Remi Eriksen has been appointed as the DNV GL Group’s new president and CEO, succeeding Henrik O. Madsen, who will retire August 1. The DNV GL board of directors

LNG Vessel with Wartsila Integrated Solutions Delivered to Evergas

The first in a series of 27,500 cbm 'Dragon' class vessels ordered by Evergas, a world renowned owner and operator of seaborne petrochemical and liquid gas transport vessels,

Executive Changes at Transocean

Transocean Ltd. today announced that, as mutually agreed with the company, Esa Ikaheimonen is stepping down as Executive Vice President and Chief Financial Officer effective immediately.

 
 
Maritime Contracts Maritime Standards Naval Architecture Offshore Oil Port Authority Salvage Ship Repair Ship Simulators Sonar Winch
rss | archive | history | articles | privacy | contributors | top maritime news | about us | copyright | maritime magazines
maritime security news | shipbuilding news | maritime industry | shipping news | maritime reporting | workboats news | ship design | maritime business

Time taken: 0.3906 sec (3 req/sec)