Alaska Marine Highway System News

Vigor Alaska, a Titan Company, successfully completed a dry dock and repair work solicitation on U.S. Coast Guard Cutter John McCormick this month, returning it to service ahead of schedule.The $3.65 million contract was awarded in September 2023 and represents the first non-emergent maintenance solicitation awarded to the Ketchikan Shipyard since 2011.USCGC McCormick is homeported at Coast Guard Base Ketchikan, only 3.5 miles from the Ketchikan Shipyard.This was also the first time a vessel of USCGC McCormick's class has been serviced at Ketchikan Shipyard…

The U.S. Department of Transportation’s Maritime Administration (MARAD) announced over $653 million to fund 41 port improvement projects across the nation under the Port Infrastructure Development Program (PIDP).The investments—part of the largest dedicated funding for ports and waterways in history, nearly $17 billion through the President’s Bipartisan Infrastructure Law—are intended to help grow capacity and increase efficiency at coastal seaports, Great Lakes ports and inland…

The U.S Coast Guard has awarded Vigor Alaska, a Titan company, a $3.65 million contract to perform maintenance and repairs on U.S. Coast Guard Cutter John McCormick at the Ketchikan Shipyard.Work on the project begins this week and will cover comprehensive maintenance and repair of the vessel. After USCGC John McCormick is dry docked, the team at Ketchikan Shipyard will inspect the hull plating, conduct maintenance on the ship's propulsion system and renew hull coatings, as well as several other key maintenance and repair operations.

Hubbard, a new ferry built in 2019 for Alaska's Marine Highway System (AMHS), was formally christened this week after a change of plans put the vessel's entry into service on hold.The vessel is the second of two Alaska class ferries designed by Seattle-based Elliott Bay Design Group and constructed at Vigor Shipyard in Ketchikan, Alaska. Construction of both vessels began in October 2014. The series' first ferry, Tazlina, was christened in 2018, and Hubbard was completed in 2019.Intended to operate as day boats to serve the AMHS Lynn Canal route between Juneau…

With travel and tourism nearing pre-2020 levels, and transit systems benefiting from a return to work, passenger vessels have seen renewed activity. In its year-end review, John Groundwater, Executive Director of the Passenger Vessel Association (PVA), which advocates for the sector in Washington, D.C. wrote: “As we are nearing the end of the calendar year, we are delighted to report that our industry, and our members, are reporting far and wide that they have experienced very…

The U.S. Department of Transportation’s Federal Transit Administration (FTA) has announced $384.4 million in federal funding from President Biden’s Bipartisan Infrastructure Law for expanding and improving the nation’s ferry service in communities across the country, as well as accelerate the transition to zero emission transportation.In total, FTA is awarding 23 grants across 11 states and the U.S. Virgin Islands. Grants will fund projects including replacement of old vessels, expand fleets, and build new terminals and docks.

It’s a common story in the U.S. shipbuilding industry today. A piece of equipment that used to be available for delivery on short notice—maybe in one or two weeks—now must be ordered months or more in advance, and it costs double. Add to this rising steel prices and the labor issues that have pervaded nearly all industrial sectors since the early days of the pandemic, and it’s clear that business is far from usual for American shipyards.Bollinger Shipyards president and CEO, Ben Bordelon…

The year just ended, 2021, might be described as being about “trying to get back to normal”, across the entire transportation spectrum, two years into the pandemic. During this time, the decarbonization and electrification waves have swept across maritime passenger transport. The passenger side of the business is dependent on multiple funding sources; increasingly, this money will be driven by environmental and social considerations.The long-awaited funding of “infrastructure”-related projects…

Naval architecture and marine engineering firm Elliott Bay Design Group (EBDG) said its board of directors has appointed Robert Ekse as president of the firm. Ekse will assume the position from current president and chief engineer, Brian King, who is retiring after 33 years of service. King will remain active in EBDG projects in a limited capacity, accepting the role as principal emeritus."Brian will be deeply missed, but his many accomplishments will be a reminder of his contributions to our industry…

