Propeller Systems News

Swansea-based HST Marine, a Purus Wind company, is using Reygar’s BareFLEET technology to understand and report on the performance of its hybrid Crew Transfer Vessels (CTVs), and reduce emissions.The company currently has four hybrid CTVs in operation with three more soon to enter service, all of which have BareFLEET installed. These vessels are a mix of both controllable and fixed pitch propeller systems that take power from either a high-efficiency electric motor or the main engine…

Norway's Kongsberg Maritime has won an order for six sets of controllable pitch propeller systems from South Korea's Hyundai Heavy Industries for installation in six new 94-meter offshore patrol vessels for the Philippine Navy.Each propulsion set will consist of twin Kongsberg Kamewa Controllable Pitch Propeller (CPP) 86 A/5 D-B systems, as well as shaft lines, hydraulic power units, local operating panels, and accessories. The first shipset will be delivered in August 2024.The six new offshore patrol vessels (OPVs) are part of a major upgrade to Philippine naval capacity.

Kongsberg Maritime (KM) announced it is dividing its propeller systems into three distinct categories, C-Line, P-Line, and X-Line.The ‘C’ in C-Line stands for ‘Configured’, and indicates that these propellers are configured within a pre-defined technical spectrum to suit customers whose priorities are short lead times and a strong performance-to-cost ratio, the manufacturer said. Numerous options are available within the C-Line propeller solution to fine-tune the offering further, presented in a lucid and straightforward manner which simplifies the decision process for customers.

Sea Change - America’s first hydrogen powered ferrySWITCH Maritime’s new 70-foot passenger ferry Sea Change is navigating uncharted waters as the United States’ first zero-emissions, hydrogen fuel cell-powered, electric-drive ferry.The pioneering aluminum newbuild, constructed by Bellingham, Wash. shipbuilder All American Marine, Inc. (AAM), has been completed and was launched this summer, though permitting of hydrogen fuel systems for maritime vessels is still being worked out with the U.S. Coast Guard.“Legislation and laws for passenger safety did not exist yet for this type of vessel.

In a typical year, the waters surrounding British Columbia’s Port of Vancouver host approximately 3,000 deep sea commercial vessels and 19 of the 35 ferries operated by BC Ferries, one of the largest ferry operators in the world. These waters are also home to a wide variety of aquatic wildlife, including the southern resident killer whales (SRKW), which have been listed as endangered in Canada since 2003.With vessel-generated acoustic disturbances identified by Fisheries and Oceans Canada as one of four key threats to the SRKW…

Belle Chasse, La. shipbuilder C&C Marine and Repair has delivered the new towboat Bowling Green to Kirby Inland Marine, L.P.The newbuild—the second in a three-boat series for Kirby, delivered six months after the first vessel—will operate it under a long-term lease from Hines Furlong Line.The triple-screw 6,600-horsepower towboat measures 170’ x 50’ with the pilot house eyeline measuring at 39’-3”. The Bowling Green was designed by CT Marine, LLC, based in Portland, Maine. The vessel’s design includes three Cummins QSK60-M main engines…

C&C Marine and Repair has delivered the new towboat Olive Parker to Parker Towing Company. The vessel is the first the Belle Chasse, La. shipbuilder has built for the Tuscaloosa, Ala. based company.The 4,400-horsepower towboat measures 147.5’ x 34’ x 10’-9” with the pilot house eyeline measuring at 33’. The Olive Parker was constructed based on a collaborative design by Parker Towing Company and CT Marine, LLC, based in Portland, Maine. The vessel’s design includes two owner furnished CAT 3516B main engines…

This year, despite innumerable challenges and setbacks, a great number of new U.S.-flagged vessels made their way into service. In addition to Maid of the Mist's new electric tour boats James V. Glynn and Nikola Tesla featured Wednesday, the newbuilds highlighted below are some of the most noteworthy to come out of U.S. shipyards in 2020.DredgerU.S. dredging contractors have been adding tonnage in a big way. This Spring, Callan Marine added a significant piece to the U.S. fleet with its new Jones Act cutterhead suction dredge (CSD) General MacArthur.

