NTSB Releases Preliminary Report on Offshore Platform Helicopter Crash
The U.S. National Transportation Safety Board has released a preliminary report on the December 29, 2022, fatal helicopter crash near a Gulf of Mexico oil platform. One pilot and three passengers died in the incident."On December 29, 2022, about 0834 central standard time, a Bell 407 helicopter, N595RL, was substantially damaged during takeoff from an offshore platform in the Gulf of Mexico. The pilot and 3 passengers were fatally injured. The helicopter was operated as a Title 14 Code of Federal Regulations Part 135 flight…
Crew Supply Vessel Delivered in Louisiana
Lady Tierney, a 205-foot monohull DP-2 crew supply vessel, has been delivered for Sea Supply, Inc., a B&J Martin Inc. subsidiary, of Galliano, Louisiana. With design expertise from Incat Crowther’s Lafayette, La. office, combined with concept design and standards from the Morgan City, La. based Halimar Shipyard and the vessel owner, the ABS-classed, USCG-certified vessel will work in the Gulf of Mexico’s deep water offshore industry. For transportation of supplies, Lady Tierney features an aft cargo deck comprising of 3,950 square feet of timber covered area with a capacity of 450 LT.
Lockport Builds Triple Screw Model Bow Tug
Dickie Adams’ at Lockport Fabrication has a triple screw model bow tug building for Russell Plaisance of Galliano Louisiana. Powered by three six-cylinder Cummins KTA19 engines the boat is being built to a Frank Basile (Entech and Associates Inc.) design. While a triple engine and triple screw configuration is a common method of maintaining a shallow draft, this boat is interesting in that only the middle propeller is fitted with a kort nozzles while the two outside props will be open. Basle explains that he has had vessels built to this design with two Cummins KTA38s for main engines but since this owner will be using the boat to service near shore oil platforms in the Gulf of Mexico the triple engine installation will deliver a similar bollard pull with a shallower draft. The 84 x 27-ft.
Triple-Engine Tug From Rodriguez
In mid-January Rodriguez Boat Builders Inc. of Bayou LaBatre Alabama installed three Cummins KTA38 M0 diesels in the finished hull of a new 90 by 32-foot tug for Hughie L. Cheramie, Inc. of Galliano Louisiana. With the engines installed in the new hull the already completed steel work for the deckhouse was lifted into place and the tug showed its final shape. Finishing would take another three months with delivery to the owners scheduled for April. Except for the engines and the owner supplied double-drum towing winch the boat is a virtual sister ship to the Gloria G. Cherami built at Rodriguez a few years ago. Electrical service will be supplied by two Cummins 4BTA 60 kw generator sets. The boat will be ABS load line inspected.
