Marine Link
Thursday, March 28, 2024
SUBSCRIBE

Niclas Dahl News

29 Aug 2023

Wind Power: AIP for Oceanbird Wing 560

Image courtesy Oceanbird

The first wing sail from Oceanbird, Wing 560, has received Approval in Principle (AiP) from DNV.“It is one of the first stiff wing sails that will tilt in hard winds as a safety feature, that gets an Approval in Principle," said Niclas Dahl, Managing Director, Oceanbird. "Therefore, it is reassuring that DNV supports our safety philosophy since we are now going from vision into realization. In just a few months, we will begin to assemble our first full-scale wing prototypes, which…

25 Apr 2017

White Paper Addresses Bilge Water Noncompliance

Photo: Alfa Laval

A new white paper from Alfa Laval addresses ship owner concerns to ensure vessel compliance with bilge water regulations worldwide. Even if a traditional system with type approval is operating on board, the paper states, there are still risks of violating applicable laws and damaging the marine environment. Alfa Laval – a  leader in heat transfer, centrifugal separation and fluid handling – has announced the availability of a new white paper, Bilge water compliance issues. The…

08 Apr 2015

Alfa Laval Expands LNG Solutions Portfolio

Photo: Alfa Laval

Alfa Laval has entered into a patent license agreement with Daewoo Shipbuilding & Marine Engineering (DSME) for the use of DSME’s patents on high pressure fuel gas supply systems. The agreement signed in March 2015 enables Alfa Laval to further develop the Alfa Laval Fuel Conditioning Modules for use with high pressure gas injection engine technology from MAN Diesel & Turbo. The agreement will see Alfa Laval use DSME patents with Alfa Laval Fuel Conditioning Modules for use on natural gas-powered ships, such as LNG carriers.

10 Jul 2014

Alfa Laval's Adaptive Fuel Line

Alfa Laval Adaptive Fuel Line

Though fuel-saving practices like slow steaming are widespread, energy efficiency continues to be a pressing concern. Vessel fuel bills remain high – and will likely become even higher for those sailing in Emission Control Areas after January 2015. Catastrophic engine damage due to cat fines is also on the rise, along with safety worries related to multi-fuel operation. Yet in the face of these complex and interrelated issues, the Alfa Laval adaptive fuel line offers new levels of savings and protection. Fuel costs, emission legislation and cat fine difficulties are all deeply intertwined.

25 Feb 2014

Alfa Laval: Green & Efficient Shipping

“The Alfa Laval Test & Training Center is the ultimate proof of our commitment to R&D and meeting the challenges faced by the marine industry. It’s inauguration was a celebration of that commitment and the starting shot for a new era.”  Peter Leifland, Alfa Laval’s Marine & Diesel President

When Gustaf de Laval read in 1877 an article in the German periodical ”Milchzeitung” (Milk News Paper) about centrifugal separators, he certainly did not expect that it would lead to his founding of a global acting company with around 16,400 employees nearly 140 years later. His first continuous separator, with a capacity of 130 liters per hour, was demonstrated 1879 in Stockholm; and four years later, in 1883, he and his partner, Oscar Lamm, established the company AB Separator.

16 Jan 2014

Alfa Laval Opens Test & Training Center

Photo: Alfa Laval

After months of preparation, the doors of the Alfa Laval Test & Training Center in Aalborg, Denmark are open. Located on the site of the former Aalborg shipyard, this massive ship simulation facility – the largest and most advanced in the marine industry – now adds considerable muscle to Alfa Laval’s research and development efforts. The Alfa Laval Test & Training Center comprises a 250 m2 testing area, built around a 2 MW marine engine and comprising commercial and prototype equipment from all of Alfa Laval’s marine product groups.

16 Jan 2014

Alfa Laval Opens Test & Training Center

Marine R&D enters a bold new era as operations begin at the Alfa Laval Test & Training Center. After months of intense preparation, the doors of the Alfa Laval Test & Training Center in Aalborg, Denmark are open. Located on the site of the former Aalborg shipyard, this massive ship simulation facility – the largest and most advanced in the marine industry – now adds considerable muscle to Alfa Laval’s research and development efforts. The Alfa Laval Test & Training Center comprises a 250 m2 testing area…

06 Jun 2013

Alfa Laval Briefing on Energy Saving

Image courtesy of Alfa Laval

As ship owners and operators continue to be pinched by high fuel prices, Alfa Laval says it is raising the bar when it comes to solutions. Drawing on the industry’s broadest portfolio of equipment and knowledge, Alfa Laval is taking a comprehensive approach that promises sweeping advances in energy efficiency. Today’s marine industry is placing greater emphasis on energy than ever before. This comes as no surprise, since virtually all energy at sea comes from the burning of fuel.

17 Mar 2008

Green Ships: Politicians Ready if Industry Not

More than 190 participants at the 5th annual Green Ship Technology conference in Rotterdam on March 11-12 explored the latest tide of ‘stick and carrot’ options for making shipping environmentally sustainable. Eco-friendly solutions aired at the forum ranged from legislative compulsion to commercially beneficial inducements. On the one hand, there were stark warnings that politicians are preparing to impose mandatory emissions rules if there is no firm outcome to meetings of the International Maritime Organization marine environment protection committee (MEPC) scheduled between now and mid-2009. But delegates also heard how a voluntary…