Design Center News

ClassNK has awarded an approval in principle (AiP) for the design of a prismatic ammonia fuel tank (IMO Type B independent tank) for containerships developed by Planning and Design Center for Greener Ships (GSC).The Type B tank developed by GSC has been designed to ensure safe storage of ammonia and to minimize the reduction in the number of cargo containers due to the placement of fuel tanks in consideration of operational needs.Furthermore, the shape of the storage space for the tank has been simplified from the typical bench corners for container carriers…

The Zero Emission Adriatic Ship (ZEAS) project has commenced, with 13 partners from various European Countries. The overall project grant from EU Horizon is over EUR 13.5 million, where over EUR 2.3 million is reserved to TECO 2030’s deliverable of 1.2MW of fuel cells for full vessel propulsion.The project focuses on a full-scale demonstration of a hydrogen fuel cell-powered system on a ship, tailored for operation in the Adriatic Sea's delicate marine ecosystem. Key activities include the design and construction of the ship…

HGK Shipping ordered from De Gerlien van Tiem shipyard in Druten, Netherlands, a new, low-emission dry goods vessel, a vessel to be specially tailored to the requirements of Salzgitter Flachstahl. Equipped with a diesel-electric drive system and solar panels and designed to be “future-fuel-ready”, the new vessel is outfitted to make a contribution to the sustainability ambitions of HGK Shipping and Salzgitter AG. Once it goes into service, it will replace one of the three vessels from the existing fleet…

Optimized to deal with shallow water levels, a diesel-electric drive system and an extra-wide design for the vessel are the main features of a gas tanker that HGK Shipping ordered from the Dutch shipyard, De Gerlien Van Tiem, on September 15, 2023. The latest addition to the fleet will enable the Duisburg, Germany inland shipping company to maximize cargo carriage even if water levels are low. “GAS 96” has been developed in close cooperation in line with the requirements of two large chemicals companies in the Netherlands and Germany.

Not every vessel in the U.S. Navy is built for major combat operations on the high seas. There are large numbers of boats and service craft that provide essential services to the sea services, the nation and its partners.The U.S. Navy procures about 100 small boats per year. Some of these boats are based on commercial designs, procured to a Navy developed specification that tailors the requirements to the end user needs. They are procured and managed by two Naval Sea Systems Command program offices—PMS 300 and PMS 325.Compared to warships and auxiliaries…

The U.S. Army Corps of Engineers, Buffalo District, on Monday held a christening ceremony for the Derrickboat Kolber. This new derrickboat is 160 feet long, has a beam of 60 feet and a depth of 12 feet. The large crane is a SeaTrax series 60 Model S9302. Its design and construction were contracted by the U.S. Army Corps of Engineers Marine Design Center. The barge was designed by TAI Engineers of New Orleans, and constructed by Metal Trades, Inc., of Hollywood, S.C.The Kolber’s…

The integrity of the marine transportation system as a key plank in a country's economic prosperity is in heightened focus today, with logistics snarls contributing to fast rising inflation. Maintaining the integrity of the vast U.S. inland waterway system - with more than 12,000 miles of inland and intracoastal waterways including 218 lock chambers at 176 sites - is the focus of the Maritime Risk Symposium 2022, a 2.5-day conference scheduled for November 15-17, hostd by Argonne National Laboraty's TCS Conference Center.On Wednesday, November 16, 2022, James P.

The U.S. Army Corps of Engineers, Detroit District in concert with the Philadelphia District and the Marine Design Center awarded a 11.4 million contract to Southwest Shipyard in Houston for a new crane barge on the St. Marys River.“The new crane barge will perform critical lock and hydropower facility maintenance at the Soo Project Office (Soo Locks),” said Justin Proulx, Chief of the St. Marys River Section. “Additionally, the new vessel will support channel maintenance and will be ready to respond to critical maritime incidents on the St Marys River…

Bristol Harbor Group, Inc. (BHGI) won an Indefinite Delivery Contract (IDC) for naval architecture and marine engineering services for the United States Army Corps of Engineers (USACE), Philadelphia District, Marine Design Center. This contract continues BHGI’s partnership with the Marine Design Center (MDC). Some of the projects BHGI has worked on for the USACE include, but are not limited to, retrofits, finite element analyses, electric load analyses, vibration analyses, computational fluid dynamics analyses, as well as barge, towboat and dredge design.In partnership since 2010, BHGI and the MDC team have worked on a wide variety of projects both for the USACE and other federal agencies, including the United States Coast Guard, NASA, and the National Park Service.

Inland waterways, sometimes called ‘nature’s superhighways’ provide a strategic advantage related to security, economics, and trade for any nation whose geography, topography, and climate enable this natural infrastructure. Economic benefits are realized in small rural areas through large urban communities that utilize the system for efficient transportation and improved markets. However, deliberate operational, resource, and policy efforts, along with broad stakeholder integration, are required to maintain and operate such a system.

ClassNK issued an Approval in Principle (AiP) for the design of an ammonia-ready LNG-fueled Panamax bulk carrier developed by Planning and Design Center for Greener Ships (GSC).The AiP Handover Ceremony was conducted at the ClassNK booth at Sea Japan 2022 in Tokyo.Ammonia is expected to be used as ship fuel for decarbonization since it does not emit CO2 when burned. Meanwhile, taking adequate safety measures are impartial due to its characteristics of being toxic to humans and corrosive against materials…

The U.S. Army Corps of Engineers released a contract opportunity on January 25 starting the process to acquire a new Medium Class Hopper Dredge (MCHD) to replace the current dredge McFarland. The new MCHD will be part of the USACE minimum fleet and operate for the Philadelphia District. The January 25 notice is a draft solicitation published to seek industry comments which will inform the Corps’ development of a subsequent “formal solicitation,” likely to be released on or about April 1. In its notice, the Corps emphasizes that the draft is not an invitation for bid.

