Marine Link
Friday, March 29, 2024
SUBSCRIBE

Autoship Systems Corporation News

12 Jan 2022

Autoship Systems Corp. Launches Offshore Stability Solution for Jack-ups. Bags Contract with Seaway 7

Canadian firm Autoship Systems Corporation (ASC) in cooperation with its Norwegian reseller, Coastdesign Norway (CDN), has developed an offshore stability software for jack-up vessels called - the Autoload® - Jack Up version and has won a contract to install the solution onboard Seaway 7’s first self-propelled jack-up vessel, VIND 1. Autoload is also installed onboard their entire fleet of vessels which include open deck semi-submersible heavy transportation vessels, cable lay, heavy lift crane installation, and Installation support vessels, Autoship Systems said.

05 Oct 2021

Pesquera Diamante Upgrades Its Design Software

Lines plan for a purse seine vessel developed in Autoship Pro by Pesquera Diamante (Image: Autoship)

Autoship Systems Corporation (ASC) of Vancouver, Canada has been supplying the marine industry with its Autoship Pro (hull design) and Autohydro Pro (hydrostatics and stability) software for over 40 years. These two programs combined has resulted in many hundreds, if not thousands of ships at sea, including ocean going fish trawlers.Pesquera Diamante in Lima, Peru is a current Autoship System user that has engineered over a dozen purse seiner vessels for its integrated operations that include a fish processing facility, using our hull design and hydrostatics programs.

15 Mar 2021

Autohydro: User-friendly Engineering Software for Class Approval

(Photo: Autoship)

Autoship Systems Corporation (ASC) supplied Boksa Marine Design (BMD) with its latest Autohydro 6.10, offering yet more features and tools leading to new efficiencies for calculating hydrostatic parameters, stability and longitudinal strength. BMD, a naval architecture and marine engineering firm located in Lithia, Fla., has designed and engineered more than 600 completed projects up to 740-feet for over 50 clients since 2003, including leading shipyards.Specializing in full-scale…

06 Jul 2016

ASC’s Autoload Onboard Stability Software Turns 25

Bourbon Evolution 809 shown in Autoload (Image: ASC)

Autoship Systems Corporation (ASC) of Vancouver, Canada announced that its onboard stability software Autoload is celebrating 25 years in the marine loading computer market. Installed on thousands of ships, rigs and platforms worldwide, Autoload can be found onboard virtually every type of vessel. ASC said it adopted a simple yet sophisticated philosophy for developing Autoload from the start: the program must be simple to use yet apply accurate mathematical analyses to all calculations.

22 Jul 2010

ASC Chosen for North Sea Platform

Autoship Systems Corporation (ASC) of Vancouver, Canada announced the installation of its Autoload onboard stability software on Gjøa, one of the largest projects in the North Sea today. Gjøa's recoverable reserves are approximately 82 million barrels of oil and condensate and roughly 40 billion standard cubic metres of gas. More than 200 km of pipeline are to be laid at Gjøa as well as the cable that is going to supply the platform with power from shore. It will be the first floating platform to get its electricity from the mainland. This will mean a yearly reduction in emissions to the environment of 250,000 tonnes of carbon dioxide. Autoload is a real time monitoring and simulation tool for planning vessel stability.

12 Mar 2010

Keppel Shipyard Singapore Chooses Autohydro

Autoship Systems Corporation (ASC) of Vancouver, Canada is supplying additional licenses of its Autohydro hydrostatics and stability calculations software to Keppel Shipyards of Singapore. Keppel Offshore currently operates with 8 Autohydro licenses and now their sister company, Keppel Shipyard, will add a second license. Autohydro 6.4 stability software Auto-Ballast function will automatically calculate tank fills for selected tanks to satisfy given targets. (www.autoship.com)

23 Jul 2009

Autoship Produces the Galatea

Autoship Systems Corporation (ASC) of Vancouver, Canada is pleased to announce the launching of M/V Galatea. Built for the ARPA (Environmental Protection Agency for the Sicily Region), this 78.7 ft research vessel was designed and built using ASC’s entire CAD/CAM software suite. The ASC CAD/CAM suite includes a number of integrated programs, each of which performs specific functions for vessel design and construction. The suite features Autoship (hull and superstructure design)…

08 Jun 2009

Autoload Stability Software on Olympic Zeus

Autoship Systems Corporation (ASC) of Vancouver, Canada announced the sale of their onboard stability software, Autoload, to Olympic Shipping AS for their latest environmentally friendly new-build, Olympic Zeus. Olympic Zeus is an anchor handling tug supply construction vessel designed by Ulstein Design AS and one of the biggest vessels of this type built by Ulstein Verft AS. Developed for advanced operations in deep sea conditions, Olympic Zeus operates with a new type of optimum fuel saving hybrid propulsion machinery which was developed by Ulstein Design AS.

