Mechanical Pipe Joining Systems News

Mechanical pipe-joining systems manufacturer Victaulic announced Rick Bucher has been appointed to the position of President and COO, effective immediately. Bucher will continue reporting to John F. Malloy who has served as Chairman, President & CEO for the past 16 years. Malloy will remain Chairman and CEO.Bucher began his career with Victaulic in 2009 as Vice President, Product Development, and rose to the position of Executive Vice President, Technology & Product Development. In June 2019, he was named COO.

Anything but new, the Victaulic method of pipe-joining has been around for a long time. Armed with myriad type approvals from most IACS groups, Victaulic’s output will no doubt (and soon) form a part of your marine equipment for a long time to come. The conservative and staid domestic waterfront, especially where it intersects boatbuilding and repair, recently set sail for increased efficiencies, driven in part by emerging technologies, but also through improved management and new assembly techniques. It was in 2013 that Boysie Bollinger’s son, Chris Bollinger, then a member of the Bollinger senior management team, proclaimed, “Boatbuilding is evolving into something that will more closely resemble manufacturing…

Anything but new, the Victaulic method of pipe-joining has been around for a long time. Armed with myriad type approvals from most IACS groups, Victaulic’s output will no doubt (and soon) form a part of your marine equipment for a long time to come. The conservative and staid domestic waterfront, especially where it intersects boatbuilding and repair, recently set sail for increased efficiencies, driven in part by emerging technologies, but also through improved management and new assembly techniques. It was in 2013 that Boysie Bollinger’s son, Chris Bollinger, then a member of the Bollinger senior management team, proclaimed, “Boatbuilding is evolving into something that will more closely resemble manufacturing…

Victaulic, a manufacturer of mechanical pipe-joining systems, has received type approvals from American Bureau of Shipping (ABS), Bureau Veritas (BV), Det Norske Veritas (DNV), Korean Register and Lloyd’s Register for Vic-Press, a flame-free press system for joining small-diameter stainless steel pipe. With these new approvals, more shipbuilders will be able to take advantage of Vic-Press as a means of joining stainless steel pipe in new-vessel construction, retrofit and repair operations. The system is approved for use in class III piping systems for marine and offshore applications.

Unconventionally lowering costs, safely and improving the bottom line. That’s the Victaulic way. In the towing segment of the marine industry, sometimes it does seem that boats are under perpetual repair. A tugboat that’s tied up in maintenance and not able to work is a lost revenue opportunity. As a result, limiting time out of service by performing repair and retrofit services dockside is of critical importance. For example, McAllister Towing & Transportation was able to accomplish repairs not just quickly, but at a lower cost and in a safer manner than conventional methods.

Victaulic, a manufacturer of mechanical pipe joining systems, introduces Vic-Press, an IACS-approved flame-free press system for joining small-diameter stainless steel pipe. With Type Approval certification from IACS member agency Germanischer Lloyd, Vic-Press offers a quick, simple, safe and reliable means of joining off-the-shelf Type 316 ASTM A-312 Schedule 10S stainless steel pipe in new-vessel construction, retrofit and repair operations. The system is type approved for class III piping systems.

Victaulic, a manufacturer of mechanical pipe-joining systems, has received Type Approvals from DNV (Det Norske Veritas) for its Vic-300 MasterSeal butterfly valves - Series 761 and Vic-Check check valves - Series 716 and 716H. The approval certificates are valid until the end of June 2017 and cover Class III piping systems for fresh water cooling, condensate return, non-essential systems, sanitary drains and nonessential service air. Vic-300 MasterSeal butterfly valves have DNV…

Victaulic, a manufacturer of mechanical pipe-joining systems, is exhibiting its line of IACS-approved products that they say reduce the need for vessel maintenance and help make maintenance quicker, simpler and safer at Marine Maintenance World Expo 2013. On show at stand no. 1020 will be a selection of rigid and flexible couplings, fittings and accessories that reduce the time and space needed for piping system installation, and allow easier access for repair and maintenance.

Victaulic, a manufacturer of mechanical pipe joining systems, introduces Vic-Press, an IACS-approved flame-free press system for joining small-diameter stainless steel pipe. With Type Approval certification from IACS member agency Germanischer Lloyd, Vic-Press offers a quick, simple, safe and reliable means of joining off-the-shelf Type 316 ASTM A-312 Schedule 10S stainless steel pipe in new-vessel construction, retrofit and repair operations. The system is type approved for class III piping systems.

Couplings and fittings that help shipbuilders save time, cut costs and improve safety retain ABS seal of approval. Victaulic, a manufacturer of mechanical pipe-joining systems, has received updated and renewed ABS (American Bureau of Shipping) Type Approvals for a range of grooved-end couplings and fittings. The newly issued approval certificates are valid until end June 2017. They cover products that are reliable, safe and faster to install than other joining methods, and that are ideally suited to many applications in the shipbuilding and marine piping industries.