New Pilot Boat Delivered to Brazos Pilots Association
Louisiana-based shipbuilder Metal Shark has delivered a custom welded-aluminum pilot boat to the Brazos Pilots Association in Freeport, Texas.
The new vessel, “Brazos Pilot,” is a 64’ x 19’ Defiant-class monohull pilot boat designed by Metal Shark and built at the company’s Franklin, Louisiana shipyard. This new pilot boat is intended to replace the pilots’ smaller, single-engine 40’ pilot boat, improving safety for crews while enhancing service to operators and providing around-the-clock service at Port Freeport.
Key operators who rely on the services of Brazos Pilots Association include Dow Chemical, Enterprise, Phillips 66, FLNG, and BP.
Following a christening ceremony on January 31st, the new vessel is now in service.
A spacious, climate-controlled wheelhouse employs Metal Shark’s signature “Pillarless Glass” for dramatically improved visibility, in a reverse-raked arrangement developed by Metal Shark specifically for pilots. Large overhead skylights provide upward visibility while approaching and operating alongside moving ships. Visibility is further augmented by the vessel’s centerline helm position.
Like all of Metal Shark’s pilot boat offerings, “Brazos Pilot” was designed by Metal Shark with extensive input from the client to result in a custom tailored vessel ideally suited for its specific mission profile.
In the wheelhouse, shock-mitigating seating has been provided for five crew members, with a footrest, cup holder, gooseneck light, and 110V USB plug at each seating position for comfort and convenience. A settee and table are also provided in the main cabin.
An integrated suite of navigation electronics includes GPS, radar, depth sounder, and AIS, which are accessed primarily through three 19” Furuno MU195T multifunction displays. These large touch-screen panels also display real-time video from a FLIR (“Forward-Looking Infra Red”) M400 thermal imaging system, as well as live onboard video feeds via two CCTV cameras installed in the engine room.
Spacious belowdecks crew quarters are accessed via a stairway in the wheelhouse and a watertight access hatch in the foredeck.
Accommodations include a galley area with microwave, coffee maker, refrigerator, and sink; an enclosed head compartment; double-tiered set of lockers for crew storage; and a berthing area with double bunk, drawer storage, and a 4K LED TV with Blu Ray player and KVH TracVision TV3 satellite television system. From the counter tops to ceiling panels and flooring, modern finishes are used to create a bright and airy, comfortable atmosphere for crews onboard for extended periods.
Outside, the 64 Defiant Pilot’s fully flush non-skid decks allow for unimpeded access around the vessel, and hand rails have been placed for easy reach at all times. Low-level LED pathway lighting enhances safety during nighttime operation.
To meet the client’s requirements, a large pilot transfer platform was engineered into the vessel’s foredeck, with a wide, integrated non-skid stairway and specially-configured safety rails.
To facilitate operation in close quarters, the vessel has been outfitted with a secondary control station on the aft deck, equipped with steering and throttle controls and a set of digital displays, which allow the operator to monitor engine performance while controlling the vessel from this station.
Powered by twin 803-horsepower Caterpillar C-18 diesel engines coupled to Twin Disc MGX5146SC transmissions and turning five-bladed 36” x 43” Nibral propellers, Brazos Pilot achieves a top speed in excess of 28 knots, with a nominal cruise speed of 18 knots.
Metal Shark is a diversified shipbuilder specializing in the design and efficient high quality construction of welded aluminum and steel vessels from 16’ to over 300’ for defense, law enforcement, and commercial operators. .