Dredging at Jurong Port, Singapore

By Joseph R. Fonseca
Saturday, July 26, 2014
Jurong Port, Singapore

 

Dredging work will be carried out at Keppel Shipyard Benoi Road, off West Jurong Channel, from 28 July to 30 September.

As per the Maritime and Port Authority of Singapore Port Marine Notice No.98 of 2014, the works will be conducted 24 hours daily - including Sundays & Public Holidays - within the working area bounded by the following co-ordinates (WGS 84 Datum):

A) 1° 17.880'N / 103° 40.914'E

B) 1° 17.845'N / 103° 40.929'E

C) 1° 17.796'N / 103° 40.823'E

D) 1° 17.831'N / 103° 40.807'E

Dredging works will be carried out by the grab dredgers. The grab dredgers will be held by 4-point anchoring system and each anchor position will be marked by a yellow buoy, Fl Y 3s.

The dredgers, with hopper barges in attendance, will have a circular safety working zone of 50-metre radius centred at the dredgers. Dredged materials will be transported to the designated dumping ground by the hopper barges.

During the operation, the dredgers will be attended by tug boat. The tug boats will be used to shift the dredger.

A safety boat will be deployed in the vicinity of the working area to warn other craft of the project.

Craft involved in the works will exhibit the appropriate local and international day and night signals.

When in the vicinity of the working area, mariners are reminded to:

(a) Keep well clear and not to enter the working area;

(b) Maintain a proper lookout;

(c) Proceed at a safe speed and navigate with caution;

(d) Maintain a listening watch on VHF Channel 22 (Jurong Control);

and

(e) Communicate with Jurong Control on VHF Channel 22 for assistance, if required.

 

GAC Singapore at singapore@gac.com


 

Maritime Reporter July 2015 Digital Edition
FREE Maritime Reporter Subscription
Latest Maritime News    rss feeds

Ports

Two New Hybrid RTGs for Port of Shanghai

Corvus Energy informs it will provide the battery systems for an additional two hybrid solutions for new rubber-tired gantry cranes (RTGs) that will be produced

Puget Sound Reports Container Volume Growth

Less congestion and efficient cargo movement helped international container volumes through the Puget Sound gateway improve 14 percent in June compared to June 2014, the port reported.

Redesigned LaGuardia Airport to Include Ferry Terminal

The Port Authority of New York and New Jersey and Delta Air Lines are set to overhaul New York’s notoriously outdated and publically criticized LaGuardia Airport,

News

Two New Hybrid RTGs for Port of Shanghai

Corvus Energy informs it will provide the battery systems for an additional two hybrid solutions for new rubber-tired gantry cranes (RTGs) that will be produced

USCG Investigates Oil Slick off California Coast

The U.S. Coast Guard was investigating a large oil sheen off the California coast west of Santa Barbara on Wednesday, a spokeswoman for the agency said.   The slick,

Puget Sound Reports Container Volume Growth

Less congestion and efficient cargo movement helped international container volumes through the Puget Sound gateway improve 14 percent in June compared to June 2014, the port reported.

 
 
Maritime Careers / Shipboard Positions Maritime Contracts Maritime Standards Naval Architecture Navigation Pipelines Pod Propulsion Ship Electronics Ship Simulators Shipbuilding / Vessel Construction
rss | archive | history | articles | privacy | contributors | top maritime news | about us | copyright | maritime magazines
maritime security news | shipbuilding news | maritime industry | shipping news | maritime reporting | workboats news | ship design | maritime business

Time taken: 0.4776 sec (2 req/sec)