Marine Link
Thursday, March 28, 2024
SUBSCRIBE

Drive Systems News

07 Mar 2024

SCHOTTEL to Equip Med Marine's Six New ASD Tugs

The SCHOTTEL RudderPropeller  (Image: SCHOTTEL)

SCHOTTEL is to equip six new ASD tugs of the Turkish Med Marine Group with the SCHOTTEL RudderPropeller (SRP). The new vessels will be built by Med Marine’s Ereğli Shipyard and will be available in 2025 to meet the constantly growing demand for Med Marine tugs. A total of 12 SCHOTTEL RudderPropellers in the SRP 360, SRP 430 and SRP 490 series will be built for the new vessels by the German manufacturer of marine propulsion systems. The new tugs will cater for a range of different bollard pull requirements in the 50-…

19 Dec 2023

Anschütz Advances the Autonomous Bridge System

Anschütz

As part of the Clean Autonomous Public Transportation Network (CAPTN) initiative, Anschütz' research into autonomous systems and assistance systems onboard ships that support navigators has made progress in 2023. In the Remote Operating Centre (ROC) which is set up on land at Anschütz, the MV Wavelab -- a research catamaran that is operating on a maritime test field on the Kiel Fjord in Germany -- is monitored. Part of the ROC is a complete digital twin with all the data provided by the various existing and experimental sensors and systems on board the Wavelab.

17 Nov 2023

HGK Orders "Future-Fuel-Ready" Dry Goods Carrier

Illustration: Illustration of the newly constructed dry goods vessel for Salzgitter Flachstahl (Copyright: HGK Shipping)

HGK Shipping ordered from De Gerlien van Tiem shipyard in Druten, Netherlands, a new, low-emission dry goods vessel, a vessel to be specially tailored to the requirements of Salzgitter Flachstahl. Equipped with a diesel-electric drive system and solar panels and designed to be “future-fuel-ready”, the new vessel is outfitted to make a contribution to the sustainability ambitions of HGK Shipping and Salzgitter AG. Once it goes into service, it will replace one of the three vessels from the existing fleet…

24 Aug 2023

Wärtsilä to Supply Propulsion for Brazilian Navy’s Polar Vessel

Rendering of the new Polar Vessel – Navio Polar Almirante Saldanha (NPo) – being built for the Brazilian Navy (Image: © Navio Almirante Saldanha)

Wärtsilä announced it has been tapped to supply the main power generation and power conversion system for a new 103.16m Antarctic Support Vessel being built for the Brazilian Navy at Brazil’s Estaleiro Jurong Aracruz shipyard.The new Polar Vessel – Navio Polar Almirante Saldanha (NPo) – will be operated by the Brazilian Navy and is of strategic importance for maintaining the Brazilian presence in the Antarctic continent and ensuring the continuity of the scientific research that…

05 May 2023

HGK Shipping Holds Double Naming Ceremony for Chemical Tanker Duo

German company HGK Shipping on Thursday held a naming ceremony for two chemical tankers “Courage” and “Curiosity” on 4 May 2023.The chemical tankers have already been in service for the materials manufacturer, Covestro, on the river Rhine and its tributaries for several weeks. The hulls of the shallow-water vessels are 93 metres long and 10.5 meters wide. The two sister vessels are able to carry a load weighing 160 tonnes in a draught of just 1.00 meter and still be fully operational and maneuverable…

02 Mar 2022

Underwater Radiated Noise: What’s Missing for Design?

Image courtesy HydroComp

We all acknowledge the environmental impact of Underwater Radiated Noise (URN) from ships, and the challenges it poses for shipping companies and shoreside organizations. While noise is produced by drive systems and other mechanical components, noise specifically from the propeller can be particularly damaging since it is the source with the greatest URN strength and propagation distance. Mitigating this type of URN production is also of timely interest, as certain whale populations…

16 Dec 2022

Marell Boats, Scania Develop Hybrid Interceptor

©Marell

Sweden-based Marell Boats and Scania Power Solutions are working to develop what they say is are next-generation sustainable and technologically advanced vessels as they prepare the launch of the M17 Patrol vessel with a hybrid driveline. The companies said they were collaborating to create "a sustainable and state-of-the-art vessel to meet the increased demand for hybrid solutions." According to the two firms, the M17 Patrol will become the most energy-efficient hybrid high-speed…

18 Nov 2021

Leading the Charge

Crowley’s new eWolf will be the first all-electric tugboat in the U.S. (Image: Crowley)

Alternatives to fossil fuels are emerging throughout the maritime universe, and vessels working in U.S. rivers, waterways and harbors are at the cusp on this trend. While the alternative fuels spectrum is wide, battery power and electrification—a technology that has seen a decade of shipboard applications already—is particularly suited for smaller vessels.Crowley Maritime Corp will be taking delivery of a completely electric tugboat, dubbed eWolf; the boat- which will include kit for advanced vessel control tied to an electric propulsion system from ABB…

