Marine Link
Thursday, March 28, 2024

Playing the Tier Game

Maritime Activity Reports, Inc.

July 20, 2005

By Larry Pearson With few exceptions, marine power is diesel power and emissions levels from diesel engines are coming under increased scrutiny and regulations from the Environmental Protection Agency. The levels of acceptable NOx, carbon monoxide and particulate matter for diesel engines in U.S. flagged vessels depends on the displacement of the engine. The EPA has settled on a liters-per-cylinder measurement to determine the schedule to meet the emission requirements. For example, marine diesel engines between 1.2 and 2.5 liters per cylinder have had to meet what is known as Tier Two requirements since 2004. These are engines typically used to power small gensets, bow thrusters, fire pumps and other auxiliary engine requirements. However, not all of the engines between 1.2 and 2.5 liters per cylinder have to meet Tier Two requirements. "Engines used for emergency generators and other standby power are exemption from these regulations," said Gary Aucoin, marine sales manager for Louisiana Machinery Inc., Belle Chasse, La., a Caterpillar distributor and major supplier of diesel engines for shipyards in Louisiana. Larger engines, between 2.5 and 5.0 liters per cylinder must today meet less stringent emissions standards known as Tier One. These engines are used for main power requirements of marine vessels. "However in 2007, these engines must also meet the tougher standards of Tier two emissions," said Eddie Brown, emissions specialist with Cummins Marine, a division of Cummins, Inc., Columbus, Ind.

To meet these requirements the two largest suppliers of marine diesel engines, Cummins and Caterpillar, have spent millions on reducing NOx, CO and particulate matter to comply with EPA regulations. "Cummins' approach has been to take their existing engine platforms and make in-cylinder improvements such as adjustment to static timing, higher injection pressures, more effective after cooling and optimization of the turbo air," added Brown. "We have gotten the lower Tier Two numbers we needed on our 6BT and 6C engines lines with these in-cylinder improvements and we are working to do the same with our big engines, the KT Series and the QSK-60 so they will meet Tier Two standards in 2007.” Cummins has also had to drop certain engines from its lineup that would not meet Tier Two requirements last year including the N-14 engine, often used as an auxiliary engine on commercial vessels. In the real word of practical applications, Cummins supplies both Tier One and Tier Two engines on many of the vessels it sells. On a typical crew/supply boat, Cummins might supply four Tier One KT-50 engines for propulsion power and 2-4 of the 6BT or 6C series Tier Two engines for auxiliary power such as gensets, thrusters, pumps and other components needing diesel power.

Caterpillar has also invested heavily in reducing emissions from its line of diesel engines. Like Cummins, in-cylinder improvements have met Tier One and Tier Two requirements for maritime engines. Caterpillar has called these improvements ACERT technology. ACERT technology, which reduces emissions at the point of combustion, is comprised of proven Caterpillar technologies in engine electronics, fuel injection systems, combustion and aftertreatment. Caterpillar used this technology to develop a new line of engines for marine use to replace the 3000, 3100, 3200, 3300 and part of the 3400 line of diesel engines. Now called the C Series engines, they meet Tier Two requirements of the EPA. Also the ACERT technology will be a foundation upon which to meet future emissions regulations such as requirements for Tier Two emission standards in their engines larger than 2.5 liters per cylinder. For example, Master Boat Builders in Bayou LaBatre, La., is using several of the C-series engines in the new supply boats under construction for several customers. "To offer our customer's the best values, our vessels are standardized to some extent," said Andre Dubroc, president of Master Boat Builders.

For example, his 145-ft. and 164-ft. supply boats use a pair of Caterpillar 3508 diesel engines for propulsion. "These engines offer a larger displacement than 2.5 liters per cylinder so they meet current EPA regs as Tier One engines," Dubroc said. "However we have gone to Caterpillar C-9 engines for our gensets that offer 150 kW of power. The old 3306 and 3406 engines are not used anymore since they do not meet the new emissions standards," Dubroc added. Caterpillar C-12 engines, rated at 340 hp are used for higher horsepower applications such as bow thrusters. Like the C-9, these engines are Tier Two compliant as well. On their larger 185-ft. supply vessels, Master Boat uses Tier One Caterpillar 3512 engines for main propulsion and a pair of Caterpillar C-18 engines each supplying 550kW of electrical power and a smaller C-9 engine adds another 250 kW of electric power. Master Boat Builders is currently building supply boats for Abdon Callais Offshore, Golden Meadow, La. and Seacor Marine, Houston, Texas. The future of EPA regulations for marine engines is sort of a moving target. Moving Tier Two emission standards to the larger marine diesels in on track for 2007. Beyond that lies Tier Three and Tier Four regulations. "No doubt we will have to move outside of the world of in-cylinder changes to meet stricter regulations," Brown believes. "We may be talking about better fuels that may not be available until 2011," Brown said.

Subscribe for
Maritime Reporter E-News

Maritime Reporter E-News is the maritime industry's largest circulation and most authoritative ENews Service, delivered to your Email five times per week