Tg100 News

Thordon Bearings’ authorized distributor in Mexico, TZ Industrias, has secured an order to supply the Canadian company’s TG100 shaft seals, equipped with a safe return to port (SRTP) emergency seal, to a quartet of shrimpers operated by Pesquera Axel, one of the country’s leading fishing vessel operators.TZ Industrias will deliver four 127mm (5in) diameter mechanical seals to the Mazatlán-based repair yard Constructora y Reparadora de Buques for installation this June to the 7m (23ft) long fishing vessels Kukulkan…

Thordon Bearings Reports it has secured a contract to supply a range of water-lubricated and grease-free bearings for installation to several fleet boats under construction at the FMT Shipyard & Repair facility, for workboat owner Maritime Partners.Twelve twin-screw push boats are scheduled to be delivered from the Louisiana shipyard with equipment that includes RiverTough tailshaft bearings, ThorPlas-Blue rudder bearings with Pucker Seals, ThorPlas-Blue steering linkage bushings…

Thordon Bearings has debuted a new propeller shaft seal for the commercial shipping industry featuring a unique Safe Return to Port (SRTP) design.Completing the COMPAC open seawater lubricated propeller shaft bearing system, Thordon's new BlueWater Seal is described by the manufacturer as a cost effective, commercial grade axial lip seal specifically designed for merchant shipping fleets. It incorporates Thordon’s emergency SRTP capability, first used in the company’s TG100 and…

Canadian manufacturer Thordon Bearings confirmed it has secured contracts to supply 24 TG100 propeller shaft seals to Drydocks World-Dubai and Abu Dhabi Shipbuilding and Repair yards for installation to six UAE Navy vessels. Each quad screw ship will operate a quartet of TG100 shaft seals.Rafid Qureshi, managing director of Dubai-based Ocean Power International (OPI), Thordon’s authorized distributor in the region, explained the award win was “a direct result of the yards’ recommendations”…

One of South America’s leading push boat operators is on its way to completing a fleet-wide retrofit to Thordon’s water lubricated tailshaft and rudder bearings.In 2014, Argentinian owner Atria Logistics UABL, which operates a fleet of workboats on the Paraná River, installed Thordon’s RiverTough tailshaft bearings to its first push boat, the 135-foot-long Concepcion. In 2020, six more vessels in the company’s 26-strong fleet were converted.Egnard Bernal, Thordon Bearing’s Business Development Manager…

A  1,600-horsepower towboat delivered to Harvey, La.-based operator L&L Marine Transportation in June is now operational with a full range of Thordon oil-free and grease-free bearings.Designed by Entech, the 65-foot twin-screw towboat Amelia Ray is purpose-built by Rodriquez Shipbuilding in Coden, Ala. for the transportation of petrochemicals along all inland and coastal waters in the southern states of the U.S.In addition to newest towboat addition, L&L Marine operates the 2,000-horsepower Melissa Lee and three 1,200-horsepower vessels Angela Rae, Myrna Ann and Madeleine Michelle.

Canadian company Thordon Bearings has notched up another success story for a customer in the demanding offshore sector, with a bearing and seal installation in “perfect condition” after over three years of operation.Global Tiger, operated by UAE-based Global Marine Co is a 42m (138ft) crew/supply vessel currently in service in the Middle East. It is one of a pair of all-aluminium crewboats built by Grandweld of Dubai in 2015/2016. The vessel, with 83-person capacity, is powered by a triple-screw Caterpillar propulsion plant…

A perennial fixture in our prestigious MN100 edition - MarineNews' annual look at the best 100 individuals and firms in the shallow draft, brown water and workboat sectors - Thordon Bearings has been on the leading edge of environmental improvements for the marine industry for many years. The Case:Thordon has invested heavily in the inland waterway market,  keeping two warehouses well stocked with tailshaft bearings, seals and rudder bearings to ensure quick delivery. The TG100…

