American Sensor Technologies Liquid Level Sensors

press release
Wednesday, August 29, 2012

Now Standard with ½" Conduit.

 

American Sensor Technologies, Inc. (AST) now supplies its liquid level sensors with ½" NPT male conduit fittings before the cable interface.  Certain customers prefer to install conduit over a cable.  This is beneficial if the sensor is going to be exposed to a liquid not compatible with the material, as well as adding stability in turbulent tanks.  For installations where the level sensor is threaded into a tank, customers prefer to install conduit to protect the cable from the work environment. 

 

AST4500, AST4510, and AST4520 level sensors are Class I Division 1 intrinsically safe, Groups C and D when installed with a barrier as well as ABS (American Bureau of Shipping) certified.  This allows the sensors to be used in remote monitoring and telemetry applications where liquids and gases are in hazardous environments.  Pressure ranges are available as low as 0-1 PSI (27.68 inches water column).  Voltage output signals are typically chosen for applications with low power and low current consumption, whereas 4-20mA is used for long distance transmissions.

 

The only non-hazardous area approved level sensor is the AST45PT, which combines pressure and temperature monitoring in a single device. 
   
For more information on level sensors, updated product images, and outline drawings, visit:
http://www.astsensors.com/pressure-sensor-products.php
 

Maritime Reporter October 2014 Digital Edition
FREE Maritime Reporter Subscription
Latest Maritime News    rss feeds

Marine Equipment

Wärtsilä Integrated Solutions for Maersk's AHTS Vessels

A new series of six Anchor Handling Tug Supply vessels to be built at the Kleven Verft AS in Norway for the Danish based Maersk Supply Service A/S - part of the A.

Third Strike, Mansour Is Out

The M/V "MANSOUR M" with IMO number 7600586 has been banned for the 3rd time after subsequent detentions after the second refusal of access order in the Paris MoU region.

MHI Completes Development of "Sayaringo STaGE"

Mitsubishi Heavy Industries, Ltd. (MHI) has completed development of the "Sayaringo STaGE," a next-generation LNG (liquefied natural gas) carrier. The Sayaringo

Classification Societies

ClassNK Approves Niigata Dual-fuel Engine Design

Classification society ClassNK has granted approval to the design of the new 28AHX-DF dual-fuel engine developed by Niigata Power Systems Co., Ltd. The new engine

DNV GL Examines Container and Bulk Shipping Trends

DNV GL’s latest Container Ship Forum and Bulk Carrier Forum looked at a broad spectrum of topics including environmental regulations, trends in ship design as well as the new DNV GL rule set.

Preparing for Low Sulphur Operation

Stricter limitations on sulphur emissions (SOx) will pose many challenges to ships operating in Emission Control Areas (ECAs). If not handled with care, switching

 
 
Naval Architecture Navigation Offshore Oil Pipelines Pod Propulsion Ship Electronics Ship Simulators Shipbuilding / Vessel Construction Sonar Winch
rss | archive | history | articles | privacy | terms and conditions | contributors | top maritime news | about us | copyright | maritime magazines
maritime security news | shipbuilding news | maritime industry | shipping news | maritime reporting | workboats news | ship design | maritime business

Time taken: 0.1761 sec (6 req/sec)