Bollinger To Construct Pair of Vessels For Seacor Marine

Wednesday, March 21, 2001
Bollinger Shipyards has been granted a contract to build two 145.5 ft. (44.3 m) supply/utility vessels for Seacor Marine of Houston, Texas. Construction will commence at Bollinger's Lockport, La. facility in April and May with delivery of the vessels scheduled for November and December 2001. Yet-to-be-named, each vessel will measure 145.5 ft. (44.3 m), with a 36 ft. (10.9 m) beam and maximum drafts of 10 ft. (3 m). They will be powered by two Cummins KTA-38MO diesel engines developing a total of 1,500 bhp at 1,600 rpm, driving Bollinger 72-in. x 57-in. stainless steel propellers through Twin Disc reverse/reduction gears. Two 99 kW Cummins generators driven by two Cummins diesels will produce electrical power in each. Two Quincy air compressors in each utility boat will start their engines, while a Schottel bowthruster driven by Cummins N-14 engine will provide additional maneuverability. Each vessel will boast 2,800 sq. ft. of aft deck space with a maximum deck load of 390 tons, as well as four mud tanks with a total capacity of 50,000 gallons of liquid drilling muds. Navigation and communications equipment onboard will be comprised of two JRC 48 mile radars; Fururno GPS; Comnav autopilot; Furuno radio; Standard Horizon Intrepid VHF radios with two remotes; and one Loudhailer with exterior hailer horns.
Maritime Reporter June 2015 Digital Edition
FREE Maritime Reporter Subscription
Latest Maritime News    rss feeds

New Products

Tuco Reveals New Naval Interceptor Vessel Design

Following last week’s Seawork exhibition on workboats and small military and security vessels, Tuco Marine of Denmark reveals its newest vessel in the ProZero line.

Barge Ballast Pumps Run Smooth with Vesconite

Vertical turbine pumps keep barges trimmed and balanced by moving water ballast. Bearing failure at this critical time is not an option. Vesconite Hilube, an internally-lubricated

ContainerTug B.V. Releases Two New Models

Young Dutch ship design, engineering and construction company ContainerTug B.V. follows on the introduction of the ContainerTug 600S early last year with the release

Workboats

Conference to Delve into Hybrid Power & Propulsion

The first international Hybrid Marine Power & Propulsion Conference will be held at the RNLI Lifeboat College, Poole UK from October 6-8, 2015.   Shock Mitigation

ContainerTug B.V. Releases Two New Models

Young Dutch ship design, engineering and construction company ContainerTug B.V. follows on the introduction of the ContainerTug 600S early last year with the release

Harvey Gulf Acquires Shipbuilding Assets

Harvey Gulf continues growth despite industry downturn; new affiliate Harvey Shipyard Group acquires Gulf Coast Shipyard Group   Harvey Gulf International Marine (HGIM) is launching a new affiliate,

 
 
Maritime Contracts Maritime Security Maritime Standards Navigation Offshore Oil Pipelines Port Authority Ship Electronics Sonar Winch
rss | archive | history | articles | privacy | contributors | top maritime news | about us | copyright | maritime magazines
maritime security news | shipbuilding news | maritime industry | shipping news | maritime reporting | workboats news | ship design | maritime business

Time taken: 0.0987 sec (10 req/sec)