Canarias Multinautica Gains IMCI Certification

MarineLink.com
Monday, April 29, 2013

Canarias Multinautica S.L. located in the Canary Island has been successfully certified by IMCI in all four required business certification areas: boat specialized trade, accessories specialized trade, boat service specialized trade, engine sales and service specialized trade (three levels).

The certification of Canarias Multinautica S.L. was commissioned on behalf of Yanmar.

IMCI has an advanced corporate certification approach which focuses on quality. Compliance is regularly checked using clearly defined objectives. This certification comes with the advantage that the end user is shown a defined and validated quality of services. When all mandatory criteria as well as the required

The quality catalogue has a total of approximately 200 individual criteria standards including about 90 mandatory requirements which have to be fulfilled. The additional performance criteria points are collected in order to reach the specified and minimum number of required points. To this end, each company gets audited by an IMCI Inspector. A corporate certification is the successful verification of a company using a set of criteria checked by a neutral certification body. In addition, this process is regulated by an EN standard. Undoubtedly, the most commonly known is certification to EN ISO 9000 ff. These are standards that describe the principles of quality management measures for a system certification. Through carefully documented processes within an organization, it is ensured that the objectives of quality management can be achieved. Thus the operational procedures are certified as opposed to the quality itself.
 

Maritime Reporter June 2015 Digital Edition
FREE Maritime Reporter Subscription
Latest Maritime News    rss feeds

People & Company News

DNV-GL Approves Kongsberg Engine Room Simulators

Kongsberg Maritime has received DNV-GL certification for three of its latest engine room simulator models designed to provide in-depth training on the K-Sim Engine simulator platform.

Container Shipping Lucky to Break Even in 2015

A toxic mixture of overcapacity, weak demand and aggressive commercial pricing is threatening liner shipping industry profitability for the rest of 2015, according

CMA CGM's OPDR Acquisition Approved by EU

The CMA CGM Group announced that the European Commission has approved its acquisition of OPDR. In order to finalize the acquisition, which was announced on November 25, 2014 by Jacques R.

Marine Equipment

Shell's Icebreaker Vessel Damaged in Alaska

Royal Dutch Shell Plc's  icebreaker vessel Fennica returned to the Dutch Harbor in Alaska with a small breech in the hull, raising concerns about the company's

Wärtsilä Propulsion for New Fishing Vessel

A new fishing vessel being built by Simek AS in Norway on behalf of the U.K. operator Antares (Whalsay) Fishing Company Ltd, will feature an integrated Wärtsilä

Danish Ports Approve HullWiper

Authorities at the Danish ports of Copenhagen, Kalundborg and Fredricia have granted permission for GAC EnvironHull’s pioneering, diver-free, underwater HullWiper

Yachts

Tunisia Reassures Yachters Following Terror Attack

A week after a terrorist attack in Tunisia, local superyacht businesses are reassuring yachters that security has been increased at Tunisian ports despite numerous cancellations.

Carlyle Group Acquires LMC

Global alternative asset manager The Carlyle Group today announced the acquisition of Lauderdale Marine Center (LMC), the nation's largest yacht repair facility

Damen, AMELS sell YSV with Heli Hanger

The sale of a new 69-metre Yacht Support vessel marks the next level of development for the successful Yacht Support range built by DAMEN in cooperation with Dutch luxury yacht builder AMELS.

Classification Societies

KR Overhauls Hull Structure Software

IACS member classification society the Korean Register (KR) informs it has overhauled its SeaTrust-HullScan software package, a ship design support solution that analyzes and appraises a vessel’s.

GEORG FORSTER Calls Southampton for the First Time

The CMA CGM Group announced that the CMA CGM GEORG FORSTER called England for the first time on July 6th.    With its 1,305 ft. (398m) length and 177 ft. (54m) width,

AVEVA, DNV GL's Sesam Integration Cuts Cost

Integration of Aveva and DNV GL's Sesam Reduces Costs in Maritime and Offshore Engineering. Engineers designing ship hulls and offshore floaters can now save

 
 
Maritime Careers / Shipboard Positions Maritime Contracts Maritime Standards Naval Architecture Navigation Offshore Oil Pipelines Port Authority Ship Repair Ship Simulators
rss | archive | history | articles | privacy | contributors | top maritime news | about us | copyright | maritime magazines
maritime security news | shipbuilding news | maritime industry | shipping news | maritime reporting | workboats news | ship design | maritime business

Time taken: 0.3251 sec (3 req/sec)