SNAME Announces Pre-Meeting Training Courses

MarineLink.com
Friday, August 16, 2013

The Society of Naval Architects and Engineers (SNAME) has scheduled six pre-meeting training courses to run in the days immediately prior to the SNAME 2013 Annual Meeting and Expo, November 6-8 at the Hyatt Regency Bellevue in Bellevue, Washington. Early registration discounts of up to $200 are available until October 14.

This opportunity is offered to companies who regularly provide training courses to Naval Architects, Marine and Ocean Engineers.

HydroComp NavCad "Best Practices" Training Course

Instructor: Don MacPherson
Date: Tuesday, November 5, 2013
Time: 8:00am - 5:00pm

Don't miss this one-day training course for active users of NavCad, HydroComp’s software for ship resistance and propulsion. The focus of the course will be to introduce and review "best practices" for experienced and novice users of NavCad.

For more information, contact HydroComp, Inc.
1+ 603-868-3344
info@hydrocomp.com
www.hydrocompinc.com/navcadbestpractices

DNV - An introduction to LNG for Naval Architects and Marine Engineers Course
Instructors: Peter Noble (Noble Associates LLC), Tony Teo (DNV) and Timothy E. Meyers (USCG)
Date: Tuesday, November 5, 2013
Time: 8:30am - 5:00pm
Fees: $295 each, refreshments and lunch will be included

Although Liquefied Natural Gas (LNG) has been transported by sea for over 50 years, there has been a rapid expansion in that trade in recent times and new initiatives such as LNG fueled ships and Floating LNG Production, Storage and Off-take Systems are raising interest among naval architects, marine and ocean engineers. This short course is designed to give experienced and young professionals an introduction to key elements in the design, engineering, construction and operation of LNG ships and offshore systems.

For more information, contact Cynthia Ervin
Cynthia.Ervin@dnv.com
1+281-396-1720
To register, visit www.dnvusa.com/services/training/TrainingInNA/IntroLNGforNavalArchitects2013.asp

Numeca International – FINE™/Marine “CFD for Naval Architects” Workshop

Date: Tuesday, November 5, 2013
Time: 8:00am - 5:00pm

This one-day workshop will provide an introduction to FINE/Marine, the only CFD tool dedicated solely to marine hydrodynamic applications. Attendees will be able to see for themselves, how FINE/Marine, guides the user through the CFD solution process, from start to finish. All the components are wrapped up in a naval architecture-oriented interface from CAD, to meshing, solving and automated results viewing.

For more information, contact: Rebecca Watrous
rebecca.watrous@numeca.com
1+415-558-8483

ABS - "An Introduction to Arctic Engineering"

Date: Tuesday, November 5, 2013
Time: 8:00am - 5:00pm
Fee: $295 per person, refreshments and lunch will be included

The exploration for resources and marine transportation in the Arctic region are becoming increasingly viable and correspondingly the interest in research and commercial exploitation has been steadily rising. This requires vessels, offshore structures and their equipment to be designed to operate in ice covered waters in high latitude, low temperature environments. This introductory course will provide participants with a view of up-to-date Arctic marine and offshore activities, regulatory issues in the Arctic, Arctic environments and ship-ice interaction, performance of ice capable ships, ice strengthening design standards, design and operational considerations for low temperature environments, design-assessment procedures for direct calculation and offshore structures in the Arctic.

For more information, contact James Bond
jbond@eagle.org
To view the schedule, click here (PDF)

Creative Systems - General GHS Training Course

Date: Monday, November 4 - Wednesday, November 6, 2013
Time: 8:00am - 5:00pm

This is a beginning to intermediate level course for naval architects, salvors and others whose work requires the use of the GHS software. Topics include: Section Editor, Part Maker and Model Converter Modules; basic concept and principles; model building; run files; GHS commands and the command language including macros and variables; creating tables and graphs; load conditions; stability criteria; intact and damage stability; wind heeling moments; free surface issues; longitudinal strength calculations including waves; tank characteristics and tables; floodable lengths; introduction to Load Editor; and possibly time for last day topics from students.