Norwegian maritime equipment and systems provider Kongsberg Maritime has won a contract to deliver propeller systems for five F110 frigates, currently in construction for the Spanish Navy. The contract, with the Spanish shipbuilder Navantia, is worth NOK 200 million (22,1 million).Destined for Anti-Submarine Warfare (ASW) operations, each vessel will be fitted with twin Kongsberg Kamewa Controllable Pitch Propeller (CPP) systems, developed for minimum noise and vibration throughout the system…

Belle Chasse, La. shipyard C&C Marine and Repair announced Wednesday it has delivered the first in series new 6,600-horsepower triple-screw towboats for Nashville-based Hines Furlong Line.Scarlett Rose Furlong measures 170’ by 50’ with the pilot house eyeline measuring at 39’-3”.Designed by CT Marine based in Portland, Maine, the vessel includes three Cummins QSK60-M main engines, provided by Cummins Mid-South, that are paired with three Reintjes WAF 1173 H/V reduction gears, provided by Karl Senner, LLC.

Rolls-Royce and the Defense Production Act Title III office will invest millions of dollars to upgrade the company’s capability and capacity for U.S. Navy ship propulsion components in its facility in Pascagoula, Miss.The DPA Title III office has already agreed to invest $22 million for equipment, with Rolls-Royce making an additional investment for building improvements, supplemented with support from Jackson County and the state of Mississippi.Naval components manufactured by Rolls-Royce at Pascagoula include controllable-pitch propeller systems, fixed pitch propellers, and water jets.

Shipbuilder China Merchants Heavy Industry (Jiangsu) is building a new cruise vessel for owner Changjiang Cruise Overseas Travel.The CSC-designed vessel is intended for operation on the Yangtze River, the largest river in China, and is scheduled to enter service in September 2021.The 150-meter-long long and 23-meter-wide vessel will reach an operating cruise speed of 14 knots. It will accommodate 600 guests served by 150 international crew members.German propulsion manufacturer SCHOTTEL said it has been awarded a contract to provide azimuth thrusters for the newbuild…

At one time the most powerful lighthouse in the United States was Twin Lights in Highlands New Jersey. Today it is a wonderful little museum and right now it has a very interesting show of paintings by Maarten Platje on the War of 1812. One painting is called the Great Chase and it tells this amazing story of the US Frigate Constitution being becalmed off the New Jersey coast and becoming engaged in a rowing race to keep out of range of a powerful British Squadron. The Constitution escaped and went on to have her amazing victories that year…

The first two American-made Voith Schneider Propeller (VSP) units have been delivered and installed in the Rodanthe ferry.Rodanthe is a ferry to be operated by the North Carolina Department of Transportation (NCDOT) and used in its service to the Outer Banks, a string of barrier islands between North Carolina and the Atlantic Ocean.“With the new VSP units installed, the Rodanthe will offer years of smooth, efficient service to the islands. By linking steering and propulsion together, the VSP allows for fast response and precision movement in even the roughest of waters. This helps the operators pilot their ferry better while also keeping passengers and cargo safe thanks to the VSP’s superior handling in comparison to other propulsion systems available on the market…

A new US-flagged inspection, maintenance and repair (IMR) vessel leverages three different propulsion systems for improved maneuverability and a high free running speed.The IMR vessel Paul Candies, built in 2018 by Louisiana builder Candies Shipbuilders and owned by its parent company Otto Candies, is equipped with two Combi Drives, two transverse thrusters and one retractable rudderpropeller from manufacturer SCHOTTEL.Due to two type SCD 560 STP SCHOTTEL Combi Drive azimuth thrusters the diesel-electric vessel reaches a top speed of 14 knots.

The SCHOTTEL After Sales Team has carried out a modernization on two double-ended ferries operated by FinFerries. Both vessels, capable of holding either 14 cars or up to 60 tons of payload, were originally equipped with various propeller systems manufactured in different years. For the retrofit, the state-owned operator requested a tailor-made concept to allow the same propeller assembly to be used. At the same time, the solution had to be quick and easy to install.In each ferry, two SCHOTTEL Rudderpropellers type SRP 150 have been installed.

