Maritime Plate Heat Exchangers Highlighted by GEA

MaritimePropulsion.com
Sunday, August 04, 2013
Image courtesy of GEA

GEA Heat Exchangers, represented in Russia and CIS by its subsidiary GEA Mashimpeks, will present sealed, high-performance plate heat exchangers for high-level output in use with maritime engines at the upcoming NEVA 2013 Expo.

These heat exchangers provide dedicated cooling of engine fuel, which reduces the viscosity below the level recommended by leading engine manufacturers. In addition, the fuel burns with less residue and emits less pollution.

The models in GEA's  NT range  of heat exchangers cool the light fuel oil in use; in addition, they are flexibly scalable and have a small footprint. In addition, the fuel burns with less residue and emits less pollution.

These plate heat-exchanger coolers are externally installed, which enables retrofitting without difficulty. No modifications are necessary for the engine itself.

The NT range was especially developed for maritime use.  Its OptiWave technology assures maximum flow over the entire plate surface and guarantees a high heat-transfer rate. The plates are exactly positioned with the aid of GEA PosLoc technology, to ensure that the seals remain fully functional longer, according to the manufacturers, the result is a stable, perfectly aligned, and tightly sealed plate package.

GEA will be exhibiting this and other products at NEVA 2013, 
September 24 to 27, 2013. in 
St. Petersburg, Russian Federation
at, at the Lenexpo Fairground, Hall 8.

http://www.gea-heatexchangers.com/

Maritime Today


The Maritime Industry's original and most viewed E-News Service

Maritime Reporter January 2016 Digital Edition
FREE Maritime Reporter Subscription
Latest Maritime News    rss feeds

Technology

Novoship to Install Ecochlor BWTS on 4 Tankers

SCF Novoship Technical Management has selected the Ecochlor Ballast Water Treatment System (BWTS) to be retrofitted on three Aframax Oil Tankers and one Product Carrier.

DCNS Deploys 3DEXPERIENCE Solution

Dassault Systèmes and DCNS partner on the 3DEXPERIENCE innovation platform for next generation naval defense solutions   Multi-disciplinary, Collaborative Innovation

Hapag-Lloyd Sees Uptick of Incorrectly Declared Dangerous Goods

Year-on-year increase of 65 percent; more than 4,300 cases worldwide   Container shipper Hapag-Lloyd said it registered considerably more incorrectly declared dangerous goods last year,

Marine Propulsion

Seaspan Venture: Like for Like

“We don’t usually remove the heads at mid-life on the Cummins engines,” Randy Beckler, Shore Engineer for Seaspan Marine, explained in reference to the 2003 launched

SevenCs Supports MariGreen Project

SevenCs is part of the EU INTERREG V A cross-border project “MariGreen” to support the maritime industry in the transition towards more efficient, greener and more sustainable shipping.

Australian Navy Commissions HMAS Adelaide

Royal Australian Navy commissions second LHD HMAS Adelaide powered by GE LM2500 marine gas turbines   GE Marine reports that its LM2500 gas turbines now power

Environmental

SevenCs Supports MariGreen Project

SevenCs is part of the EU INTERREG V A cross-border project “MariGreen” to support the maritime industry in the transition towards more efficient, greener and more sustainable shipping.

LNG Bulker Cements Thordon's Green Future

Sea trials aboard Greenland, the world’s first LNG-fuelled short-sea dry bulk vessel, have validated the performance of Thordon Bearings COMPAC propeller shaft solution,

New Offshore Vessel to be Fitted with Cathelco BWTS

Cathelco is supplying a ballast water treatment (BWT) system for a new offshore vessel built by Eastern Shipbuilding Group Inc., for Harvey Gulf International Marine, LLC.

Fuels & Lubes

SevenCs Supports MariGreen Project

SevenCs is part of the EU INTERREG V A cross-border project “MariGreen” to support the maritime industry in the transition towards more efficient, greener and more sustainable shipping.

LNG Bulker Cements Thordon's Green Future

Sea trials aboard Greenland, the world’s first LNG-fuelled short-sea dry bulk vessel, have validated the performance of Thordon Bearings COMPAC propeller shaft solution,

Norway will be Lithuania's 2016 Top Gas Supplier

Lithuania will import more gas from Norway than from former sole supplier Russia in 2016 after developing infrastructure to support liquefied natural gas (LNG) imports,

Marine Power

Seaspan Venture: Like for Like

“We don’t usually remove the heads at mid-life on the Cummins engines,” Randy Beckler, Shore Engineer for Seaspan Marine, explained in reference to the 2003 launched

SevenCs Supports MariGreen Project

SevenCs is part of the EU INTERREG V A cross-border project “MariGreen” to support the maritime industry in the transition towards more efficient, greener and more sustainable shipping.

Australian Navy Commissions HMAS Adelaide

Royal Australian Navy commissions second LHD HMAS Adelaide powered by GE LM2500 marine gas turbines   GE Marine reports that its LM2500 gas turbines now power

 
 
Maritime Security Naval Architecture Navigation Pipelines Pod Propulsion Port Authority Ship Electronics Ship Repair Ship Simulators Winch
rss | archive | history | articles | privacy | contributors | top maritime news | about us | copyright | maritime magazines
maritime security news | shipbuilding news | maritime industry | shipping news | maritime reporting | workboats news | ship design | maritime business

Time taken: 0.0697 sec (14 req/sec)