Marine Link
Friday, March 29, 2024

New Cranes for Helsingborg, St. Petersburg Ports

Maritime Activity Reports, Inc.

November 10, 2016

Two fully assembled LHM 550 ready to roll-off the vessel and start operating at Container Terminal St. Petersburg right away (Photo: Liebherr)

Two fully assembled LHM 550 ready to roll-off the vessel and start operating at Container Terminal St. Petersburg right away (Photo: Liebherr)

Liebherr Maritime Cranes recently delivered a new mobile harbor crane, type LHM 550, to the Port of Helsingborg. In addition, Container Terminal St. Petersburg got two machines of the same type. All three machines are equipped with electric prime movers.

 
At the end of August, a new Liebherr mobile harbor crane, type LHM 550, the latest investment by Port of Helsingborg arrived at the Västhamnen. The crane was shipped fully assembled by barge from the Liebherr facility in the Port of Rostock.
 
“The crane was ready for operation immediately after rolling off from the barge onto our new quay. Together with the new pier, this state-of-the-art mobile harbor crane provides the basis for further expansion of the container business in the Port of Helsingborg. We increased the container handling capacity by 50 percent,” said Niels Vallø, CEO Port of Helsingborg.
 
The crane is equipped with a twin lift container spreader that can handle two 20-foot containers at the same time. Apart from container handling the crane can be adapted for project cargo and different special lift applications.
 
“The most decisive factor to opt for a LHM 550 is Liebherr’s arrangement of the drive system. The new crane is capable of running either on electricity or diesel, a feature which we highly value. The diesel engine gives us the freedom to move and position the crane at any pier we want. Once in place, we connect the crane to the main power supply, switch on the e-drive and operate the crane with eco-friendly energy,” Vallø said.
 
Almost simultaneously Container Terminal St. Petersburg has taken in two new Liebherr mobile harbor cranes, type LHM 550, also shipped from the Liebherr factory in Rostock.
 
“Both cranes are equipped with a low voltage electric main drive. Plug in and turn the e-drive on. As long you have electricity the crane will work, but also in case you don’t have power there is still the diesel engine ensuring your operation never stops,” said Maxim Kim, Area Manager of Liebherr Maritime Cranes.
 
Scope of supply included two spreaders as the main task in the port is container handling. To ease the handling of big vessels the crane is equipped with a 4.8 meters tower extension. Thus, the elevated tower cabin provides the driver with an unrestricted view over the vessel.
 
Both LHM 550 come in a four-rope configuration, which means true multifunctionality. With a quick change of the lifting attachment the spreader can be replaced by a mechanical grab. “Within minutes the Liebherr mobile harbor cranes turn into bulk handling machines. In that particular case, the cranes are used for the handling of aluminiumoxid,” Kim said.
 
The terminal also benefits from the existing service-setup in St. Petersburg. The huge population of Liebherr mobile harbor cranes in the area can rely on on-site service engineers as well as a sorted spare parts stock for immediate troubleshooting.

Subscribe for
Maritime Reporter E-News

Maritime Reporter E-News is the maritime industry's largest circulation and most authoritative ENews Service, delivered to your Email five times per week