SCHOTTEL has been chosen as propulsion supplier for two new build Ro-Ro ferries under construction at Damen Shipyards Mangalia, Romania. Each of the vessels ordered by Canadian Seaspan Ferries Corporation will be propelled by two SCHOTTEL Combi Drives and two SCHOTTEL Transverse Thrusters. The new ferries will join the company’s first two hybrid vessels, “Seaspan Swift” and “Seaspan Reliant”, which were commissioned just over two years ago. Seaspan Ferries currently operates a fleet of seven ferries out of four terminals in British Columbia…

SCHOTTEL said it has secured a contract to provide propulsion units for two new vehicle ferries ordered by North Carolina’s Department of Transportation, which operates the second largest state-run ferry system in the United States. The US-flag vessels designed by Elliott Bay Design Group are under construction at Gulf Island Shipyards in Houma, La., and will be equipped with a total of nine SCHOTTEL Twin Propellers type STP 150 L. The ferries are scheduled for delivery in 2020.Each…

Brunvoll, a family-owned company headquartered in Molde, Norway, a company that designs, manufactures and services complete thruster sstems for maneuvering, positioning and propulsion of advanced vessels, this week signed an agreement with Incus Investor ASA to acquire all the shares in Scana Propulsion AS, including subsidiaries Scana Volda AS and Scana Mar-El AS in Norway and three sales companies located in the United States, Singapore and China. Brunvoll Holding AS signed an option agreement for the acquisition of Scana Volda AS Real Estate…

he first ever UK domestic dual-fuelled new build vessels will feature fully integrated Wärtsilä propulsion machinery packages. Wärtsilä will also supply extended engineering and site support services. The two ships, both 102 metre long ro-ro passenger ferries, are being built for Caledonian Maritime Assets Ltd (CMAL) based in Port Glasgow, Scotland. The contracts with Wärtsilä were recorded in December 2015. Besides being the first dual-fuel vessels for CMAL, they are also the first ever dual-fuel ships to be built in the UK. These will be built by Ferguson Marine Engineering Ltd. The yard is located on the River Clyde in Glasgow. "This project highlights the fact that high-end, technologically advanced commercial shipbuilding is again present in Scotland.

Propeller design and manufacturing company Stone Marine Propulsion has joined forces with NGC Marine of China to form a new supplier of propulsion solutions and marine gearbox equipment. The new U.K. based company, Stone Marine Propulsion NGC Ltd, is a subsidiary of Stone Marine Propulsion. It combines the experience of Stone Marine Propulsion in propeller design, hydrodynamics and metallurgy with that of NGC Marine Ltd, a manufacturer of marine propulsion and gearbox equipment. Units are available to suit a range of vessel types and sizes, including merchant, commercial and offshore. Already available are CPP propeller systems, Azimuth and Tunnel Thrusters of various types, and the company will also custom design and manufacture propeller, shaft and rudder products built.

Wärtsilä supplied the full propulsion package for National Marine Dredging Company's (NMDC) new, state-of-the-art Trailing Suction Hopper Dredger (TSHD) launched in September. The 6,000 m3 capacity TSHD was designed by the IHC shipyard in the Netherlands in close cooperation with NMDC. The customized solution combines a shallow draft and a deep dredging depth with high manoeuvrability. The vessel has been specially designed to operate in high ambient temperatures, and the Wärtsilä machinery is capable of operating efficiently in such conditions. The scope of Wärtsilä’s supply, which comprises two eight-cylinder Wärtsilä 32 engines specially tuned for dredging operations, two controllable pitch propeller systems and two tunnel thrusters, provides the required power and manoeuvrability.

Rolls-Royce announces today that Andreas Schell has been appointed as Chief Executive Officer (CEO) of Rolls-Royce Power Systems (RRPS). Andreas will join Rolls-Royce later this year, reporting to Chief Executive Warren East, and take up his new position from 1 January 2017, succeeding Dr Ulrich Dohle who is retiring. Andreas has a wealth of international leadership expertise, running large complex organisations involved in high-technology engineering across a number of sectors including aerospace and automotive in Germany, the UK and US. He has experience in operational transformation programmes, strategy and the development of new business models, products and markets.