Jet Edge Waterjets Distributed in 6 States by KF Machinery

MarineLink.com
Tuesday, February 18, 2014
EDGE X-5 Machine: Image courtesy of Jet Edge Inc.

Jet Edge, Inc., a leading manufacturer of ultra-high pressure waterjet systems for precision cutting, coating removal and surface preparation, say that KF Machinery is now distributing Jet Edge precision waterjet cutting systems in Minnesota, North and South Dakota, Nebraska, Western Wisconsin and Western Iowa.

Located in Lakeville, Minn., KF Machinery offers full-service precision sheet metal manufacturing and forming equipment to manufacturers in a variety of industries, including precision sheet metal, metal fabricating, electronics, aerospace, agricultural, plate fabricators and vessel manufacturers.

Jet Edge inform that KF Machinery was established in 2009 as the northern division of Koch Fabricating Machinery Co., of Addison, Texas, a leading supplier of metal fabricating and metal forming machinery and technologies since 1966.

About Jet Edge
Established in 1984, Jet Edge is a global designer and manufacturer of waterjet systems for precision cutting, surface preparation and coating removal. Jet Edge systems are used around the world in a broad range of industries, from the world's leading airlines to automotive, aerospace, industrial manufacturers, machine and job shops. Jet Edge waterjets are made in U.S.A.

Maritime Reporter July 2014 Digital Edition
FREE Maritime Reporter Subscription
Latest Maritime News    rss feeds

People & Company News

Dool to Serve as Chair of SLSMC Board

The St. Lawrence Seaway Management Corporation (SLSMC) announced that Tim Dool has been named as Chair of the Board of Directors, effective September 1. Dool was

Bollore First Half Boosted by Transport, Advertising Unit

French industrial group Bollore said first-half operating income rose 11 percent to 314 million euro because of strength at its transport business and advertising agency Havas,

Scrap Metal Exporter Pens Terminal Agreement

Port Canaveral Scrap Terminal LLC (PCST), a bulk ferrous scrap exporter, has signed a lease with the Canaveral Port Authority to operate a terminal in the north cargo area at Port Canaveral.

Technology

BMT WBM to Showcase TUFLOW at World Bank Seminar

BMT WBM ( (BMT), a subsidiary of BMT Group Ltd, a leading international engineering and risk management consultancy, is delighted to announce that it will be presenting

Senator Kaine Tours NNS Apprentice School

Huntington Ingalls Industries (HII) apprises that it has hosted Sen. Tim Kaine, D-Va., for a tour of The Apprentice School at the company's Newport News Shipbuilding division.

Rosneft Restores Meteorological Observations System in Kara Sea

As part of a large-scale summer Arctic research expedition "Kara-Summer - 2014" a meteorological station was installed that meets the latest modern requirements for such equipment,

Contracts

Skangass Granted Permission for LNG Terminal

The Swedish Government (Länsstyrelsen in Dalarnas Län) has granted Skangass permission to build and operate a new Terminal for LNG (Liquefied Natural Gas) within the harbour in Gävle, Sweden.

Scrap Metal Exporter Pens Terminal Agreement

Port Canaveral Scrap Terminal LLC (PCST), a bulk ferrous scrap exporter, has signed a lease with the Canaveral Port Authority to operate a terminal in the north cargo area at Port Canaveral.

Telemar to Supply Broadband for Herm. Dauelsberg

Telemar GmbH, the German subsidiary of the Telemar Group, closed an agreement with Herm. Dauelsberg for the supply of a complete “turn-key solution” for their fleet of 18 vessels.

Shipbuilding

Royal IHC Starts Building EasydredgeTM 2700

Royal IHC (IHC) is constructing the first vessel in its range of competitively priced standard trailing suction hopper dredgers (TSHD). It has started to build

MN 100: Horizon Shipbuilding, Inc.

13980 Shell Belt Road Bayou La Batre, AL 36509 E-mail: trshort@horizonshipbuilding.com Website: www.horizonshipbuilding.com President and General Manager: Travis R.

MN 100: Kvichak Marine Industries, Inc.

469 NW Bowdoin Place Seattle, WA 98107 Telephone: 206 545 8485 E-mail: sales@kvichak.com Website: www.kvichak.com CEO/President: Keith Whittemore Number of

Marine Equipment

Royal IHC Starts Building EasydredgeTM 2700

Royal IHC (IHC) is constructing the first vessel in its range of competitively priced standard trailing suction hopper dredgers (TSHD). It has started to build

General Dynamics Delivers North Dakota (SSN-784) to U.S. Navy

General Dynamics Electric Boat yestereday delivered the nuclear-powered attack submarine North Dakota (SSN-784) on time and more than $30 million below target cost.

Daihatsu Joins ClassNK Research Project

Classification society ClassNK announced that it will embark on a joint research project together with Daihatsu Diesel Mfg. Co., Ltd. Through the partnership, ClassNK

 
 
Maritime Careers / Shipboard Positions Maritime Standards Naval Architecture Navigation Pod Propulsion Port Authority Ship Electronics Ship Repair Sonar Winch
rss | archive | history | articles | privacy | terms and conditions | contributors | top maritime news | about us | copyright | maritime magazines
maritime security news | shipbuilding news | maritime industry | shipping news | maritime reporting | workboats news | ship design | maritime business

Time taken: 0.2074 sec (5 req/sec)