Marine Link
Wednesday, April 17, 2024
SUBSCRIBE

Canaveral Pilots Association News

25 Aug 2022

Port Canaveral to Add New Patrol and Pilot Boats

Photo of a security rapid response boat, similar to the vessel that will be  custom built for the Canaveral Port Authority (Photo: Life Proof Boats)

Port Canaveral will add a new security patrol vessel and a pilot boat after receiving federal grant funding for several projects to protect against terrorism and other security threats.The U.S. Department of Homeland Security’s (DHS) Federal Emergency Management Agency (FEMA) awarded $472,500 in Port Security Grant Program (PSGP) funding to allow the Canaveral Port Authority (CPA) to purchase a new Security Rapid Response Boat. The vessel will be a 33-ft. “Life Proof” boat operated…

07 Feb 2020

Partners Developing Electric Launch for Canaveral Pilots

(Image: Glosten)

Glosten said it is working with fellow naval architecture firm Ray Hunt Design and the Canaveral Pilots Association on a pilot/demonstration project for the design, construction and operation of an electric pilot boat.Marking a first for a pilot boat in the U.S., the vessel will feature a battery-electric propulsion system with an emergency ‘get home’ diesel engine.During the feasibility-level engineering, the team established that a Ray Hunt hull form outfitted with a Glosten…

12 Jan 2015

Metal Shark Builds Custom Vessel for Canaveral Pilots

Custom Bill Preston-designed 45' aluminum pilot boat built by Metal Shark for the Canaveral Pilots. (Photo: Metal Shark)

Metal Shark has delivered a custom 45-foot aluminum pilot boat to the Canaveral Pilots Association at Port Canaveral, Florida. The vessel was built at Metal Shark’s newly-opened shipyard in Franklin, Louisiana. For the project, the Canaveral Pilots specified a purpose-built pilot boat design by naval architect Bill Preston. The design utilizes the weight of a single bow-mounted diesel engine and a sharp forward entry to slice levelly through waves as opposed to riding over the top of the crests and then plummeting into the troughs.

28 Sep 2004

Port Canaveral Inner Harbor Re-opens; Ship Channel Remains Closed

Small vessels were permitted through the Canaveral Lock and Barge Canal to re-enter Port Canaveral. However, the channel remains closed to ship traffic pending completion of harbor surveys and repositioning of navigational aids. Assessments show several buoys out of alignment and some additional shoaling at the entrance to the channel. Dredge operations are expected to resume Tuesday morning, subject to wind and wave conditions. The project to restore the channel depth nearly was complete before Hurricane Jeanne caused additional shoaling. "These certainly have been trying times for all of us, but as in the aftermath of Frances," says Stan Payne, Chief Executive Officer of the Canaveral Port Authority. "The U.S. Coast Guard, U.S.

23 Sep 1999

Winninghoff Delivers Pilot Boat to Harbor Services

Harbor Services, Inc., a support organization for the Canaveral Pilots Association of Port Canaveral, Fla. has taken delivery of a 40 ft. pilot boat of welded aluminum by Winninghoff Boats, Inc. Designed by Bill Preston of Marine Design, Inc., this boat is an updated version of a pilot boat design that Preston has been perfecting since 1976, incorporating improvements in equipment, systems and construction methods along the way. The most significant changes on this 1998 version are the use of foam fendering, the addition of a second helm station and the creation of NC cutting files for hull and superstructure components.