Fuel Conditioning Module News

Alfa Laval said it has won an order for three units of the Alfa Laval FCM LPG, the low-flashpoint fuel supply system (LFSS) developed in partnership with MAN Energy Solutions.The LFSS order was signed in December 2020 with IMEX Co., Ltd., which builds MAN Energy Solutions licensed engines in Japan as a subsidiary company of Hitachi Zosen Corporation. The order comprises three Alfa Laval FCM LPG systems that will be installed on three Japanese LPG carriers.According to Alfa Laval…

Alfa Laval says its 2800 m2 testing space – already equipped for today’s oil and gas fuels – has been readied for testing with biofuels. In coming years,  as the marine industry races to slash greenhouse gas emissions, the center will accumulate knowledge to aid maritime decarbonization.Located in Aalborg, Denmark, the Alfa Laval Test & Training Centre is a core component of Alfa Laval’s own research and development. It is also a site for collaboration with industry partners and research institutes…

In partnership with MAN Energy Solutions, the Alfa Laval Fuel Conditioning Module (FCM) LPG has undergone successful tests with the first two-stroke, high-pressure marine engine to use LPG as fuel – and has been evaluated for use with ammonia."As the marine industry embraces a growing range of alternative fuels, including LPG and ammonia, Alfa Laval is committed to providing the advanced fuel systems needed for engine protection and efficiency," said a press release.The competitiveness of LPG as a fuel is increasing. Not only does LPG virtually eliminate sulphur emissions, it has a lower cost than many other fuels and is easily available worldwide.

Though fuel-saving practices like slow steaming are widespread, energy efficiency continues to be a pressing concern. Vessel fuel bills remain high – and will likely become even higher for those sailing in Emission Control Areas after January 2015. Catastrophic engine damage due to cat fines is also on the rise, along with safety worries related to multi-fuel operation. Yet in the face of these complex and interrelated issues, the Alfa Laval adaptive fuel line offers new levels of savings and protection. Fuel costs, emission legislation and cat fine difficulties are all deeply intertwined.

When Gustaf de Laval read in 1877 an article in the German periodical ”Milchzeitung” (Milk News Paper) about centrifugal separators, he certainly did not expect that it would lead to his founding of a global acting company with around 16,400 employees nearly 140 years later. His first continuous separator, with a capacity of 130 liters per hour, was demonstrated 1879 in Stockholm; and four years later, in 1883, he and his partner, Oscar Lamm, established the company AB Separator.

After months of preparation, the doors of the Alfa Laval Test & Training Center in Aalborg, Denmark are open. Located on the site of the former Aalborg shipyard, this massive ship simulation facility – the largest and most advanced in the marine industry – now adds considerable muscle to Alfa Laval’s research and development efforts. The Alfa Laval Test & Training Center comprises a 250 m2 testing area, built around a 2 MW marine engine and comprising commercial and prototype equipment from all of Alfa Laval’s marine product groups.

Marine R&D enters a bold new era as operations begin at the Alfa Laval Test & Training Center. After months of intense preparation, the doors of the Alfa Laval Test & Training Center in Aalborg, Denmark are open. Located on the site of the former Aalborg shipyard, this massive ship simulation facility – the largest and most advanced in the marine industry – now adds considerable muscle to Alfa Laval’s research and development efforts. The Alfa Laval Test & Training Center comprises a 250 m2 testing area…

Just two months remain until the inauguration of the Alfa Laval Test & Training Center on January 15, 2014. Originally conceived for the development of PureSOX and other emission control technologies, it has grown to incorporate far more than just exhaust systems. Now that the majority of the equipment is in place, it is possible to take a deeper look into the details of this remarkable new facility. Located on the site of the former Aalborg Shipyard in Aalborg, Denmark, the new Alfa Laval Test & Training Center is an imposing structure.

Novenco and Alfa Laval have joined forces to provide a professional and complete cooling solution: Alfa Laval Advanced Cooling System (ACS). The system will allow ships to safely operate with any quality of Low Sulphur Fuel Oil (LSFO). Collaboration started in March 2010 and the two companies signed an official partner agreement on November 23rd the same year. ACS is specially designed for easy installation in restricted space areas. Novenco’s QCM chiller unit delivers chilled water to the Alfa Laval Fuel Conditioning Module (FCM) at a very stable temperature…