ESAB Introduces New Warrior Series

Press Release
Monday, December 03, 2012
Warrior Machine

ESAB Welding & Cutting Products introduces Warrior – a new multi-process power source and feeder designed for shipbuilding, rail car construction, mobile machinery construction, energy generation construction, pipe welding, general fabrication, and repair and maintenance.

 

Designed for GMAW (MIG), FCAW (Flux-Cored), SMAW (Stick), and GTAW (TIG) welding, as well as ACAG (Arc Gouging), Warrior delivers up to 500 amps @ 60% duty cycle.  



“Our customers told us they needed a rugged, workhorse of a machine that could withstand harsh welding environments,” said Greg Stauffer, Vice President for Sales Support and Standard Equipment (ESAB North America).
“Warrior gives them superior welds time after time - you have the reliability and efficiency of inverter technology.”



Designed with input from welders, Warrior carbon arc gouges with electrodes up to 3/8” diameter, welds .030 – 5/64 inch flux-cored and solid wires, and has a full range of SMAW (Stick) capabilities with excellent 7018 and 6010 performance.



Warrior delivers consistent, reliable performance.   Warrior’s air tunnel design creates a “dirty” air side and a separate “clean” air side to ensure long-term reliability of critical electronics.  



Warrior’s durable external body withstands the elements. Its’ IP23 rating is designed to endure harsh outdoor environments - up to 60 degree driving rain. Ergonomically designed handles are built to withstand mechanical hoisting, and double bend 14 gauge steel side panels protect Warrior against collisions and drops.



Warrior is easy to use. The user-friendly design places all controls on the front panel – including the power switch.  The knobs are protected, and are designed for use when wearing welding gloves.  Warrior’s simple and clear user interface makes it easy for anyone to get started welding within a few seconds.



Warrior is perfect for remote job sites.  It is generator-compatible, and the sun-friendly display makes it easy to see your settings when welding outside.   



In addition to the Warrior power source, the Warrior Feed 304 is an all-new rugged, user-friendly wire feeder.  It features a high-torque 4-roll drive, which gives superior feed even with long GMAW (MIG) guns and better feedability than a 2-roll drive.  This feeder includes all the controls you need to get the job done – including remote voltage, gas purge, inch wire, and wire feed speed (WFS), trigger lock, and slow run-in.



Warrior Feed 304’s sun-friendly display and wider viewing angles make it easy to read your settings outdoors, and the knobs are designed to be used while wearing welding gloves.
 


With more than 100 years of experience, ESAB Welding & Cutting Products is one of the world’s largest and most skilled manufacturers of welding and cutting equipment and welding filler metals. Recognized as the technological leader in the industry, ESAB is committed to providing customized solutions for their customers.
 

 

Maritime Reporter June 2014 Digital Edition
FREE Maritime Reporter Subscription
Latest Maritime News    rss feeds

People & Company News

Top Ships Enters 3 New Charters

TOP Ships Inc., an international owner and operator of modern, fuel efficient "ECO" MR tanker vessels focusing on the transportation of petroleum products, announced

There’s Still Time for SHIPPINGInsight Award Entries

Entry submissions for the first SHIPPINGInsight Award are due Friday, Aug. 1, but organizers said they will continue to accept nominations through following week to provide some extra time.

Rio Tinto Pulls Plug on Mozambique Coal Venture

Rio Tinto has agreed to sell coal assets it bought through a $4 billion acquisition of Riversdale in 2011 for just $50 million to an Indian joint venture, ending

New Products

New AVEVA ISM Bridges the Gap

AVEVA launches a new application for governing asset information using a standards-based methodology. AVEVA announced the launch of AVEVA Information Standards Manager (AVEVA ISM),

XtendFRESH Now Available from Carrier Transicold

The XtendFRESH atmosphere control system, which preserves quality and extends shipping distances for perishables shipped in refrigerated containers, is now available from Carrier Transicold.

Voith to Exhibit High Efficiency and DP Systems at SMM

At this year’s SMM in Hamburg, Voith will showcase propulsion systems and vessel concepts focusing on high efficiency and dynamic positioning even under challenging conditions.

Shipbuilding

ATB Barge Project for Murray & Associates

Murray & Associates, LLC has been commissioned to deliver a comprehensive design package for an 185,000 BBL Chemical Tank Barge new construction project. The

Gladding-Hearn Builds New Boat for Delaware Pilots

The Delaware pilots association has ordered its third pilot boat of the popular Chesapeake class from Gladding-Hearn Shipbuilding, Duclos Corporation. Delivery

Burger Boat to Build New Passenger Vessel

Burger Boat Company announced that it has received a contract for the construction of an 89-foot (27-meter) steel passenger vessel for Wendella Sightseeing Company, Chicago, Ill.

Ship Repair & Conversion

Joint Project Studies Condition-based Engine Monitoring

Classification society ClassNK announced that it will participate in a joint project together with Mitsui Engineering & Shipbuilding Co., Ltd. and MES Technoservice Co.

Bollinger Fourchon: 13 Years Without a Lost Time Accident

Bollinger Shipyards, Inc. announced that their Bollinger Fourchon, L.L.C. facility has worked 13 years without a lost time accident. Building on a philosophy that starts at the top,

Combat Cold Corrosion via Condition Monitoring

Parker Kittiwake explains why frequent condition monitoring is the most effective measure in combating the recent cold corrosion phenomenon The recent trend in

Marine Equipment

Total E&P is First to Use FROG-XT4

Total E&P is the first to use Reflex Marine’s newly developed FROG-XT4 on the Odudu field in Nigeria. The French operator purchased the crew transfer device

Joint Project Studies Condition-based Engine Monitoring

Classification society ClassNK announced that it will participate in a joint project together with Mitsui Engineering & Shipbuilding Co., Ltd. and MES Technoservice Co.

DNV Type Approved Anchor Winch for the Arctic Prowler

JK Fabrication has landed DNV certification for its 40-30-3000-DNV series Anchor Winch. Culminating a two-year process, JK’s C-series winch was at last awarded

 
 
Maritime Contracts Maritime Security Naval Architecture Navigation Offshore Oil Pipelines Ship Electronics Ship Repair Ship Simulators Shipbuilding / Vessel Construction
rss | archive | history | articles | privacy | terms and conditions | contributors | top maritime news | about us | copyright | maritime magazines
maritime security news | shipbuilding news | maritime industry | shipping news | maritime reporting | workboats news | ship design | maritime business

Time taken: 0.1591 sec (6 req/sec)