Incat Crowther Designs DSV Trio

Marine Technology Reporter
Monday, September 30, 2013
Photo: Incat Crowther

Incat Crowther has been contracted to design a trio of 42.5m Monohull Dive Support Vessels. The design is a new concept borne of the latest ideas from designer, builder and operator. The design has been developed to be a dedicated DP-2 capable Dive Support Vessel, featuring fully integrated ROV launch and recovery, dive compressors and decompression chamber. The vessels, currently under construction at SeaSafe Barcos Manufaturados, in Angra do Reis, Brazil, will be delivered to Sistac. The first of the three vessels, to be named Sistac Vitória, is due to be delivered in the first quarter of 2014.
The aft deck will feature a large working deck, which will house the ROV crane and reel, a pair of dive platforms and two deck cranes. Inside the main deck house are functional areas such as toilets and showers, dive shop (housing compressors and decompression chamber) and ROV shop.
Forward of these spaces are an office, TV room, meeting room, mess areas and two single-berth cabins for senior personnel and a designated officer cabin.
A spacious wheelhouse is located upstairs, with forward and aft facing vessel control stations, ROV and dive control workstations. Overhead windows are fitted both fore and aft for high-angle visibility.
Four Scania D13 main engines, each producing 410kW, will power the vessels. The vessels will have a service speed of 13 knots and a top speed of 15 knots. The DP-2 capability ensures the vessel can hold station in the event of a failure in any single component of the system, enhancing both safety and reliability.

 

Specifications – 42.5m DSV
Lengt, o.a.    42.5m
Lengt, w.l.    38.5m
Beam, o.a.     9.3m
Draft (hull)     1.85m
Draft (prop or max)     1.85m
Depth     4.25m
Construction    Aluminum
Fuel Oil     112,000 liters
Fresh Water     20,000 liters
Sullage     3,000 liters
Personnel     36
Speed (Service)     13 knots
Speed (Max)     15 knots
Main Engines     4 x Scania D13
Power     4 x 410kW @ 1800rpm
Propulsion     Hamilton Water Jets
Generators     4 x Scania Dl13
Flag     Brazil
Class    RINA
 

(As published in the September 2013 edition of Marine Technologies - www.seadiscovery.com)

Maritime Reporter January 2015 Digital Edition
FREE Maritime Reporter Subscription
Latest Maritime News    rss feeds

Shipbuilding

Huisman Cranes for New Maersk Subsea Support Vessels

In December 2014, Huisman secured a contract from COSCO (Dalian) Shipyard for the delivery of four customized 400mt Rope Luffing Knuckle Boom Cranes and two 100mt

Coast Guard Cutter William Trump Commissioned

The Coast Guard Cutter William Trump was commissioned during a ceremony at Coast Guard Sector Key West Saturday Jan. 24, 2015. The Trump is the 11th fast response cutter in the Coast Guard fleet.

World's Largest Ship Sparks Outrage

Jewish groups in the Netherlands and Britain have reacted with rage and despair at the arrival in Rotterdam of the world's biggest ship, the Pieter Schelte, named

News

Revisions Proposed for Seaway Practices and Procedures

Under agreement with the U.S. Saint Lawrence Seaway Development Corporation, The St. Lawrence Seaway Management Corporation is proposing to amend the joint Practices

The 2nd Ballast Water Management Summit

Sign-up for this year’s most in-depth exchange of information and best venue for BWT stakeholders to network and meet their regulatory peers is underway.   Infocast’s

Britain to Ban Fracking in National Parks

Britain said on Monday it would ban fracking in national parks, reversing a policy announced last year, in a concession to the opposition Labour Party which had

Vessels

InterMoor Completes Juniper Mooring Installation Contract

InterMoor has completed a mooring and foundation installation campaign for bpTT’s Juniper gas project offshore Trinidad and Tobago, reportedly the largest foundation

Huisman Cranes for New Maersk Subsea Support Vessels

In December 2014, Huisman secured a contract from COSCO (Dalian) Shipyard for the delivery of four customized 400mt Rope Luffing Knuckle Boom Cranes and two 100mt

Coast Guard Cutter William Trump Commissioned

The Coast Guard Cutter William Trump was commissioned during a ceremony at Coast Guard Sector Key West Saturday Jan. 24, 2015. The Trump is the 11th fast response cutter in the Coast Guard fleet.

 
 
Maritime Contracts Maritime Security Naval Architecture Navigation Offshore Oil Pipelines Pod Propulsion Port Authority Ship Repair Shipbuilding / Vessel Construction
rss | archive | history | articles | privacy | terms and conditions | contributors | top maritime news | about us | copyright | maritime magazines
maritime security news | shipbuilding news | maritime industry | shipping news | maritime reporting | workboats news | ship design | maritime business

Time taken: 0.1789 sec (6 req/sec)