Chloropac News

Evoqua Revamps SeaCURE BWM System

Using the same approved electrochlorination technology, Evoqua Water Technologies has remodeled its SeaCURE ballast water management system to provide optimum high flow rate performance from what is now one of the smallest electrochlorination system on the market. Introduced during the Nor-Shipping 2017 exhibition and conference, in Lillestrøme, Norway, the next generation SeaCURE System is a skid-mounted, plug-in-and-play ballast water treatment system that is 76 percent smaller and 85 percent lighter than earlier generations of the system.

Hai Cheung to Build Evoqua Seacure System Under License

Evoqua Water Technologies’ SeaCure ballast water management system (BWMS) continues to build momentum in the marine market. Today, the company expanded its global partnership network by joining forces with Hai Cheung, a leading marine equipment supplier to the Chinese market. Hai Cheung will initially support Chinese shipyards with the supply and service of Evoqua’s SeaCURE BWMS. In a second phase of the agreement, the Hong Kong-based engineering company will then produce the SeaCURE system under license to facilitate demand from Chinese yards.

Evoqua Introduces Service Solution for Electrochlorination Systems

Offshore and marine operators of electrochlorination-based marine growth prevention systems are set to benefit from a new maintenance and service initiative from the world’s leader in the market:  Evoqua Water Technologies. Bringing together more than 100 years of water treatment expertise from a number of the company’s brands and divisions, Evoqua Electrochlorination Services (EES) has been established to provide a total after-sales service solution for all electrochlorination marine growth prevention systems (MGPS), regardless of the manufacturer or design.

IBAIZABAL TANKERS Opts for SeaCURE BWTS

Spanish IBAIZABAL TANKERS has purchased two SeaCURE ballast water management systems (BWMS) from Evoqua Water Technologies to help ensure compliance with International Maritime Organization (IMO) ballast water regulations coming into force in 2017. The systems will be installed on two IBAIZABAL TANKERS Suezmax vessels – the Montestena and the Montesperanza – with preparation work due to be completed at the end of October 2016. The project will see Evoqua provide the full suite of its offerings to IBAIZABAL, including design capability, equipment and maintenance services.

Evoqua to Launch Updated MGPS at SMM

Evoqua Water Technologies will launch an updated version of its Chloropac Marine Growth Prevention System (MGPS) at maritime trade show SMM Hamburg on September 6, 2016. Designed to provide owners and operators with a cost competitive electrochlorination alternative to copper anode, Evoqua’s new efficient Chloropac system has been developed to reduce installation time and costs for owners and operators of larger vessels, as well as associated life time ownership costs of an MGPS system. The new Chloropac MGPS is a more compact version of the previous system which offers customers an on-vessel space reduction of up to 60 percent. The unit delivers substantial maintenance cost savings, cutting required service time significantly as a result of implemented design efficiencies.

Evoqua, Drew Marine Ink BWMS Deal

Evoqua Water Technologies and maritime solutions and logistics expert, Drew Marine, have announced a partnership to provide a full compliance package for ballast water management. The collaboration brings together Evoqua’s technology and Drew Marine’s engineering, logistics and service expertise to offer ship owners and operators expert assistance worldwide. The partnership will centre around Evoqua’s industry-leading SeaCURE Ballast Water Management System (BWMS). Both parties will collaborate during the SeaCURE BWMS sales process for new build vessels and retrofit opportunities. Drew Marine will then be responsible for the retrofit engineering…

SeaCURE BWMS Completes First Stage Testing

Evoqua Water Technologies has become the first company to complete low salinity (brackish) water testing for ballast water management solutions (BWMS), the company announced today. As part of United States Coast Guard (USCG) protocols, BWMS are designed to safely protect the environment and world economies from invasive aquatic species damage. Testing for the SeaCURE system for BWMS was completed at the Marine Environmental Resource Center (MERC) in Baltimore, Md. under rigorous conditions that replicate the environment in which the system will be operating…

SeaCURE BWTS Earns 2nd US Patent

Evoqua Water Technologies has been awarded a second United States patent on its technical solution for treating ballast water. This latest patent was granted by the United States Patent and Trademark Office on the 3rd of March, 2015. The patent describes a technical solution for treating ballast water under a variety of ambient water qualities. The quality of ambient water can vary widely from port to port where the ship is taking on its ballast. The unique features of Evoqua’s system include the use of oxidation reduction potential (“ORP”) devices to control certain SeaCURE* system operations. The patented SeaCURE system takes into account variations in demand and delivers biocide at the dose necessary for successful biofouling control…

