Marine Link
Tuesday, March 19, 2024

Ecofix Filler Coat Cuts Rudder Repairs Cost

Maritime Activity Reports, Inc.

July 26, 2016

With an increasing trend for thruster and rudder manufacturers finishing their products with self-cleaning protective hard coatings, Antwerp headquartered Subsea Industries has introduced a filler coating for use with its award-winning Ecoshield hard coat system.

Ecofix, specifically formulated to provide shiprepairers and Original Equipment Manufacturers with a cost-effective solution for the repair of corroded or pitted steel surfaces, returns the thruster or rudder to its original state prior to touching up the repaired area with Ecoshield.

Boud Van Rompay, Executive Director of Subsea Industries, said: “We are seeing an increasing number of propulsion and steering equipment suppliers apply tough hard coatings to their equipment for maximum protection against cavitation and abrasion damage, both of which can lead to widespread corrosion if conventional coatings fail.

“When a rudder or other piece of underwater gear has not been properly protected, the surface will become corroded. Cavitation damage can cause severe pitting and the steel needs to be restored to its original shape with a smooth surface prior to recoating.

“This is where Ecofix comes in. It has been developed to repair most pitting or corrosion damage on rudders, stabilizer fins, thrusters and other underwater gear. It’s as tough as the steel itself,” said Van Rompay.

With extraordinary bonding and hardness properties, Ecofix is an effective alternative to metal facing or very expensive fillers. And because it is part of the Ecospeed/Ecoshield family, it is non-toxic and extremely durable.

Since Ecofix uses the same basic resin as Ecoshield, the coating can be applied just one hour after applying the filler.

“Ecoshield is the only coating known to fully protect rudders and thrusters from all cavitation damage for the remainder of a vessel’s service life. Now with the launch of Ecofix, the repair work needed on the underlying steel can be done effectively and economically,” said Van Rompay.
 

Subscribe for
Maritime Reporter E-News

Maritime Reporter E-News is the maritime industry's largest circulation and most authoritative ENews Service, delivered to your Email five times per week