Bollinger Delivers for Bouchard
Pictured is Bouchard’s B. No. 295 and Bouchard Girls, converted and retrofitted by Bollinger Gulf Repair and Bollinger Algiers, as an OPA’90 compliant ATB unit. Bollinger Gulf Repair, L.L.C. and Bollinger Algiers, L.L.C, two Bollinger Shipyards, Inc., shipyards, have completed the retrofit and conversion of a Bouchard Coastwise Management Co., barge and tug, respectfully, to an articulated tug and barge (ATB) unit utilizing the Intercon Coupler System. At Bollinger Gulf Repair, the 446-foot, black oil Barge B. No.195 which has been renamed Barge B. No.295, was transformed from a single hull to double hull vessel to meet the requirements of OPA'90. The B. No. 295 measures 468-foot x 85.5-foot x 38.1-foot, with sixteen (16) cargo tanks.
Bollinger Converts Barge to ATB
Bollinger Gulf Repair L.L.C., (BGR), a Bollinger Shipyards, Inc., facility, has completed the retrofit and modifications of a Penn Maritime Inc. oceans tank barge to an OPA ‘90 compliant articulated unit. The 360-foot, 66,500 barrel black oil Barge POTOMAC arrived at Bollinger's New Orleans east facility and began the transformation from a single sided hull to double hull vessel with a new outer skin to meet the requirements of OPA '90. Her stern was modified and outfitted with the Beacon JAK connection system. The barges heating system received additional heating coils and a new 12 million BTU Vapower unit. A ballast system and a twelve-foot bow plug, along with an updated electrical system, were part of the conversions.
Bollinger Delivers for Bouchard
The Bollinger built 35,000 BBL tank barge B. Bollinger Marine Fabricators, L.L.C. delivered B. No. 231, the first of two double hull, 35,000 barrel (BBL) oil tank barge units built to meet OPA’90 requirements to Bouchard Coastwise Management. Morton S. Bouchard III, president and CEO of Bouchard Affiliates, said “The delivery of the B. No. 231 is another step forward for Bouchard, and our commitment to our customers to provide the highest quality equipment that meets their changing needs. The B. No. 231 is a manned, clean oil, oceans tank barge measuring 300-ft. long, with a 64-ft. beam and a depth of 21-ft.. The barge has ten cargo tanks, with Byron Jackson cargo pumps, driven by John Deere engines.
Bollinger Completes Tug and Barge Conversion
Lockport, La.-based Bollinger Shipyards Inc. reported two of its shipyards in New Orleans completed the retrofit and conversion of barge and tug to an articulated tug and barge unit utilizing the Intercon Coupler System. Bouchard Coastwise Management Co owns the barge and tug. Bollinger officials say the unique conversion work shows the shipyard’s flexibility to meet customer needs. “This double hulling of the Bouchard B. No. 295 and the re-fit of the tug Bouchard Girls using two separate Bollinger facilities exemplifies Bollinger’s unique ability to work with the needs of our customers to complete the job,” said Ben Bordelon, Bollinger’s executive vice president of repair.
Construction Continues on New Bouchard ATB
Bollinger Gulf Repair L.L.C., a Bollinger Shipyards, Inc., shipyard, has completed the retrofit of a Bouchard Coastwise Management Co., tug and barge to an articulated (ATB) unit utilizing the Intercon Coupler System. The 446-foot, 125,000 BBL (barrel) black oil Barge B. No.175 which was renamed Barge B. No.275, was transformed from a single hull to double hull vessel to meet the requirements of OPA ‘90. Her stern was modified with the matching Intercon ladder to accept the bow of the 127-foot tug CAPT. FRED BOUCHARD, which was retrofitted with ram assemblies of the Intercon system.