BSH Certifies SeaCURE for Wide Range of Flow Rates

The Federal Maritime and Hydrographic Agency of Germany (Bundesamt für Seeschifffahrt und Hydrographie- BSH), which previously granted the Evoqua SeaCURE Ballast Water Management (BWT) system type approval, has now certified the SeaCURE system to operate in volumes from 500-4,000m3/hr. suitable for a wide range of container, LNG, tanker and other vessels. In addition to IMO type approval, the SeaCURE system also is USCG AMS accepted to operate in all salinities. SeaCURE is based on proven Chloropac marine growth prevention system (MGPS) technology that has been deployed in more than 2,500 installations worldwide over the past 35 years. evoqua.com

Seacure Higher Flow-Rate BWTS Certified by BSH

Evoqua inform that the Federal Maritime and Hydrographic Agency of Germany (Bundesamt für Seeschifffahrt und Hydrographie- BSH), which previously granted the Evoqua SeaCURE Ballast Water Management (BWT) system type approval, has now certified the SeaCURE system to operate in volumes from 500-4,000m3/hr. suitable for a wide range of container, LNG, tanker and other vessels. In addition to IMO type approval, the SeaCURE system also is USCG AMS accepted to operate in all salinities. The SeaCURE system utilizes a patented process that first injects biocide into ballast seawater before it reaches the large surface filter intakes to reduce the growth of marine organisms that can clog the filters.

SeaCURE BWTS Gains USCG AMS Acceptance

The U.S. Coast Guard (USCG) has granted alternate management system (AMS) acceptance of Evoqua Water Technologies SeaCURE ballast water management system for use in fresh, brackish and sea water. Evoquas AMS acceptance for use in U.S. waters is exceptional in the ballast water market in that it can operate in all salinities. As such, the SeaCURE ballast water management system provides ship owners with a type approved and AMS accepted solution that can be deployed in any trade lane.

Chloropac Anti-Fouling Selected for Largest Decommissioning Vessel

Allseas Group S.A., a global offshore pipe installation and subsea construction company, has selected Evoqua Water Technologies’ Chloropac electrochlorination system to protect onboard cooling water for Pieter Schelte, the world’s largest decommissioning and pipe laying vessel. The Chloropac system will protect the 382-meter long, 124-meter wide vessel’s onboard piping and equipment from marine fouling, which occurs when sea water is used in onboard processes such as a ship’s cooling systems and air conditioning.

BWTS SeaCURE Gains USCG AMS Acceptance

Evoqua Water Technologies LLC says that its SeaCURE Ballast Water Treatment System (BWTS) has been granted AMS Acceptance in all salinities. Following a rigorous review process, the manufacturers say that SeaCURE has been accepted for use as an AMS by the USCG. AMS acceptance means that vessel owners and operators are now permitted to use the SeaCURE ballast water treatment system in U.S. waters. SeaCURE has previously been type-approved by the International Maritime Organization (IMO) and BSH, the Federal Maritime and Hydrographic Agency of Germany (Bundesamt für Seeschifffahrt und Hydrographie). Evoqua also will apply for and undergo thorough testing required toward full USCG type approval. Currently, no ballast water treatment system has full USCG type approval.

Business is Brisk at Posidonia in Athens

In early June, the shipping community met in Athens, Greece for Posidonia 2014. While the focus in Athens tends to be skewed more toward the night life and after hour parties, Maritime Reporter was able to dig out some relevant product and service news from the exhibition center. Wilhelmsen Ship Service (www.wilhelmsen.com/shipsservice) introduced its fuel oil treatment range and integrated welding safety products and services at Posidonia. Engineered to maintain vessel performance and engine efficiency even when slow-steaming or burning low sulfur fuel…

Evoqua to Present SeaCURE Ballast Water System at Posidonia

Evoqua Water Technologies said it will present technical information about its type-approved SeaCURE Ballast Water Management System and applicability to newbuilds and retrofits at the Posidonia International Shipping Exposition in Athens, Greece. Evoqua Regional Manager Dimitrios Tsoulos will present “SeaCURE BWMS. Safety and Reliability Comes with Experience. Evoqua Water Technologies’ Answer to the Ballast Water Treatment Challenge.” from 11 a.m.-1:30 p.m. Thursday, June 5 in Posidonia Seminar Room 2. Tsoulos has worked in the water treatment industry for almost 10 years and is a certified project manager. Tsoulos will be joined by Lars Nupnau, who led the development and certification of the SeaCURE Ballast Water Management System.

