20-25% more holding power than Manson Supreme anchor in most seabeds.
Manson Anchors has introduced the Boss Anchor – the New Zealand-based company’s most technically-advanced, safest anchor ever. “An anchor is first and foremost a safety item. When a customer puts their family’s life and their boats value in your hands, you treat that trust with the utmost responsibility. There are no shortcuts or cheaper alternatives when lives are at risk. Our new Boss anchor is the culmination of Manson’s 39 years of manufacturing anchors with integrity, to the highest possible standards,” said Manson CEO Steve Mair.
The new Manson Boss boasts an average of 20-25% more holding power than the Manson Supreme in most seabeds. As with all Manson anchors, the Boss is manufactured at Manson’s purpose built facility in Henderson, New Zealand by Lloyd’s Register approved welders and using approved mill steel. The Boss is packed with features and patented technology.
The shank, made from high tensile, Lloyd’s Register-approved (minimum 800mpa) steel, features the new, patented shackle Preventa and has been FEA optimized for strength. This puts weight in the right places with savings made in non-essential areas. The weight savings are transferred into the fluke to ensure even more holding power. The unique FEA designed hole in shank for weight savings also doubles as a retrieval hole for attaching a second anchor to operate in tandem or buoyed retrieval line. Shank clearance has been streamlined for access into tight pulpits on motorboats.
Roller flaps have been specifically designed to make the anchor roll and adopt the correct setting attitude immediately upon connection with the sea floor. A double-reinforced nose is twice the thickness and geometrically designed to give the strongest, tip welded for higher MPA. Like a wear edge on a digger bucket, this reinforced area lasts twice as long as other anchor edges and is weld hardened for long life.