New VapCor HydraFlow Fluid

Tuesday, July 21, 2009

VapCor Inc. introduced HydraFlow NS Hydraulic & Gear Fluids designed to create a safer workplace in environmentally sensitive areas. HydraFlow NS fluids typically have a pour point of -60°F (-51°C) and an upper operating range of approximately 150°F (65°C). This range of usability enables HydraFlow NS fluids to work in most weather conditions. Unlike mineral oil based lubricants HydraFlow NS fluids do not oxidize over time to form sludge. They also do not break down (hydrolyze) in the presence of water a common problem with polyol ester and vegetable based lubricants.

Many of the HydraFlow NS fluids have minimal environmental impact as shown by passing the following environmental tests:
Biodegradability (readily 74%)    Pass OECD 301B
EPA/Coast Guard Sheen Test    Pass
Plume Test    Pass DI and Sea Water
Aquatic Toxicity    Pass OECD 203 LC50>100 mg/

The newest addition to the HydraFlow NS fluid product line is HydraFlow NS Plus a hydraulic fluid that has been “FM Approved” by FM Global. HydraFlow NS Plus is a general all purpose water glycol hydraulic fluid rated to 5000 psi that is FM approved as fire resistant, which provides a safer working environment than conventional mineral or vegetable oil-based hydraulic fluids.


New Products

Wärtsilä to Launch Sea-Master at SMM

Set to launch at SMM 2016 in Hamburg September 6-9, 2016, the new Wärtsilä Sea-Master system uses digital technology to monitor shaft bearings and seals to help

First Multi-stream DuPont Scrubbers Installed

DuPont, through its subsidiary Belco Technologies Corporation (BELCO), is installing the first of its proprietary in-line, multi-engine marine scrubbers serving

Klüber to Present New EALs at SMM

“Closer to you” is the motto, under which Klüber Lubrication will be presenting its latest environmentally acceptable lubricants (EALs) for ships and offshore installations at the SMM 2016.

Fuels & Lubes

Alfa Laval Debuts FlowSync

Flow optimization of the separator feed increases protection from cat fines while decreasing energy use. The new Alfa Laval FlowSync is a single solution for automatic flow control,

Klüber to Present New EALs at SMM

“Closer to you” is the motto, under which Klüber Lubrication will be presenting its latest environmentally acceptable lubricants (EALs) for ships and offshore installations at the SMM 2016.

ABB Launches Torque Monitoring System

ABB has launched a new torque monitoring system called Torductor Marine, which is aimed at optimizing engine and fuel efficiency in the maritime sector. The new

 
 
Maritime Security Maritime Standards Naval Architecture Navigation Offshore Oil Pod Propulsion Port Authority Ship Electronics Ship Repair Ship Simulators
rss | archive | history | articles | privacy | contributors | top maritime news | about us | copyright | maritime magazines
maritime security news | shipbuilding news | maritime industry | shipping news | maritime reporting | workboats news | ship design | maritime business

Time taken: 0.0719 sec (14 req/sec)