For more information, contact John Christian
support@ghsport.com

CD-adapco - The Virtual Tow Tank

Date: Tuesday, November 5, 2013
Time: 8:00am - 5:00pm

The aim of this one day short course is to teach the techniques needed to conduct accurate and efficient marine simulations using computational fluid dynamics. The course is structured as a combination of lectures, demonstrations and workshops (tutorials). Best practices for meshing and analysis of stationary and multi-degree-of-freedom (DOF) free-surface applications are emphasized and demonstrated. Attendees will leave the short course having constructed a model of a typical ship geometry and set up a resistance analysis. Examples will also be shown of calculating sinkage and trim, seakeeping and the modeling and analysis of propellers.

For more information, contact Bryant Aliaga
Bryant.Aliaga@cd-adapco.com

To register for the SNAME 2013 Annual Meeting and Expo, view the conference schedule, get expo information and learn about sponsorship opportunities, visit www.sname.org/2013AnnualMeeting or contact Alana Anderson, Director of Events, 1+201.499.5066 or alana@sname.org.

The Society of Naval Architects and Marine Engineers is an internationally recognized nonprofit, technical, professional society of individual members serving the maritime and offshore industries and their suppliers. Founded in 1893, the Society comprises over 8,000 individuals throughout the United States, Canada and abroad. Membership is open to all qualified applicants in or associated with the maritime, offshore and small craft industries.

sname.org

Maritime Reporter May 2015 Digital Edition
FREE Maritime Reporter Subscription
Latest Maritime News    rss feeds

People & Company News

Baltic Mercur II makes maiden voyage to Antwerp

This week Atlantic Ro-Ro Carriers (ARRC) celebrates the maiden voyage of the Baltic Mercur II via the port of Antwerp as part of their regular transatlantic service to the US Gulf.

USCG Provides Safety Tips to Paddlesports Enthusiasts

As the boating season unofficially begins, the 9th Coast Guard District is reminding paddlesport enthusiasts to take precautions to ensure safe trips and increase

USS George Washington Completes Carrier Qualifications

Carrier Air Wing (CVW) 5 and the Nimitz-class aircraft carrier USS George Washington (CVN 73) completed its carrier qualifications (CQ), May 23. CQ allows

Offshore

Mobil Says Oil Discovery off Guyana is 'Significant'

Unlike almost all its neighbors, Guyana isn’t an oil producer yet. But the energy giant Exxon Mobil recently announced it had discovered “significant” oil off the coast.

US Oil Platform on Fire in Gulf Of Mexico

An oil platform caught fire and was evacuated in the U.S. Gulf of Mexico offshore Louisiana in the early hours of Friday, though no injuries were reported, the U.

IMO Adopts Polar Code Environmental Provisions

United Nations' International Maritime Organization (IMO) has adopted the environmental part of the Polar Code. Hereby, internationally binding regulations on

Navigation

Seaway to Receive Prestigious OECD Award

The St. Lawrence Seaway Management Corporation (SLSMC) announced today that it will receive a prestigious award from the Organization for Economic Cooperation

IMO Adopts Polar Code Environmental Provisions

United Nations' International Maritime Organization (IMO) has adopted the environmental part of the Polar Code. Hereby, internationally binding regulations on

NAVTOR AS, Nautic AB Launch Complete Navigation Solution

E-navigation specialist NAVTOR has joined forces with Nautic AB, a provider of navigational equipment, charts and publications to the Swedish market, to launch NAVTOR NAUTIC AB.

Education/Training

Shanghai Shipyard Won Bid for Two Survey Vessels

Shanghai Shipyard has won bids to build two multipurpose survey vessels for two geological survey institutes. The shipyard is an affiliate of China State Shipbuilding Corporation (CSSC).

USCG Tall Ship Sailing to the Bahamas

The U.S. Coast Guard Cutter Eagle is scheduled to arrive at Berth 14 at Prince George Wharf in Nassau, Bahamas on Thursday, May 28 as part of its 2015 cadet summer training deployment.

Volume Up in Dutch Maritime Technology Sector

The Dutch maritime technology sector has had a good year. Turnover increased by 17%, from EUR 6.4 billion in 2013 to EUR 7.5 billion in 2014. The sector employed 31,680 FTEs, up from 29,361 in 2013.