18 Mar 2009

ECO Fleet to be Outfitted with Autoload

Autoship Systems Corporation announced that Edison Chouset Offshore LLC (ECO) of Galliano, LA, USA has chosen to have their offshore fleet of vessels outfitted with the Autoload onboard stability program. “The delivery of the Autoload software will be a staged roll-out for the ECO fleet. The initial install is set for 68 of the latest-delivered and soon-to-be delivered vessels. Staging after this group will be the remainder of the ECO deepwater fleet, inclusive of PSVs, AHTSVs and Deep Water Support Vessels. When the effort is completed, over 150 ECO vessels will be fitted with the Autoload software.” stated Gary Rook, Technical Director for ECO.

27 Feb 2008

ASC Supplies Software to HEISCO

Autoship Systems Corporation (ASC) of Vancouver, Canada is pleased to announce a new installation of its naval architecture and ship production software to a shipyard client in the Middle East. HEISCO (Heavy Engineering Industries & Shipbuilding Co.) has chosen ‘The AutoSHIP WORKS Package’ which will allow them to take a new project through the complete design spiral - from hull lines right through to nested parts - in a shorter timeframe. The Marine division of HEISCO was established in 1974 (as Kuwait Shipbuilding and Repair Yard Co.) to meet the needs of the shipping and maritime industry in the Northern Arabian Gulf. Over the years the Marine division has diversified its initial core business activities to meet requests for new engineering projects.

07 Oct 2003

CAD/CAM

Scheduled for a September 2003 release, the next major revision of the 3-D product modeling software for shipbuilding and offshore platforms from Albacore Research Ltd., ShipConstructor2004, will include a full Heating, Ventilation and Air-Conditioning module (HVAC). HVAC is a fully integrated member of the ShipConstructor suite of Structure, Automatic and Manual Nest, NC Code generation, Outfit, Pipe, Fairing, and Lofting tools. To facilitate automatic report generation, HVAC makes full use of ShipConstructor's SQL Server product database. As with all ShipConstructor modules, HVAC is a full 3-D modeling package; this reduces drafting errors and time-to-production. With ShipConstructor, HVAC ducts are full-featured AutoCAD entities.

16 Mar 2004

ASC's Production Manager is Now Available

significant and brand-new software product: Production Manager. Production Manager controls all production-related features and functions within the Autostructure system. It provides sheet and linear (extrusion, flat bar) nesting, part subdivision, weld shrinkage compensation, stock definition, stock inventory and stock remnant management. structural design system.

22 Mar 2004

Autoship: Early Success for New Programs

Autoship Systems Corporation (ASC) said its new Autoload-Rig and Autoload 6.0 programs have enjoyed significant early sales. M/T Seraya Spirit of Teekay Shipping Ltd. industry, including a completely new interface developed from rig operator recommendations. vessels as well – and thus “Autoload 6.0” followed soon after. flexibility. accurate damage simulation). direction – it calculates real shift of free surface in slack tanks according to any change in heel or trim. separate view frame monitors the actual maxVCG curve relative to the current condition (draft/vcg). Real-time sensor data is used for tank contents, drafts, and wind. taken for mooring and riser tension, while different criteria are used for different modes of operation.

06 Apr 2004

CAD/CAM: Stability Software for Semi Submersible Rigs

Not all stability software is made equal. Even if all commonly available stability programs were of the same quality, virtually all of them are designed first and foremost for conventional vessels - and it's no secret that the unique characteristics of offshore platforms demand capabilities not usually required for ships. Rig stability is a very critical issue, and it can also be quite complex. What rig operators need is software that can constantly monitor and predict stability in any combination of circumstances; but what they don't need is an interface as complex as the problem. Enter Autoload Rig. Only recently released, yet already installed on more then 15 platforms, Autoload has also been chosen for the biggest floating rig ever built: Thunderhorse.

06 May 2004

Seaway Marine Selects ASC’s LPS-Bulk

Autoship Systems Corporation (ASC) has sold LPS-Bulk to Seaway Marine Transport of St. Catharines, Ontario, for four vessels: M.V. Canadian Enterprise; M.V. Canadian Transport; M.V. Canadian Transfer; M.V. Canadian Olympic. LPS-Bulk is a state-of-the-art load planning system. The program allows users to simulate loading cargo in any number of configurations, taking into account all relevant cargo properties (including angle of repose and density). 3D modeling of both vessel and cargo ensure the highest accuracy in both stowage plan development and stability and strength analyses. LPS can also take real-time sensor input, and can thus be used to monitor stability after the stowage plan has been finalized.