15 Nov 2021

ABB to Deliver Magnet Shaft Generators for Himalaya's Bulk Carriers

Credit: ABB

ABB will deliver an equipment package for Himalaya Shipping's ultra-large bulk carriers that will feature innovative shaft generators with a Power-Take-Off (PTO) solution, comprising new drive systems and permanent magnet technology.The equipment will improve the energy efficiency of the ultra-large bulk carriers by up to four percent while enhancing operational flexibility, and save about 20 percent of space on board compared to a conventional solution.ABB will deliver an integrated scope of solutions with permanent magnet shaft generators at its core for twelve 210…

23 Feb 2021

Tech File: COBRA Battery System Receives Class Certification

Dirk Lehmann (left) and Godehard Gauf (right). © Becker Marine Systems

With DNV GL certification obtained in February 2021, the COBRA battery system from Becker Marine Systems can be used for a wide range of inland waterway and maritime shipping applications, and due to demand, Becker is expanding COBRA production at its Winsen (Luhe) location.Tailor-made for maritime, the COBRA system now has full certification including IEC 62619 and IEC 62620 and can now be installed on board inland waterway and ocean-going vessels. “We have achieved the highest…

18 Jan 2021

Chengxi Delivers Self-unloading Transshipment Newbuild to Oldendorff

21,500-DWT transshipment bulker Alypso (Photo: ABB)

China’s Chengxi Shipyard has delivered the first of twin self-unloading transshipment newbuilds for Germany’s largest bulk carrier owner Oldendorff Carriers.Juha Koskela, Division President, ABB Marine & Ports, said the newbuilds are the first bulk carriers to feature Azipod propulsion.The delivery saw two 1.9-MW Azipod units installed on each of the 21,500-DWT transshipment bulkers as part of a package of electric, digital and connected solutions from ABB. The scope of supply also included diesel-electric power plant…

14 Oct 2020

ABB's Batteries for KNOT Shuttle Tankers

Credit: ABB

ABB has won a contract to equip KNOT's shuttle tankers with battery technology and other electric solutions, with the aim of making the vessels fuel-efficient and reducing emissions. Once complete, the shuttle tankers will go on a charter with Norwegian oil company Var Energi.Under the contract awarded by the South Korean shipbuilder Daewoo Shipbuilding & Marine Engineering, ABB Marine & Ports will deliver the power and control technology for the two new KNOT shuttle tankers.ABB’s scope of supply will also include the shaft generator system…

09 Jun 2023

Gumbs to take the Helm of Bosch Rexroth North America

Greg Gumbs will be the new President and CEO of Bosch Rexroth North America when Paul Cooke retires on December 1, 2020.

Paul Cooke, President and CEO of Bosch Rexroth North America, based in Charlotte, NC, USA, will retire on December 31, 2020 after 38 years of service in various international positions within Bosch Rexroth. His successor as of December 1, 2020 will be Greg Gumbs, most recently Vice President & General Manager Electrical Automation Solutions at EATON Corporation. Gumbs will join Bosch Rexroth effective September 1, 2020 in preparation for his future responsibility and will be based at Bosch Rexroth North American headquarters in Charlotte…

21 Nov 2019

Sendo Liners Green Entry to Amsterdam

Is Port of Amsterdam in sight? Then it's time to turn the diesel engine off and the electric motor on. That's the agreement that has been made with Sendo Shipping.By 2020, two of their Sendo Liners will be entering the port of Amsterdam emission-free. Port of Amsterdam has a stake in these new ships in the form of a loan.The Sendo Liners are inventive hybrid container ships. Much lower emissions, much lower fuel consumption and more cargo space. No less than 8% extra loading capacity! That's exactly one extra container length.With the Sendo Liners, Port of Amsterdam aims to make an active contribution to a more environmentally friendly future for shipping.

04 Jun 2019

MAN Wins Order for Battery-Hybrid Dual-Fuel System

The MAN 35/44DF engine (Photo: MAN Energy Solutions)

The Damen Gorinchem Holland shipyard has ordered a hybrid-propulsion solution from MAN Energy Solutions in connection with the building of 2 × dual-fuel/hybrid RoRo ferries for Canadian outfit, Seaspan Ferries Corporation. The order covers the provision of MAN 35/44DF dual-fuel engines, fuel gas-supply systems and the main electric systems, including batteries.MAN Energy Solutions will provide the solutions in association with Aspin Kemp & Associates (AKA), in which it has a 40% stake.