A suspect has been taken into custody following a bomb scare aboard a passenger car ferry in Juneau, Alaska, Wednesday morning.At 6:49 a.m., U.S. Coast Guard watchstanders received a call from the captain of the LeConte, reporting a bomb threat aboard the ferry scheduled to depart Juneau. Coast Guard law enforcement personnel conducted a security sweep of the vessel and found no credible threats.The suspect, who reportedly drove a vehicle onto the ferry and made the threats, has been apprehended by Juneau Police Department (JPD) and the vehicle was impounded without incident.The Coast Guard, which worked alongside Alaska Marine Highway System (AMHS) and JPD to ensure passenger safety and restore service…

MarineNews showcases the ten best of North America’s 2018 workboat deliveries. Domestic shipyard production is robust, innovative and getting greener. And, that translates into two kinds of ‘green.’As the domestic offshore energy support sector slowly awakens, other sectors have been happy to take the spotlight in its absence. As always, and if a hull was delivered in 2018, we took a look at it, with several areas as a focus for inclusion into this edition. For my part, I’m always excited when the U.S. boatbuilding sector can deliver for a foreign buyer. We’ve checked that box here. And, that’s because we can compete on price, quality and when we do…

Domestic ferries adjust their business models to met regulatory pressures and exceed environmental standards with an eye towards improved service. And, not a minute too soon. In North America, stalwarts in the ferry business continue to shorten journey times compared to surface alternatives, while at the same time, bring accessibility to barrier and coastal islands that would otherwise be impossible to reach. Established stakeholders continually fine-tune their operations in a…

A new shipbuilding and repair training program in Alaska aims to develop an advanced manufacturing workforce comprised of state residents. Shipbuilder and repairer Vigor has teamed up with the maritime workforce development network Maritime Works for a public, private and philanthropic initiative called Advancing Alaskan Workers, which will train Alaska’s next generation of advanced manufacturing workers. The initiative strives to combat the high turnover rates seen at Vigor’s Ketchikan shipyard and elsewhere that result when non-Alaskans are recruited to fill the state’s critical skills gap.

Navigating interesting times has the nation’s shipbuilding industry searching in unusual places. The answers could be blowing in the wind. Conducting commerce and forecasting the future for shipyards is akin to setting out in uncharted waters. For some, the voyage might prove to be easy sailing with favorable winds. Other times, it can be a rough ride, forcing long and unprogressive diversions. In the worst cases, one might run aground temporarily, hit rock bottom, capsize belly up, or be forced to turn around and give up.

The Alaska Marine Highway System (AMHS) has awarded the Alaska Class Ferry project to Vigor Alaska shipyard in Ketchikan, Alaska, where construction is currently underway. Providing production design for the ferry is Seattle-based naval architecture and marine engineering consultancy Glosten, who along with Vigor Alaska, are two of Cadmatic’s newest customers in the U.S. Delivering its design in the imperial unit versions of both Cadmatic Hull and Outfitting, Glosten’s production design of the Alaska Class Ferry represents the premiere application of Cadmatic 3D CAD/CAM engineering software in the northern U.S. The 280-foot, 300-passenger, 53-vehicle Alaska Class Ferry will primarily transit the Lynn Canal and shorter AMHS routes in Southeast Alaska.

Thordon Bearings has received an order to supply its COMPAC system to two Alaska Ferry newbuilds under construction at the Vigor Industrial shipyard in Ketchikan, Alaska. The Canada-based company, a supplier of seawater-lubricated propeller shaft bearings, will deliver the Environmentally Acceptable Lubricant (EAL)-compliant COMPAC propeller shaft bearing system for shaft diameters of 267mm (10.5”). Thordon has a strong history with Alaskan State Ferries with its seawater lubricated bearings installed on the Matanuska, Tustumena and Kennicott. Both of the twin-screw, 85m (280ft.) long Alaska-class ferries will have the capacity to carry 300 passengers and 53 standard vehicles and feature fully enclosed vehicle decks with bow and stern doors for quicker loading/unloading.