SeaCURE Ballast System Earns Type Approval

The Federal Maritime and Hydrographic Agency of Germany (Bundesamt für Seeschifffahrt und Hydrographie- BSH) has granted type approval for the SeaCURE Ballast Water Management System. The SeaCURE system is now a product of Evoqua Water Technologies, formerly Siemens Water Technologies. BSH’s type approval of the SeaCURE system concludes the international approval process that began with the basic approval and then final approval granted by the International Maritime Organization (IMO) in 2012. The SeaCURE system utilizes a patented process* that first injects biocide into ballast seawater before it reaches the large surface filter intakes to reduce the growth of marine organisms that can clog the filters.

Siemens System Controls Filter Biofouling

The U.S. Patent Office awarded Siemens Water Technologies a patent for a system and method to control biofouling of filters used as a first stage of treating ballast water in its SeaCURETM Ballast Water Management System. The patent, entitled “Method and System for Biofouling Control of Shipboard Components” (U.S. patent no. 8,591,740 B2), involves injection of biocide into ballast seawater before it reaches the large surface filter intakes to reduce the growth of marine organisms that can clog the filters.

Siemens’ Ballast Water Management Anti-biofouling Earns U.S. Patent

The U.S. Patent Office has awarded Siemens Water Technologies a patent for a system and method to control biofouling of filters used as a first stage of treating ballast water in its SeaCURETM Ballast Water Management System. The patent, entitled “Method and System for Biofouling Control of Shipboard Components" (U.S. patent no. 8,591,740 B2), involves injection of biocide into ballast seawater before it reaches the large surface filter intakes to reduce the growth of marine organisms that can clog the filters.

BWMS Technology: US Patent Granted to Siemens

The U.S. Patent Office has awarded Siemens Water Technologies a patent for a system and method to control biofouling of filters used as a first stage of treating ballast water in its SeaCURETM Ballast Water Management System. The patent, entitled “Method and System for Biofouling Control of Shipboard Components" (U.S. patent no. 8,591,740 B2), involves injection of biocide into ballast seawater before it reaches the large surface filter intakes to reduce the growth of marine organisms that can clog the filters.

BAE Systems Awarded 'USNS Amelia Earhart' Overhaul Contract

In the latest listing of Department of Defense, Navy contracts, BAE Systems San Francisco Ship Repair, San Francisco, Calif., is awarded a $12,494,114 firm-fixed-price contract for a 59-calendar day regular overhaul and dry docking availability of dry cargo/ammunition ship USNS Amelia Earhart (T-AKE 6). Work will include inspection of the propeller shaft and stern tube, cleaning and painting of the hull, inspection and polish of the bow thruster propeller, installation of the chloropac unit, and overhaul of the seal valves.

Imtech's Venteville is Agent for Siemens BWT

Imtech Marine’s Venteville supplies new, environment friendly ballast water treatment system SiCure. Venteville, part of Imtech Marine, supplies systems for ballast water treatment and is agent for the new SiCure® system developed by Siemens Water Technologies. This is an environmentally friendly solution to prevent harmful foreign organisms from entering national waters via ballast water of ships. This ties in with the Ballast Water Treaty, which (in a phased manner and by 2016 at the latest) requires ships to have a system to purify water of harmful organisms.

Improving Fuel Efficiency and Maintenance Time Within The Chevron Fleet

Live water systems free of sea life are one reason why the Chevron fleet runs more efficiently and economically than others. Since 1995, a number of Chevron Shipping Company's crude oil tankers have been operating smoothly with electrochlorination systems, the generators of hypochlorite that in turn prevent the fouling of live water cooling systems. Hypochlorite is the active ingredient required for bio-fouling control. Produced in situ by the cell assemblies of the electrochlorination unit, the system eliminates microbiological organisms and macroinvertibrates without the need for back flushing or periodic cleaning. This saves valuable time when ships are in dry dock for annual maintenance and repair. According to W.

Siemens Provides Hypochlorination Systems for LNG Ships

Samsung Heavy Industries (SHI) has awarded Siemens Water Technologies an order for 14 Electrocatalytic Chloropac sodium hypochlorite generating systems. SHI, in turn, will install the systems on separate liquefied natural gas (LNG) carriers for three petrochemical companies. The Chloropac systems from Siemens will help prevent marine growth in the main components of the LNG carriers’ seawater cooling systems, including sea chests, piping, coolers, and heat exchangers. The first system was delivered to SHI in May, with subsequent deliveries scheduled throughout 2007 and 2008.