By David Tinsley, Technical Editor
While catamaran and multi-hull vessel technology
is increasingly being explored for its potential in high-speed military and logistical support applications
, Rolls-Royce has unveiled a proposal for a fast naval sealift ship based on a monohull RoPax ferry design.
The impulse for developing a vessel type with that rare combination of exceptional speed and relatively high payload capacity originates from the changing emphasis in military support requirements, not least the deployment of rapid response forces to distant areas at short notice. The project has also been driven by a general trend towards faster combatants and the complementary need for a faster speed of back-up and replenishment.
The Rolls-Royce proposal entails a 4,000-dwt vessel of 581 ft. (177 m), capable of achieving a range of 3,600 n.m., transporting 2,500-tons of cargo at 36-knots. Short-haul operations, with a much decreased fuel volume, would allow shipment sizes up to 3,700-tons, in the case of sustaining a speed of 40 knots over 500 n.m. The comparatively high cargo capacity is not restricted by volumetric capacity, since the design encapsulates 1,800 lane-m for military vehicles and equipment.
The fast sealift vessel concept underscores Rolls-Royce's endeavors to transfer technology across its commercial and naval businesses. It offers a pragmatic solution
to emerging military needs, with the cost and time benefits of using a commercial, off-the-shelf (COTS) design of fast ferry.
It is based on the P2500 RoPax series, formulated in the late 1990s by Nordvestconsult, one of two west Norwegian commercial ship design houses owned by the UK group. Although not built to date, the P2500 was originally developed in response to a Mediterranean ferry
operator's project requirements, and the design was tank-tested and taken through the classification process. The parameters had included a speed of 42-knots, and dimensioning for 1,500-passengers plus 38 full-length trucks and 245 cars.
As well as offering commercially acceptable operating costs at a service speed of 42-knots, the monohull form had been devised to produce favorable resistance characteristics at significantly higher speeds, to as much as 60-knots. The new, fast sealift ship design is also scaleable to meet individual customers' needs.
In the context of currently available, fast commercial designs, Rolls-Royce acknowledges
that aluminum catamarans have already exhibited benefits with respect to the shortsea transportation
of troops and equipment, and in littoral support. The capability to transport military personnel is a factor in their operational success. Such vessels are also inherently flexible and can even provide the opportunity to deploy forces directly on to a beachhead. "The catamaran vessels currently in naval use are, however, physically limited in size (around 120 m) and cargo capacity (just over 500 tons)," observes Rolls-Royce, adding that "Their size also limits achievable range and effective operation in high-sea conditions."
By contrast, the emphasis in the fast sealift proposal has been on maximizing deadweight at the requisite speed and endurance, while allowing navies to gain advantages in reduced production times, structural weight and build and operating costs by recourse to monohull technology bred
in the commercial marine environment.
Through the Nordvestconsult P2500 project and also the group's joint work with Spanish shipyard and engineering organization IZAR
on an innovative design of 37-knot shortsea freight carrier, Rolls-Royce has studied the relative merits of monohull, catamaran and surface effect ship (SES) forms for high-speed transport needs. Factors which were deemed advantageous in those projects, including deadweight to speed relationship, build techniques and cost, propulsive power requirements, cargo carrying layout, and seakeeping performance, held good in the selection of a monohull for the fast sealift concept.
The main structure would be in high tensile steel, with only the fourth and bridge decks to be fabricated from aluminum alloy. The monohull design is also considered to provide higher levels of damage stability, as flooding would occur symmetrically. By combining a wave-piercing bulbous bow with a monohull form, a longer waterline has been achieved with a very low angle of water entrance at the bow. This offers reduced resistance and minimized slamming, while producing better motions.
The nominated power plant comprises three of Rolls-Royce's newly-developed MT30 marine gas turbine, conferring a power concentration of 108-MW from less than 70 tons of installed prime movers. Propulsive effect would be delivered via Allen gearboxes through Kamewa waterjets. The MT30 is also central to the European High Speed Cargo Vessel(EHSCV) design developed by Rolls-Royce and IZAR.