As Shale Oil Gains Slow, Deepwater Port Struggles for Customers
As U.S. shale oil boomed last decade, an oil pipeline company pitched an ambitious multi-billion-dollar export port off the Texas coast to ship domestic crude to buyers in Europe and Asia.In April, Enterprise Products Partners' SPOT became the first project to receive a license from the U.S. maritime regulator for a deepwater port that could load two supertankers, each of which can carry up to 2 million barrels of oil at a time.But multi-year regulatory delays, a loss of commercial backers and slowing U.S.
LMG Marin Tapped to Support Eastern Pacific eSAIL Install
LMG Marin France reports it has secured an engineering contract with Eastern Pacific Shipping (EPS) for integration of bound4blue eSAILsEPS will install its first ever wind-assisted propulsion system, three 22-metrer eSAILs o,n board the 2019-built oil and chemical tanker Pacific Sentinel in Q4 this year. The expected net gains in term of consumption are 10% subject to routing.LMG Marin said it worked with EPS, bound4blue, ABS to ensure preliminary feasibility studies of the turnkey eSAILs solution onboard the 183-metreâŠ
Eastern Pacific Shipping to Equip Pacific Sentinel with eSAIL Wind Propulsion System
Eastern Pacific Shipping (EPS) has signed a contract for its first ever wind-assisted propulsion system, partnering with bound4blue to install three 22-metre eSAILs onboard the Pacific Sentinel.The turnkey âsuction sailâ technology, which drags air across an aerodynamic surface to generate propulsive efficiency, will be fitted in fourth quarter of 2024.The wind-assisted propulsion technology is expected to help the 183-metre, 50,000 DWT oil and chemical tanker reduce overall energy consumption by approximately 10%âŠ
SAAM Towage Taps Markey for Winch Retrofit Project
Markey Machine won a first-ever contract from SAAM Towage to retrofit the controls on a Timberland towing winch aboard the Point Valiant, a tug based in Vancouver, B.C.SAAM first outlined the project to Markey last May, then hired Sentinel Survey, Markeyâs after-market service division, to undertake on-site inspection of the winch. Following inspection, Markey offered its Class I winch-control package, and SAAM responded with an order near the end of December. The winch controls package will be provided in mid-2024.âMarkeyâs achievements in workboat winches are widely knownâŠ
Cyan Renewables Enters UK Offshore Wind Market with Sentinel Buy
Cyan Renewables, a portfolio company of Seraya Partners, has acquired a majority stake in Sentinel Marine to strengthen its position in the UK offshore wind market and boost its local content.Singapore-based Cyan Renewables, Asiaâs first dedicated offshore wind vessel operator, has reached an agreement to acquire a 75% stake in Sentinel Marine, a maritime environmental response vessel operator in the UK that currently owns the youngest fleet of Emergency Response and Rescue Vessels (ERRVs) in the UK.Sentinel Marine boasts a fleet of 13 modernâŠ
Hunt Valve to Equip USCG Polar Security Cutter
Fairbanks Morse Defense (FMD), a portfolio company of Arcline Investment Management (Arcline), announced it has been awarded a purchase order to provide motor-operated valves (MOVs) through Hunt Valve for the U.S. Coast Guardâs (USCG) Polar Sentinel (WMSP-21). The cutter is the first of three multi-mission vessels that will comprise the Polar Security Cutter program, which is intended to supplement the USCGâs missions in the Arctic as well as Operation Deep Freeze in the Antarctic.âEvery ship has a crucial role to play in advancing American interests at seaâŠ
Tanker in Red Sea Targeted by Speedboat Gunfire and Missiles
A tanker in the Red Sea off Yemen's coast was fired on by gunmen in a speedboat and targeted with missiles, maritime sources said on Wednesday, the latest incident to threaten the shipping lane after Yemeni Houthi forces warned ships not to travel to Israel.A second commercial vessel was also approached by the speedboat in the same area though not attacked, British maritime security firm Ambrey and other sources said.Separately, a U.S. defence official in Washington said the U.S.
