McAllister’s New Tug Features JonRie Winches
Commissioned last week the new Tug Buckley McAllister is one of the most advanced Tractor Tug (ASD) on the U.S. East Coast. The new vessel is complimented with JonRie Winches fore and aft.
The new tug a Jensen design is name after the fifth generation of McAllister’s and new President Buckley McAllister. The vessel is a Tier III 5,150 HP along with an ABS Escort Service along with FiFi1. The vessel 92’ long with a beam of 36’ will be in service on the Cape Cod Canal.
The vessel was constructed at Senesco Marine of RI under the direction of Project Manager Richard Doughtry and Martin Costa VP of Engineering McAllister Towing. On the fore deck a JonRie Series 250 Full Render/ Full Recover winch with a line pull of 70 metric tons. The Escort Winch is supplied with 600’ of 9” Samson Saturn-12 hawser and winch braking force of 300 tons with a line speed of 100 FPM. The winch also features an Active Heave Compensation System for controlled payout (Freewheel) of the winch and recover when needed with constant scope. The system also includes dual Tension Systems with dimmable side light tension meters and foot control for hands free operation. Also supplied is a line tension data system for predicting rope life and replacement.
On the stern is a JonRie Series 512 Towing Winch with 2,100’ of 2 ¼” wire boasting a line pull of a 140,000lbs at 60 FPM. Both winches driven by a Hagglunds motor or direct drive the failure of over speeding a gearbox is never an issue as JonRie supplies a reliable system. When making up a Tow there is never a need to be back on deck as the level wind is independent and can be controlled and unclutched from the pilot house. Also a feature is the independent drive gypsy (Capstan) on the winch-No open clutches and no maintenance. The system is also supplied with a GREEN PASS PORT using GREEN oil in all systems.
marinewinch.com