Cylinder News

When Bertrand Charrier worked with Jacques Cousteau four decades ago on the development of a revolutionary sail for the maritime industry, the time for widescale adoption of wind power wasn’t right. Now, he argues, there’s simply no time to waste.“Sometimes the best discoveries are rediscoveries.”Bertrand Charrier is a champion of simplicity. Sitting in a comfortable chair overlooking the rolling fields of rural France, he delivers frank observations backed by a blend of common sense and scientific expertise.The maritime industry…

Finnish technology group Wärtsilä reports it will supply the engines for a new Canadian Coast Guard Polar Icebreaker being designed and built at Seaspan Vancouver Shipyards.The 158 meter-long multi-mission Polar Icebreaker will operate under PC2 conditions with four 16-cylinder and two 8-cylinder Wärtsilä 31 engines, delivering 47 MW of power. The engines will be fitted with selective catalytic reduction (SCR) systems for IMO Tier III environmental compliance. Wärtsilä will also supply the center shaft line with a stainless-steel ice-class propeller…

Wärtsilä will supply the methanol-fueled auxiliary engines for five new container vessels for COSCO Shipping Lines and seven new container vessels for Orient Overseas Container Line.Each vessel will operate with three 8-cylinder and two 6-cylinder Wärtsilä 32M engines. This is the Chinese maritime sector’s largest order to date for methanol-fueled newbuild vessels. The order was booked by Wärtsilä in December 2023.To complement the solution, the ships will be equipped with the Selective Catalytic Reduction (SCR) exhaust cleaning systems and alternators.

WinGD will record the first installation of its new X-S short-stroke engine design following successful factory acceptance tests with engine builder Dalian Marine Diesel in March.The six-cylinder, 62cm-bore 6X62-S2.0 engine will be installed on a pulp carrier being built for a Chinese owner at COSCO Dalian shipyard.The X-S series succeeds the well-established RT-flex50 and RT-flex58 engines and is available in 52cm and 62cm bore sizes, for the range of fuel options including traditional diesel or dual-fuel LNG…

The German government is providing funding to support the installation of an auxiliary wind propulsion system on board a cement carrier vessel.Hamburg-based Baltrader Capital GmbH & Co. KG. has signed a contract with wind propulsion systems provider Norsepower for the delivery of one 24m x 4m sized rotor sail in summer 2024. The product will be fitted on the newest cement carrier of the Baltrader fleet, Cemcommander, designed by SDC Ship Design & Consultants GmbH and built by Jiangsu Zhenjiang Shipyard (Group) Co. Ltd.The Norsepower rotor sail is a modernized version of the Flettner rotor.

Matt Hart, Manager & Platform Leader, Marine & Stationary Power Systems, Wabtec, offers insights on how the megatrends of decarbonization, energy transition and autonomy all inspire and impact the marine power solutions from Wabtec.Matt, to start us off, can you provide insight on the journey to your present position?I graduated from the University of Notre Dame with an undergraduate in Mechanical Engineering and started with General Electric in the Edison Engineering Development rotational program at the Erie…

Dry chemical powder solutions have long safeguarded LNG and LPG cargo vessels, but as the industry embraces liquefied gases as a propulsion fuel, the unique requirements for protecting bunkering stations on a wider range of vessels, such as large cruise ships, containerships, and tankers, is becoming increasingly important. In response to the growing demand for advanced fire safety solutions to support the maritime's energy transition, Survitec has reconfigured and enhanced its Dry Chemical Powder (DCP) fire extinguishing system.

Fujian Mawei Shipbuilding and Xiamen Shipbuilding Industry in China have ordered four MAN 10L32/44CR main engines in connection with the construction of a quartet of 41,000 dwt oil-and-chemical tankers for Bremen-based German Tanker Shipping (GTS).The construction of the 199-meter Swedish Fartygskonstruktioner AB-designed newbuildings is set to start at Xiamen Shipbuilding with delivery scheduled from mid-2025 onward. The order includes options for an additional two vessels.Each…

The world's largest cruise ship is set for its maiden voyage on Saturday, but environmental groups are concerned that the liquefied natural gas-powered vessel - and other giant cruise liners to follow - will leak harmful methane into the atmosphere.Royal Caribbean International's Icon of the Seas sets sail from Miami with capacity for 8,000 passengers across 20 decks, taking advantage of the surging popularity of cruises.The ship is built to run on liquefied natural gas (LNG), which burns more cleanly than traditional marine fuel but poses greater risks for methane emissions.

Seakeeper has launched two new gyrostabilizer models the Seakeeper 10.5 and the Seakeeper 14, designed for vessels ranging from 50 feet to 68 feet long.The Seakeeper 10.5, engineered for boats 50-62 feet, evolved from its two predecessors, the Seakeeper 9 and the inaugural M7000 and offers 17% more angular momentum in 23% less volume.The Seakeeper 14, suited for boats 55-68 feet, bridges a gap in the current lineup between the Seakeeper 9 and the Seakeeper 18. The new model is is 43% smaller and 33% lighter than the Seakeeper 18.

MAN Energy Solutions has won the contract from Royal Boskalis to supply 3 × MAN 49/60 engines for a 31,000 m³ Trailing Suction Hopper Dredger (TSHD).Each engine will come accompanied by an exhaust-gas after-treatment system, namely an MAN Low-Pressure Selective Catalytic Reduction (LP-SCR) system, that ensures IMO Tier III compliance. The newbuilding will be built at Dutch shipbuilding company, Royal IHC, at its Krimpen aan den IJssel yard and is expected to enter service in mid-2026.The TSHD will be diesel-electric powered with two Azipods to allow vessel operation even at shallow draught.