Thordon Bearings has received an order to supply its COMPAC system to two Alaska Ferry newbuilds under construction at the Vigor Industrial shipyard in Ketchikan, Alaska. The Canada-based company, a supplier of seawater-lubricated propeller shaft bearings, will deliver the Environmentally Acceptable Lubricant (EAL)-compliant COMPAC propeller shaft bearing system for shaft diameters of 267mm. The twin-screw, 280ft long Alaska-class ferries will each have capacity to carry 300 passengers…

Over the past several months, FVF Chenega, a high-speed car ferry in the Alaska Marine Highway System (AMHS) fleet, was repowered with four new MTU Series 4000 engines. In April, the project was completed with two days of successful sea trials in Seattle. Engineers from MTU America Inc., a Rolls-Royce Power Systems company, along with members of the Chenega’s crew and other AMHS representatives ran the ship through a series of extensive performance and endurance tests on Puget Sound. The results of the tests were positive, according to the crew and the engineering team.

Alaska can use an existing British Columbia ferry terminal for several more years if Canada enforces an order blocking so-called "Buy America" purchasing rules from being applied to its reconstruction, a state official said on Tuesday. A $15 million plan to overhaul the Prince Rupert ferry terminal, which is located in Canada, has escalated into a trade dispute with the United States. Alaska has refused to seek a waiver to the controversial law, designed to protect U.S. companies from foreign competition in transportation infrastructure projects. That prompted Canada on Monday to fight back by invoking rarely used anti-sanction laws that would prevent bidders on the project from agreeing to use only U.S.-made iron and steel, potentially delaying construction.

The Canadian government signed an order on Monday blocking the United States from applying controversial "Buy America" purchasing rules on the demolition and reconstruction of a ferry terminal that is located on Canada's Pacific Coast but operated by Alaska's Department of Transportation. The U.S. federal rules are designed to protect U.S. companies from foreign competition in transportation infrastructure projects. The state of Alaska has refused to waive the provisions for the $15 million rebuild of the Prince Rupert, British Columbia, ferry terminal although the project is solidly in Canadian territory. Canada is fighting back by invoking rarely used anti-sanction laws to prevent bidders on the project from agreeing to use only U.S.-made iron and steel.

Rolls-Royce has been selected by the Alaska Department of Transportation and Public Facilities, via its Alaska Marine Highway System, and Vigor Industrial, to provide a highly efficient propulsion system for its future Alaska Class ferries that will be built by Vigor Shipyards in Ketchikan, Alaska. The two Alaska Class ferries will feature a range of Rolls-Royce technology, including reduction gearboxes, tunnel thrusters and steering gears. A Rolls-Royce Promas propulsion system, which integrates controllable pitch propellers and rudders, will increase fuel efficiency and enhance manoeuvrability. "What is also exciting about this contract is that it represents the first time a ferry operator in North America will utilize our Promas integrated propeller and rudder system…

Ferries for Alaska’s harsh conditions, built in Alaska by Alaskans. Vigor and Elliott Bay Design Group team up for a winning combination as the new Alaska Class Ferry Project takes shape. With its network of islands and fjords, rugged mountains and spectacular tidewater glaciers, Alaska’s Inside Passage may make a perfect summer cruise destination, but locals can’t choose when they travel. So when Alaskans need transport, the Alaska Marine Highway System (AMHS) must find a way to move them.

The new Alaska Marine Highway System ferries, to be built by Vigor Industrial, will feature Rolls-Royce propulsion systems. Rolls-Royce has been selected by the Alaska Department of Transportation and Public Facilities, via its Alaska Marine Highway System, and Vigor Industrial, to provide propulsion systems for its future Alaska Class ferries that will be built by Vigor Shipyards in Ketchikan, Alaska. The two Alaska Class ferries will feature a range of Rolls-Royce technology, including reduction gearboxes, tunnel thrusters and steering gears.