Foot Long Stainless Steel Reactor Vessel News

American Salvage Association member salvages Hydrogen Reactor outside of Seattle. A member of the American Salvage Association (ASA) responded to a call on December 9 to salvage a 485-ton, 140-foot long stainless steel reactor vessel that rolled off a barge, landing into approximately 60 feet of water near Cherry Point, WA. The reactor is an integral piece in the manufacture of low sulfur diesel fuel. The reactor was filled with nitrogen to prevent corrosion during transportation from Korea where it was fabricated.

Two Heavy Lift Derrick Barges used to raise 485 ton reactor off Cherry Point, WA. A 485 ton, 140 foot long stainless steel reactor vessel rolled off a barge into approximately 60 feet of water off Cherry Point, WA. The reactor was filled with nitrogen to prevent corrosion during transportation, one end rested on the sea floor, with the other end, just breaking the surface. Immediately after the incident, Global Diving & Salvage, Inc. provided an inspection class ROV to inspect the reactor for damage and asses its orientation on bottom.