Classification society ClassNK announced it has issued an approval in principle (AIP) for the design of an ammonia-fueled Panamax bulk carrier developed by Planning and Design Center for Greener Ships (GSC).Ammonia is expected to be used as decarbonized fuel for ships since it does not emit CO2 when burned, however, taking adequate safety measures are impartial due to its characteristics of being toxic to humans and corrosive against materials. While international standards for using ammonia as ship fuel are yet to be developed…

A new utility/passenger vessel has been delivered and will soon go to work for the U.S. National Park Service (NPS) to serve Ellis Island and the Statue of Liberty.The all-steel newbuild, designed by New Orleans-based TAI Engineers, LLC, has been named Annie Moore after the first immigrant, a 15-year-old Irish girl, who signed the Ellis Island register."TAI has designed and built many boats and ships, but this project is particularly special to me," said Anil Raj, President of TAI. "My very first arrival to the United States was via New York in 1969.

The U.S. Army Corps of Engineers' Rock Island District held a christening ceremony in Quincy, Ill., on Friday for the latest towing vessel to joins its fleet.The vessel, which has been renamed Quincy, was built in 2008 by Texas shipyard Orange Shipbuilding for $5 million and is being relocated from the Corps' Louisville District.Originally named the Gordon M. Stevens, the vessel was designed and contracted by the USACE's Marine Design Center and served as part of the construction…

Maersk's towage arm Svitzer announced it has opened a new Americas regional headquarters in Panama City.Svitzer said it decided early last year to relocate its Americas headquarters from Miami, U.S. to Panama and move into the Panama Design Center, which also houses other entities of the Maersk Group including Sealand Americas, APM Terminals, Hamburg-Sud, Twill, and Maersk Liner Operations Clusters.Arjen van Dijk, managing director of Svitzer Americas, said, “Panama is an important, strategic maritime hub with good infrastructure and easy connections to nearby countries and ports.

Mitsubishi Shipbuilding Participating in "Planning and Design Center for Greener Ships" focussed on R&D toward Achieving Decarbonized Shipping, and on December 10, 2020, a presentation was held in Yokohama to announce the establishment of the Center.Mitsubishi Shipbuilding Co., Ltd. has become a member of "Planning and Design Center for Greener Ships," a core organization established to plan and propose state-of-the-art ships on a continuing basis through integration of the accumulated expertise of Japan's shipbuilding industry.

Marine electrical systems provider Vard Electro Canada’s said it is setting up new operations in Houston to serve the North American maritime industry. Vard Electro US Inc. will offer the same marine electrical engineering, procurement solutions, and vessel system integration as Vard Electro, a subsidiary in the Vard Group majority-owned by shipbuilding giant Fincantieri.Andrea Qualizza, general manager for Vard Electro, said, “Vard Electro has over decades served shipyards and shipowners all over the world.

Bristol Harbor Group, Inc. (BHGI) was recently awarded an Indefinite Delivery Contract (IDC) for naval architecture and marine engineering services for the U.S. Army Corps of Engineers (USACE), Philadelphia District, Marine Design Center. This contract continues BHGI’s partnership with the Marine Design Center (MDC). Some of the projects BHGI has worked on for the USACE include, but are not limited to, retrofits, finite element analyses, electric load analyses, vibration analyses and computational fluid dynamics analyses as well as barge, towboat and dredge design.In partnership with MDC since 2010, BHGI and the MDC team worked on a wide variety of projects both for the USACE and other federal agencies, including the U.S. Coast Guard and NASA.

DSC Dredge, LLC wins bid for a new, non-propelled, cutter suction head dredge solicited by The Marine Design Center (MDC) of the U.S. Army Corps of Engineers (USACE) earlier this month. When completed, the new cutter suction head dredge will operate out of Astara, Azerbaijan to not only maintain the harbor depth and harbor entrance but the US Government is purchasing this dredge for the country of Azerbaijan as a part of Azerbaijan’s support of the US in anti-terrorism efforts.

China has built its first research and development test base for autonomous ships in the southern coastal city of Zhuhai next to Macao, state-owned newspaper Economic Daily reported.The test base named Xiangshan Marine Scientific & Technological Port is located in Zhuhai, Guangdong province. It will create an innovation platform for the design, research and testing of unmanned marine systems and intelligent equipment.The base will help develop the industrial chain of unmanned ships and foster research on advanced equipment manufacturing as well as new generation of information technology.Backed by local unicorn Zhuhai Yun Zhou Intelligent Technology…

Millions of dollars of goods are transported up and down the Mississippi every year. This transportation is made possible, in part, by the U.S. Army Corps of Engineers (USACE) Mat Sinking Unit and its crew, who work tirelessly each season to protect the riverbanks with concrete mats and prevent erosion.The Mat Sinking Unit was built in 1940, widened in 1960 and is being replaced over the next several years with new and improved plant. The new design will double the number of mat squares that can be placed in a season.USACE Vicksburg District (MVK)…

The U.S. Army Corps of Engineers (USACE), Marine Design Center (MDC) will soon be releasing a sources sought notice for the construction of the Mat Boat, a 188 x 74 x 10-ftl. deck barge, for the Mat Sinking Unit (MSU) located on the Mississippi River. The barge is to be built to American Bureau of Shipping (ABS) Rules for Service on Rivers and Intracoastal Waterways. The sources sought notice is only for the construction of the barge, shown in Figure B, and not for the final product which incorporates a government furnished robotics package shown in Figure A.