Commercial Ports Reopen in Wake of Typhoon Bolaven
Key commercial ports of Guam, Rota, and Saipan have been reopened in the wake of Typhoon Bolaven, the U.S. Coast Guard said."This decision, effective at noon on Oct. 11, 2023, follows meticulous assessments conducted by our dedicated crews and trusted partners." the Coast guard said.The Coast Guard Captain of the Port (COTP) has downgraded the Port Heavy Weather Condition to WHISKEY, signifying the ports' readiness to resume operations from a regulatory and navigation safety standpoint.TeamsâŠ
Vigor Begins Vessel Maintenance Project for USCG in Alaska
The U.S Coast Guard has awarded Vigor Alaska, a Titan company, a $3.65 million contract to perform maintenance and repairs on U.S. Coast Guard Cutter John McCormick at the Ketchikan Shipyard.Work on the project begins this week and will cover comprehensive maintenance and repair of the vessel. After USCGC John McCormick is dry docked, the team at Ketchikan Shipyard will inspect the hull plating, conduct maintenance on the ship's propulsion system and renew hull coatings, as well as several other key maintenance and repair operations.
SECNAV Visits Bayonne Dry Dock
Earlier this week, Secretary of the Navy (SECNAV) Carlos Del Toro along with U.S. Representatives Rob Menendez and Mikie Sherrill visited to Bayonne Dry Dock & Repair Corp. (BDD).As the U.S. places renewed emphasis on navy shipbuilding and ship repair, the SECNAV has made it a point to visit to naval bases, shipyards, depots, training ranges, tarmacs, and runways worldwide to witnessed firsthand the progress being made toward improving training, readiness, and modernization of the fleet and force.BDD has provided repair services to vessels ranging from small tugboats to U.S.
Bollinger Cuts Steel on Prototype Module for First Polar Security Cutter
Bollinger Shipyards this week announced it has begun cutting steel at Bollinger Mississippi Shipbuilding in Pascagoula, Miss. on the first of eight prototype modules that will become the foundation of the first U.S. Coast Guard Polar Security Cutter (PSC), USCGC Polar Sentinel (PSC-1)âthe first heavy icebreaker to be built in the United States in 50 years. "Today marks a significant step for both Bollinger Shipyards and the United States,â said Ben Bordelon, President and CEO of Bollinger Shipyards. âAfter over 50 years, we're back to building heavy icebreakers.
Foss Chooses Markey Machine for Winch Upgrades
Foss Maritime recently elected to refurbish two existing Markey winches aboard the Foss tug Hawaii.Though other options were considered, âthese winches have been ideal for bringing the barge up tight against the stern of the tug,â noted Fossâ Danny Riser, Captain. âThe brake-holding capacity of the 32s (Markey model DEPC-32) is well-suited for mounting on our 5200 HP Z-drive tugs. Iâve been a lifelong fan of Markey winches, so for us it was an easy decision.âThe tandem electric models had served so well historically that only refurbishment made sense.
US Coast Guard Cutter Maurice Jester Commissioned
The U.S. Coast Guardâs newest cutter, the Coast Guard Cutter Maurice Jester (WPC-1152), was commissioned on Friday at Fort Adams State Park, R.I.Lt. Terry Netusil, assumed command of the cutter during a ceremony presided over by Vice Adm. Kevin Lunday, the Coast Guard Atlantic Area commander. The Maurice Jester is the third of six Fast Response Cutters that will be homeported in Boston, serving along the 1st Coast Guard District.Built by Bollinger Shipyards, the Sentinel-class fast response cutter (FRC) is designed for multiple missionsâŠ
US Navy Sends a USV Through the Strait of Hormuz
The U.S. Navy on Wednesday sent an uncrewed surface vessel (USV) through the Strait of Hormuz as it ramps up its use of high-tech unmanned assets for patrols and monitoring at sea.The transit was reportedly the Navy's fist for a USV through the busy and strategically important strait, demonstrating the continued operational integration of unmanned and artificial intelligence systems by U.S. maritime forces in the Middle East.The L3 Harris Arabian Fox MAST-13 USV was accompanied by a pair of Sentinel-class Coast Guard cuttersâŠ
2023 US Shipbuilding Report
Much has changed since Marine Newsâ 2022 shipbuilding report published in March last year, and business opportunities in certain market segments continue to grow. But the shipyards that are looking to cash in are still facing many of the same challenges.For example, many American shipyards and their partners throughout the shipbuilding supply chain are still finding it difficult to attract and retain the workers they need. If youâre a skilled craftsperson looking for a job in shipbuilding, youâre in luck, because there are plenty of openings at shipyards across the country.
