Copier Bevelmachines' Stationary Pipe Bevel Machinery

MarineLink.com
Wednesday, September 25, 2013
Beaver 16S, 16 inch pipe bevel machine

Located in Giessen, The Netherlands, Copier Bevel machines’ factory and engineering department designs and manufactures pipe finishing machinery, with a primary focus on stationary pipe bevel machines. Approximately 95% of the company’s market is export, more than 70% of which is outside the EU.

Copier Bevel manufactures different types of stationary pipe bevel machines altogether covering a range up to 48 inches OD. Its highest selling machine is the Beaver 16S, which features a range from 2.5-16 inches.

The company said its innovation is based on the Beaver S-series, called the Inside Diameter tracking system, which follows the inner pipe by a spring loaded roller and beveling mechanism.

The I.D tracking system is designed to keep track on out of round pipes, resulting in an accurate bevel on the edge of the pipe, the manufacturer said, and the tool holders are to be set in the head of the I.D tracking system to get required angles.

bevelmachines.com
 

  • I.D.Tracker, extra option on pipe bevel machine

    I.D.Tracker, extra option on pipe bevel machine

Maritime Reporter November 2014 Digital Edition
FREE Maritime Reporter Subscription
Latest Maritime News    rss feeds

Shipbuilding

NASSCO Cuts Steel on APT "ECO Tanker"

General Dynamics NASSCO started construction of another ship in its commercial shipbuilding backlog, starting construction of a second “ECO” tanker to be built

Multraship Buys Three More Tugboats from Damen

Multraship and Damen Shipyards Group agreed on three new ASD (Azimuth Stern Drive) Tugs, all for delivery to Multraship in 2015. After delivery in Vietnam, scheduled

Waterjet-propelled Crewboat Delivered to Petrobras

BS Camburi, a 36-meter Monohull Crewboat built in Brazil by Arpoador Engenharia to the Petrobras type P2 specification has been launched and delivered.   Designed by Incat Crowther,

News

US Shippers, West Coast Dockworkers Union Resume Contract Talks

Negotiators for shipping lines and terminal operators at 29 U.S. West Coast ports resumed contract talks with the union for dockworkers on Thursday, as cargo backups continued at the ports,

USCG Says Unaffected by Cuba Policy Changes

The U.S. Coast Guard (USCG) issued a statement today stating that the United States’ Cuba policy change will not impact its missions annd operations. “Coast Guard

Report: Dire Conditions in Indian Shipbreaking Yards

Report by Indian research institute reveals poor enforcement of occupational health and safety provisions   The working and living conditions at the shipbreaking yards of Alang,

Marine Equipment

Waterjet-propelled Crewboat Delivered to Petrobras

BS Camburi, a 36-meter Monohull Crewboat built in Brazil by Arpoador Engenharia to the Petrobras type P2 specification has been launched and delivered.   Designed by Incat Crowther,

Hoists Facilitate Offshore Crane Repairs

When the diesel engine of a deck crane failed, it caused major handling problems for an offshore platform operating in the Dutch sector of the southern North Sea,

Wärtsilä Bags Seawater Desalination System Orders

The Meyer Werft Germany, Meyer Turku, STX France and Fincantieri shipyards have all placed orders with Wärtsilä for the supply of fresh water generators to a total of seven cruise ships.

 
 
Maritime Contracts Navigation Offshore Oil Pipelines Port Authority Salvage Ship Electronics Ship Simulators Sonar Winch
rss | archive | history | articles | privacy | terms and conditions | contributors | top maritime news | about us | copyright | maritime magazines
maritime security news | shipbuilding news | maritime industry | shipping news | maritime reporting | workboats news | ship design | maritime business

Time taken: 0.2524 sec (4 req/sec)