23 Jun 2004

Labroy Shipbuilding Purchases Autoship System

Autoship Systems Corporation (ASC) has sold CAD/CAM software to Labroy Shipbuilding and Engineering Pte Ltd (Labroy) of Singapore. transformation. First, existing software will be upgraded to present versions, and another seat of each of Autoship Pro and Autostructure will be added. The sale will also augment Labroy's software suite with three seats of Production Manager (ASC's nesting and stock management program). Lastly, to ensure that Labroy's marine engineers will enjoy the very latest in software features, the sale includes a maintenance and support package as well as a 10-day training seminar. Labroy Shipbuilding and Engineering Pte Ltd http://www.labroy.com.sg together with its wholly-owned subsidiary PT Nanindah Mutiara Shipyard…

07 Jul 2004

CAD/CAM

Autoship Systems Corporation (ASC) has developed a complete CAD/CAM suite to meet the CAD/CAM needs in marine vessel design and construction, including two key programs in the CAD/CAM suite: Autostructure 3.0 and Production Manager 3.0. Autostructure and Production Manager are key components in the Autoship CAD/CAM suite, offering shipyards complete solutions in structural design, pre-construction drawing preparation and part nesting. Autostructure is used to create a 3D model of a vessel structure and to output the parts of that model in CAD format. The CAD representation can be used either to prepare construction drawings or for input to NC cutting processors.

10 Sep 2004

Software Solutions

The early 1980s witnessed the birth of the first generation Autohydro by Coastdesign Inc. (now called Autoship Systems Corporation (ASC)). Autohydro was one of a very few PC-based first principles stability and longitudinal strength programs available on the market of the day. Running in DOS, Autohydro quickly became world-renowned as a robust, dependable design and analysis tool for the creation of trim and stability books. Even today, some users of these early versions of Autohydro call ASC asking for advice. Since those early times, ASC has continued to improve Autohydro. The most recent release, Autohydro 6.0, includes many new features that hundreds of naval architects around the world rely on for their hydrostatic and strength calculations.

21 Dec 2004

Herma Selects Autoship Software

Autoship Systems Corporation sold its CAD/CAM software to Herma Shipbuilding, Inc. of Quezon City, Philippines. Herma's installation of Autoship Pro, Autopower, Autohydro Pro, Autoplate and Autostructure and Production Manager is for two dedicated users across a network platform. AutoPlant, a 3D Piping program from ASC partner firm, Bentley Systems, Inc., was also installed with direct integration into Autostructure. Herma Shipyard provides shipbuilding, ship repair and ship conversion services. It is a member of the Herma Group, which provides petroleum, maritime and environmental services.

10 Jan 2005

Company Profile: Autoship Systems Corp.

Autoship Systems Corporation (ASC) of Vancouver, Canada has been a leader in CADCAM vessel design software for nearly 25 years. Originally conceived for the monohull, ASC software is now used for designing all types of marine vessels – from conventional hull forms to oil rigs. In the early 1980s, PCs were beginning to have respectable computing power at a relatively affordable price. This situation encouraged Grahame Shannon of Vancouver, Canada to develop his idea of designing vessels on the PC-platform. Soon Shannon had many naval architects knocking at his door. His design software, called Autoship, had apparently made the vessel designer’s life a lot easier. Before long Shannon had to hire employees and move his business, Coastdesign Inc., out of his basement. Coastdesign Inc.

16 Jan 2001

Autostructure -- For Ease in the Creation of Internal Structures

In June 2000, Autoship Systems Corporation of Vancouver, Canada launched Autostructure, its new internal structural design program. Autostructure is used to create a 3-D model of a vessel structure and to output the parts of that model in CAD format. The CAD representation can be used to either prepare construction drawings or for input to NC cutting processors. Autostructure utilizes an Autoship-generated hull and/or superstructure and can also include the shell plate information created in Autoplate. Every aspect of Autostructure was designed to allow parts to be created quickly and with minimal input. While there is a general workflow, no set ways or sequences are forced upon the user, thus enabling maximum productivity with minimum effort.

12 Jul 1999

CAD/CAM: Producing Better, More Cost Efficient Ships

The advent of software solutions has infiltrated nearly every sector of the maritime market - from propulsion performance monitoring packages to personnel. It arguably has had no greater impact, though, than in the design and construction of new vessels. CAD/CAM/CAE programs are invaluable assets to the designer, builder and operator of vessels of all sizes and dimensions. Not only do advanced programs allow for the creation of the an efficient and cost effective ship structure and outfitting, they provide for enhanced manufacturing practices and techniques, and increasingly help devise a life-cycle maintenance and care plan which can tack profitable years onto a vessel's life.

22 Jul 2005

CAD/CAM: ASC Makes Waves Around the World

Many companies can claim to be global, but Autoship Systems Corporation (ASC) of Vancouver, Canada talks the talk and walks the walk. ASC has been in the business of CAD/CAM software development for nearly 25 years. A core tenant of ASC has been to establish itself as leader in innovation, helping to ensure that as shipbuilding techniques evolved, the industry could rely on its CAD/CAM software to meet new design and construction needs. ASC recently assisted two shipyards to this end: Cantiere Navale Ippolito s.r.l. of Santa Maria di Castellabate, Italy; and Circa Marine and Industrial Ltd of Whangarei, New Zealand. Cantiere Navale Ippolito S.R.L. Cantiere Navale Ippolito s.r.l. is located in the Campania region of Southern Italy.