Thordon Bearings’ founder and polymer materials pioneer George A. (Sandy) Thomson has been awarded the global transportation sector’s most distinguished accolade, the Elmer A. Sperry Award 2019 for “Advancing the Art of Transportation”.Thomson joins a long list of Sperry Award recipients, which was established in 1955, including Donald Douglas, Ferdinand Porsche, Sir Geoffrey De Havilland, Christopher Cockerell, Leonard Hobbs, Perry Pratt, Josef Becker and Malcom McLean.“I am deeply honored and humbled to win this award…

Thordon Bearings has updated its TG100 seal installation requirements to facilitate cost-effective installation at all shipyards with the release of new instructional videos. Shipyard staff can quickly and easily install the state-of-the-art seal themselves, reducing the overall costs of TG100 procurement.In addition to instructions detailed in its TG100 Installation & Operation Manual, Thordon has produced a three-minute YouTube video outlining the steps shipyards need to take to achieve the perfect TG100 install. Additionally, a video has also been produced to guide shipyards through the ten-step process to prepare the TG100 seal for shaft withdrawal.To ensure that installation remains under warranty…

The ideal solution for the tightening regulatory noose also brings a different (and welcome) shade of ‘green’ for workboat operators.As the US Environmental Protection Agency (EPA ramps up enforcement of regulations that mandate that all vessels over 24 meters (78 feet) operating in US waters must switch over to EALs in all oil-to-sea interfaces before their next drydocking, it is an arguably good time to be in the lubricants business. At the same time, Thordon Bearings, a manufacturer of seawater lubricated bearings for the marine industry has its own thoughts on that very topic. Specifically, Craig Carter, Thordon Bearings’ Director of Marketing and Customer Service, asks, “What is the point in shipowners investing in costly bio-lubricants when seawater is widely available and 100% free?

Thordon Bearings, of Burlington, Ont., has received an order to supply four comprehensive shipsets of stern gear for a new class of towboat.The four boats are being built by U.S. shipyard Master Marine of Bayou La Batre, Ala., for Waterfront Services, based in of Cairo, Ill.. The new vessels have been designed to meet the requirements of Subchapter M, a set of federal rules recently introduced by the U.S. Coast Guard, relating to the inspection requirement for towboats, including seaworthiness standards and safety protocols.The 67ft x 28ft boats…

Offshore Towing Inc (OTI) has completed the refurbishment of its 1974-built 9000hp-class tug Zion Falgout at the Conrad Deepwater shipyard, in Morgan City, La. The milestone project involved the retrofitting of TG100 seals in what marks OTI’s first mechanical shaft seal installation and the largest diameter TG100 series seals ever supplied by Thordon Bearings. An 11.75in (298mm) diameter seal was installed to each propeller shaft of the 66.88t bollard pull twin-screw workhorse.

The first four of 15 Impala Terminals Colombia-operated tug/tow boats have been converted from oil to water-lubricated tailshaft bearings. Impala Zambrano, the first of 15 triple-screw and twin-screw push boats scheduled for oil-to-water conversion, was retrofitted in July 2015 with a Thordon RiverTough bearing and TG100 shaft seal combination. Three triple-screw and one twin-screw pusher vessels have since been converted and Thordon’s Colombian distributor Delta Marine and River Services will now work on the next vessels in the series.

Thordon Bearings’ US West Coast Distributor, Pacific Marine Equipment has successfully completed the installation of a pair of TG100 mechanical propeller shaft seals to Hornblower Cruises & Events’ 1000-passenger capacity twin screw flagship, Inspiration Hornblower. Hornblower, one of the leading river cruise operators in the U.S., operates a fleet of 70 sightseeing and dinner cruise vessels in several cities across the Golden State, the United States and Canada. Todd Terry, President, Pacific Marine Equipment, Thordon Bearings’ U.S.

Thordon Bearings Inc., a company in grease and oil-free bearing solutions announced the introduction of TG100, a new water lubricated mechanical face seal for 100-305 mm (4-12”) shaft diameters specifically designed for operation in abrasive waters, but can operate in clean water as well. The TG100 uses Silicon Carbide seal faces designed to last the life of the vessel and operate in both clean and abrasive-laden waters. If the face seals should ever experience damage, a feature…