US Coast Guard Cutter Warren Deyampert Commissioned
The U.S. Coast Guardâs newest cutter, the Coast Guard Cutter Warren Deyampert (WPC-1151), was commissioned at Coast Guard Base Boston, March 30.Chief Warrant Officer Lance DeFoggi, assumed command of the cutter during a ceremony presided over by Vice Admiral Kevin Lunday, the Coast Guard Atlantic Area commander. The Warren Deyampert is the second of six Fast Response Cutters that will be homeported in Boston, serving along the 1st Coast Guard District.Built by Louisiana-based Bollinger ShipyardsâŠ
US Coast Guard Cutter Commanding Officer Relieved Following Fatal Collision
The commanding officer of a U.S. Coast Guard cutter has been relieved of duties following a fatal collision with a fishing vessel in August 2022.Lt. Cmdr. Benjamin Williamsz, former commanding officer of the USCGC Winslow Griesser (WPC 1116), was relieved of duties due to a loss of confidence in his ability to effectively command the cutter, the U.S. Coast Guard said. Rear Adm. Brendan C. McPherson, commander of the Seventh Coast Guard District, effected the relief on Friday.WilliamszâŠ
The More âEyes On The Waterâ, The Better
Manama, Bahrain -- Advancing maritime domain awareness in the U.S. Naval Forces Central Command/U.S. Fifth Fleet area of responsibility (AOR) is a challenging task. Yet keeping the sea lanes open is critical for the region, for the U.S. and the world.U.S. Naval Forces Central Command (NAVCENT), U.S. Fifth Fleet and Combined Maritime Forces (CMF) are all headquartered here in Bahrain, under the command of Vice Admiral Brad Cooper. U.S. Fifth Fleet oversees the operations for all U.S. naval forces in the Middle East.
Canada's New Oil Spill Response Barges Launched
Two new oil spill response barges were recently completed at ASL Shipyard in Singapore for Western Canada Marine Response Corporation (WCMRC).The two 3,500 tonne barges, Sentinel 303 and Sentinel 304, will be delivered to WCMRC in October, with arrival in Canada by the end of 2022. The response barges will join WCMRCâs fleet of pollution response vessels stationed along the south coast of British Columbia.These new barges represent a significant enhancement to the pollution response capabilities already in place and will benefit the entire local maritime industryâŠ
Bollinger to Acquire VT Halter Marine
Lockport, La. based Bollinger Shipyards announced it has entered into an agreement to acquire Pascagoula, Miss. shipbuilder VT Halter Marine, Inc. and neighboring repair yard ST Engineering Halter Marine Offshore (STEHMO) from parent company ST Engineering North America, the U.S. subsidiary of Singaporean multinational technology, defense and engineering group ST Engineering.The transaction, which is expected to close in the fourth quarter of 2022, is said to be worth $15 million, according to ST Engineering.
US Coast Guard Decommissions Bahrain-based USCGC Baranof
The USCGC Baranof (WPB 1318) was decommissioned during a ceremony aboard Naval Support Activity Bahrain, Monday.âUSCGC Baranofâs exemplary service to our nation is a testament to both the Island-class platform and the crews that have manned Baranof over the past 34 years,â said Vice Adm. Kevin Lunday, commander of U.S. Coast Guard Atlantic Area, who presided over the ceremony. âWhether it was conducting law enforcement and search and rescue in the Caribbean, or deploying to the present-day homeport of Bahrain to support U.S.
US Coast Guard Cutter William Chadwick Commissioned
U.S. Coast Guard Cutter William Chadwick (WPC-1150) was commissioned Thursday at Coast Guard Base Boston, as the first of six Fast Response Cutters to be stationed in the city.Admiral Steven Poulin, Vice Commandant of the Coast Guard, and Rear Adm. John Mauger, commander, 1st Coast Guard District, oversaw the ceremony, as Lt. Cmdr. Tyler Kelley assumed command of the 154-foot cutter and its crew. Under Kellyâs command, the 24-person crew will now conduct missions offshore of the Northeast United States.Built by Bollinger ShipyardsâŠ
Racing to the Bottom: Seabed Warfare Brings Threats, Opportunities
In the early morning hours of September 26, 2022, seismologists located throughout northern Europe detected two disturbances originating in the Baltic Sea that were consistent with underwater explosions. Within hours, an aerial image captured by a passing Danish F-16 showed an expanse of frothy seawater, suggesting that the Nord Stream 1 and Nord Stream 2 gas pipelines had experienced a catastrophic event. Within days, an investigation by the Swedish Security Service concluded that both pipelines had sustained extensive damage due to an act of gross sabotage.