Damen Performs Cruise Ship Maintenance

December 12, 2014

Astor and Marco Polo receive refurbishment and class survey work

Damen Shiprepair & Conversion has recently carried out a number of cruise ship repair and refurbishment projects in the Netherlands, including Astor and Marco Polo, both operated by Cruise & Maritime Voyages. The vessels have been at Damen Shiprepair Vlissingen (DSV) for a wide-ranging program of scheduled and unscheduled work. Damen carried out its scope within a tight timeframe so that both ships were ready for planned onward voyages.
Photo: Damen
Photo: Damen
Photo: Damen
Photo: Damen
Photo: Damen
Photo: Damen
Photo: Damen
Photo: Damen
Photo: Damen
Photo: Damen
Astor, with passenger capacity just over 600, arrived at DSV on October 17. Whie in port she underwent a DNV GL Class Survey as Damen carried out scheduled maintenance including high-pressure washing and painting of the underwater part of the vessel, overhaul of overboard valves, hull anode renewal, maintenance and recertification of lifeboats, gangway repairs and certification and renewal of ducting and ventilators from engine room air-supply.
Peter Sterkenburg, Head of Sales & Marketing at Damen Shiprepair & Conversion, said of the project, “The work on the Astor was not without its challenges – the sheer diversity of the tasks we performed ensured that. The logistics were perhaps the greatest consideration – we had to manage this extensive scope, alongside a class survey, whilst 140 of the vessel’s crew remained on board throughout. I’m pleased to say we did everything according to plan and all work was completed in time for Astor to sail on November 4.” The 176.25-meter ship sailed from Vlissingen to Tilbury in the U.K. where she collected the remainder of her crew and passengers for a voyage to Australia. 
Marco Polo arrived in Vlissingen on November 11. The vessel, though similarly sized to Astor, accommodates up to 800 passengers. Marco Polo was scheduled for a class survey and similar scope of maintenance to Astor. However, a recent grounding in Norway added an extra dimension to the project.
Sterkenburg said, “The grounding caused some minor steel damage to the flat bottom of the vessel, so we’ve had to factor that into the planning on top of the scheduled work and class survey. Naturally, this has made the work more challenging, but we are used to this kind of project and to reacting quickly when something changes. Everything went according to plan.”

Related News

SOVs – Analyzing Current, Future Demand Drivers Bourbon Orders Exail Tech to Streamline Subsea Fleet’s Services for Offshore Energy MOL and Gaz-System Sing Long-Term FSRU Charter for New Polish LNG Terminal Old Checklist Led to Helicopter Incident CBED Signs Up Siemens Gamesa for Wind Creation SOV’s First Job