Salvage

Norwegian Dawn Arrives In Boston

The Norwegian Dawn, the cruise liner that ran aground as she left Bermuda this week, has arrived in Boston.   A story in the Boston Herald says, “Passengers

Oil Leak Contained at MV Miner Site

On-site workers acted quickly to contain an oil leak during the final stages of removing the wreck of the MV Miner off Scaterie Island, says the government of Canada’s Nova Scotia province.

Indonesia Sinks Boats from China

According to The China People's Daily, Indonesia has just sank a large Chinese vessel and 40 other foreign ships caught fishing in The South China Sea.    The

LNG

Red Tape, Industrial Relations Could Stifle LNG Potential

Australia could develop the world’s most technologically advanced LNG industry, according to a report by Accenture. But if industry is to reach its potential

Egypt's $3 Bln LNG tender in June

Egypt is reportedly to issue a tender in early June to buy up to $3 billion of liquefied natural gas over 2016 and 2017, Reuters reports.   The country recently

Gail to Sell LNG Supplies from US to Shell?

GAIL (India) Ltd has signed a preliminary deal with Royal Dutch Shell for the potential sale of liquefied natural gas (LNG) supply sourced from its portfolio, made up of US production,

Naval Architecture

Alaska, Washington to build Arctic Icebreakers

Senator Lisa Murkowski, Alaska, and Senator Maria Cantwell, Washington, have introduced a bill that would authorize the Navy to build up six icebreakers for use by the U.

China, Russia Conclude Naval Drill

Russia and China naval forces concluded their first-ever joint military exercise in the Mediterranean Sea this morning, according to an online news briefing from the Chinese Defense Ministry.

SSI to Showcase New Software at Nor-Shipping

SSI informs it will showcase the latest versions of its CAD/CAM software, ShipConstructor and EnterprisePlatform, at Nor-Shipping 2015, June 2-5. SSI CEO Darren

News

Singapore and China Conclude Naval Drill

The Republic of Singapore Navy (RSN) and the People's Liberation Army (Navy) (PLAN) concluded the inaugural Exercise Maritime Cooperation, a new bilateral naval exercise series on Tuesday (May 26).

US Senators Want a Stop to Arctic Drilling

Eighteen U. S. senators have urged the Obama’s administration to halt Shell’s Arctic drilling plans saying that it is an unacceptable and irresponsible decision, says a report in Reuters.

Norwegian Dawn Arrives In Boston

The Norwegian Dawn, the cruise liner that ran aground as she left Bermuda this week, has arrived in Boston.   A story in the Boston Herald says, “Passengers

Arctic Operations

US Senators Want a Stop to Arctic Drilling

Eighteen U. S. senators have urged the Obama’s administration to halt Shell’s Arctic drilling plans saying that it is an unacceptable and irresponsible decision, says a report in Reuters.

Arctic Sea Ice Decline

Sea ice in the Arctic Ocean is at its lowest May level since records began in the 1980s, says Al Jazeera.    The lowest levels in the history of Arctic sea ice

Alaska, Washington to build Arctic Icebreakers

Senator Lisa Murkowski, Alaska, and Senator Maria Cantwell, Washington, have introduced a bill that would authorize the Navy to build up six icebreakers for use by the U.

Software Solutions

LR Establishes Applied Technology Group

Lloyd’s Register establishes the Applied Technology Group, centered around the activities of Martec Limited   The Applied Technology Group (ATG) describes is

SSI to Showcase New Software at Nor-Shipping

SSI informs it will showcase the latest versions of its CAD/CAM software, ShipConstructor and EnterprisePlatform, at Nor-Shipping 2015, June 2-5. SSI CEO Darren

Globavista Launch Software Product Update

Globavista drives greater efficiency in vessel fleets by providing enhanced operational intelligence to fleet managers with new software product updates, the developer announced.

 
 
Maritime Contracts Maritime Security Maritime Standards Naval Architecture Navigation Pipelines Port Authority Ship Electronics Ship Repair Ship Simulators
rss | archive | history | articles | privacy | contributors | top maritime news | about us | copyright | maritime magazines
maritime security news | shipbuilding news | maritime industry | shipping news | maritime reporting | workboats news | ship design | maritime business

Time taken: 0.3703 sec (3 req/sec)