20 May 2019

MAN Powers LNG-powered Ferry Newbuild

Photo: Man Energy Solutions

The Jinling Shipyard in China has ordered 4 × MAN 51/60DF engines in connection with the building of 1 + 1 × 230-meter-long RoPax vessels for TT-Line, the German ferry operator. The vessel will feature a complete MAN propulsion package, besides the engines, including propellers, a fuel-gas-supply system (FGSS), and HyProp ECO – MAN’s innovative, fuel-saving, hybrid propulsion system.The newbuilding is based on TT-Line’s ‘Green Ship’ design, developed in collaboration with Copenhagen-based designer…

06 May 2019

Hapag-Lloyd Names "Hanseatic nature" in Hamburg

Hapag-Lloyd Cruises presented the Hanseatic nature for the first time in Hamburg on Saturday (May 04, 2019).The provider of adventure and classic cruising with luxury voyages to Polar Regions, Caribbean, Central America, Europe & more said that Hanseatic nature is the first of three, structurally- identical ships in the cruise line’s new expedition class. The ship left Hamburg on May 5, 2019 for its inaugural cruise, which will take it to the Hebrides, Orkney Islands and Shetland Islands, finishing in Bergen. This summer, the ship will visit the Arctic.The Hanseatic nature is a small, manoeuvrable and expedition ship, to be positioned in the 5-star segment. Its construction, design and routes revolve around providing a true expedition experience and getting as close as possible to nature.

21 Jan 2019

DEUTZ Commits to Renewable Mobility

Photo: DEUTZ

On January 21 and 22, DEUTZ will be attending the 16th International Conference on Renewable Mobility in Berlin, reprising its role as silver sponsor and underlining its commitment to the development of carbon-neutral drive systems. As well as pressing ahead with the electrification of its engine range under the E-DEUTZ strategy, DEUTZ is working hard to make its products compatible with a choice of sustainable fuels that can be used in its products.Running engines without using…

11 Jun 2018

Volvo Penta Going Full Charge into Hybrid & All-electric Drivelines

Volvo Penta’s chief technology officer, Johan Carlsson, and system engineer, Karin Åkman, discuss innovation for electromobility at the company’s new development-and-test laboratory in Gothenburg. (Photo: Volvo Penta)

Aiming to become a driving force in sustainable power solutions, Volvo Penta says it is going full charge into hybrid and all-electric drivelines, offering electrified solutions in both its marine and industrial segments by 2021.Volvo Penta’s chief technology officer, Johan Carlsson, and system engineer, Karin Åkman, discussed innovation for electromobility at the company’s new development-and-test laboratory in Gothenburg.By 2021, Volvo Penta will provide electrified power solutions for both its land and sea-based business segment…

27 Apr 2018

Factoring Life Cycle Variables Enables Intelligent Motor-drive Purchases

Cranes and winches in particular can benefits from this practice.Early electric motors were operated at one speed, guided by available current and voltage and often drive belt and pulley systems that mechanically controlled system speed and power. As motors evolved, efficiency improved, mostly by changing output control from mechanical to electrical and eventually leading to the creation of modern adjustable speed drives (AC drives).Today, the largest potential for electric motor energy savings lies in system- and process-level optimization.

19 Jan 2018

Battery Hybrid Patrol Boat under Development

(Image: PBES)

PBES and NORIS Automation GmbH have partnered on the hybrid drive systems for Europe’s first battery hybrid patrol vessel. The 45m long vessel is being built at Baltic Workboats Shipyard in Estonia and will be delivered with 273kWh of PBES Power 65 battery modules. “PBES batteries provide hours of low speed propulsion with reduced sound and heat signature as well as greatly increased efficiency,” said Brent Perry, PBES Chief Executive Officer. “The vessel is first of many that we will be seeing in law enforcement.

19 Oct 2017

Keel Laid for Hapag-Lloyd Cruises Expedition Ship

The next stage of construction for the second of the two new expedition ships for Hapag-Lloyd Cruises has been set in motion with a keel laying ceremony for the HANSEATIC inspiration held on October 18, 2017, in the Romanian port of Tulcea. The cruise line’s CEO, Karl J. Pojer, laid a specially produced coin in the first steel block of what will become the ship’s hull. As with its sister ship, the HANSEATIC nature, the coin was welded into the block and will bring the new vessel good fortune on all future expeditions. The keel laying of the HANSEATIC inspiration at the Vard shipyard in Romania will be followed by more milestones, such as the float-out of the hull and the completion of the external construction work.

05 Oct 2017

Deutz Buying Binge Continues

Michael Wellenzohn, member of the Board of Management of DEUTZ AG for Sales/Service & Marketing

In the wake of its acquisition of the electric drive specialist Torqeedo GmbH, Deutz announced today that it will acquire IML Motori, an Italian sales and service partner based in Lomagna near Milan, a move which simultaneously strengthens its presence in Italy and gives the company market penetration in the service segment. The subsidiary IML Service and the Romanian sales and service company IML Motoare also form part of the acquisition. Deutz is looking to drive growth in its profitable service business and increase its proximity to customers in the Mediterranean.