Yanmar Power Technology Co., Ltd. (YPT), a subsidiary of Yanmar Holdings Co., Ltd., has embarked on the development of a hydrogen-fueled four-stroke high-speed engine for power generation for coastal vessels in Japan as part of the Nippon Foundation’s zero emission ship demonstration experiment. The engine utilizes hydrogen as a fuel, emitting no CO2 during combustion.In parallel with the hydrogen engine development, YPT will also work on the creation of a hydrogen engine-compatible hybrid electric propulsion vessel, combining hydrogen engine generators with batteries.

As maritime faces transcendent changes in terms of decarbonization and automation, Juha Kytölä, Director of R&D and Engineering, Wärtsilä, discusses how this Finnish maritime technology powerhouse is investing in the technologies and facilities that will drive the maritime industry for the coming generation, including insights on its unique arrangement for a future fuel engine testbed onboard Wasaline’s MS Aurora Botnia.To start off, can you give a scope of the Wärtsilä R&D investment?We invest heavily in research and development, about 4.1% of our annual turnover.

A collaboration between Oak Ridge National Laboratory (ORNL) and Caterpillar Inc. will investigate using methanol as an alternative fuel source for marine vessels.Members of the research team kicked off the project with the installation of a 6-cylinder engine at the Department of Energy’s National Transportation Research Center at ORNL.The ORNL and Caterpillar collaboration focuses on a four-stroke internal combustion marine engine that will be modified to run on methanol.Although methanol has many advantages, it is more difficult to ignite than diesel.

Fuel flexibility may be a key driver for recent developments in gensets, but the perennial goals of lowering CapEx and OpEx remain.Fuel flexibility is one of the pillars of decarbonization that is being embraced by genset OEMs. Fuel efficiency, a second pillar, goes hand in hand with that because new fuels will be more expensive, but these concerns come in addition to the on-going drive to reduce CapEx and OpEx for shipowners.MAN Energy Solutions introduced its auxiliary MAN 35/44DF CD engine in June 2023. It is designed to be future-proof and will be ready for methanol operation by 2026.

A maintenance error caused an engine room fire aboard the Endo Breeze last year, resulting in $1.2 million in damages, a National Transportation Safety Board (NTSB) analysis has shown.On April 29, 2022, the Endo Breeze was transiting outbound through the Raritan Bay West Reach channel near Staten Island, New York, when oil spray from a fuel injector pump on the starboard main engine ignited off nearby hot surfaces, causing a fire. The crew of the Endo Breeze contained the spread of the fire by removing fuel and oxygen sources…

MAN Energy Solutions has unveiled a dual-fuel version of its MAN 175D high-speed engine, capable of operating on methanol, that's scheduled to become available to the market by the end of 2026. The new variant, designated MAN 175DF-M, will be available both as newbuild and retrofit variants.MAN Energy Solutions states that the 175DF-M will be optimized for diesel-mechanical and diesel-electric propulsion to achieve the largest methanol share and best efficiency for various applications and load profiles.

China Merchants Energy Shipping (CMES), the Shanghai-listed shipping giant and daughter company of China Merchants Heavy Industry (CMHI), has ordered an MAN B&W 7G80ME-LGIM (-Liquid Gas Injection Methanol) main engine in connection with the construction of a very large crude carrier (VLCC). The first such dual-fuel methanol order for the ship type, Dalian Shipbuilding Industry Co (DSIC) will construct the vessel with delivery due by April 2026.CSE (China Shipbuilding Industry Corporation Diesel Engine Co.…

Chevron Marine Products’ Taro Ultra Advanced 40 oil has successfully passed NOL (No Objection Letter) requirements by engine manufacturer WinGD. This follows the earlier NOL award for Taro Ultra Advanced 40 from MAN Energy Solutions. This latest test validates the suitability of the oil for use in WinGD engines operating with liquid fuels containing sulphur in the range 0.00<1.50 % m/m, which includes very low sulphur fuel oil (VLSFO). The test also approved the general usage…

Wärtsilä announced it will supply its recently introduced Wärtsilä 25DF dual-fuel (LNG) engine for two new sail-assisted luxury cruise ships. The vessels are being built at the Chantiers de l’Atlantique (CdA) shipyard in France for Orient Express Silenseas, part of French hospitality group Accor. There is an option for an additional two vessels.The efficient and environmentally friendly Wärtsilä 25DF engine features a two stage turbocharging system, common rail fuel injection and cylinder wise combustion control.

Northern Lights Inc. (NLI) announced the launch of several new products hitting the market in 2024, including its new M4105 and M6105 genset series as well as the reintroduction of its Lugger propulsion engines with the L4105 and L6105 series.With kilowatt ratings from 125 to 245 at 60 Hz, the M4105 and M6105 series generator sets are built on Northern Lights’ robust base frame design for a clean, compact package sure to complement any engine room, the manufacturer said. Northern…

WinGD has secured the first ever approval in principle (AiP) for two‑stroke engines fuelled with ammonia.Lloyd’s Register awarded the AiP to WinGD’s X-DF-A dual-fuel range, and WinGD says this gives shipowners the assurances they need to realise vessel designs using ammonia-fuelled main engines. The first engine to be developed, the 52-bore X52DF-A, will be available for delivery from Q4 2024 and is applicable to a range of vessels including gas and bulk carriers.WinGD was able…

Pelagus 3D said Wednesday it had delivered a Return Oil Standpipe at Kobe, Japan, to be installed on Wallenius Wilhelmsen's RoRo vessel TYSLA. The collaboration involved Kawasaki Heavy Industries and Wilhelmsen Ship Management.Traditionally, the procurement, fabrication, and delivery of specific spare parts has been a time-consuming process, often leading to costly downtime for the maritime and offshore industries. However, with the advent of Additive Manufacturing (AM), also known as 3D Printing…