Bollinger Delivers Bourchard Barge
The Bollinger built 35,000 BBL tank barge B. No 231 sails past the Verrazano-Narrows Bridge entering New York Harbor as the latest addition to the growing OPAâ€™90 compliant fleet of Bouchard TransportationBollinger Marine Fabricators, L.L.C., Amelia, La., a Bollinger Shipyards, Inc. company, has delivered B. No. 231, the first of two double hull, 35,000 barrel (BBL) oil tank barge units built to meet the requirements of the Oil Pollution Act of 1990 (OPAâ€™90), to Bouchard Ocean Services, Melville, N.Y. The B. No. 231 is a manned, clean oil, oceans tank barge measuring 300-ft. long, with a 64-ft. beam and a depth of 21-feet. The barge has ten cargo tanks, with Byron Jackson cargo pumps, driven by John Deere engines.
Bollinger Modifies Vessel For Deeper Dredging
Two Bollinger shipyards have teamed to increase the dredging depth of the Pine Bluff Sand and Gravel Co. dustpan dredge, Wallace Mcgeorge, from 62-ft. to 75-ft., enabling it to dredge at higher river stages and dispatch sooner on a falling river. In the process, Bollinger Quick Repair, Harvey, La., fabricated and installed 45-ton, 36-ft. by 20-ft., port and starboard sections to the horn of the dredge, increasing the vessel’s overall length from 252.5 feet to 288.5 ft. The shipyard then installed a new 46-ton, 40-ft. wide by 15-ft. by 30-ft. high, A-frame which it had pre-fabricated for the dredge. The A-frame, which more closely resembles an inverted “U”…
Bollinger Delivers Second DH Barge to K-Sea
Transportation Corp., Staten Island, NY. '90 barge contract underway at Bollinger for K-Sea. 2002. in the second and fourth quarter of 2003. Inc. design. connection system designed and delivered by Acomarin Engineering. safety and reliability by operating as a dual mode ITB. cargo monitoring - as well as advanced electrical and hydraulic systems. products in ten tanks with capacities from 8312 BBL to 8668 BBL each. generator is powered by a Detroit Diesel series 71 engine. rate of 17,500 BBL per hour. outfitted with two Byron Jackson hydraulic deepwell pumps. "The legislation signed by President George H. Shipyards, Inc. single hull petroleum vessels and the pertinent legislation thereto. Some interests want that period shortened.
News: Bollinger Delivers Second DH Barge to K-Sea
Bollinger Marine Fabricators, Amelia, La., delivered DBL 81, an 80,000-barrel ocean service, double hull, oil tank barge built to meet the requirements of the Oil Pollution Act of 1990 (OPA '90) to K-Sea Transportation Corp., Staten Island, NY. It is the second of a four OPA '90 barge contract underway at Bollinger for K-Sea. DBL 101, a 100,000 BBL barge, the first of the four was delivered by Bollinger in July, 2002. The remaining two barges in the contract will each have capacities of 80,000 and 100,000 BBL's, and are scheduled for delivery in the second and fourth quarter of 2003. DBL 81 was built to a new design provided by Guarino and Cox naval architects and marine engineers, Mandeville, La., which was adapted from a Richard Taubler Inc. design.
News: Bollinger Refits Vessel for Deep Dredging
Exhibiting the cumulative strength of its vast organization, two Bollinger shipyards teamed on an innovative project to increase the dredging depth of the Pine Bluff Sand and Gravel Co. dustpan dredge, Wallace McGeorge, from 62-ft. to 75-ft., enabling it to dredge at higher river stages and dispatch sooner on a falling river. To complete the task, Bollinger Quick Repair, Harvey, La., fabricated and installed 45-ton, 36- by 20-ft., port and starboard sections to the horn of the dredge, increasing the vessel's overall length from 252.5 to 288.5 ft. The shipyard then installed a new 46-ton, 40-ft. wide by 15- by 30-ft. high, A-frame which it had pre-fabricated for the dredge.
Bouchard ATB Conversion Underway at Bollinger
Engineering and design work is underway at Bollinger Gulf Repair, New Orleans, for Bouchard Transportation Co., Inc. third retrofit project tug and barge to an ATB unit utilizing the Intercon Coupler System. The 446-ft. 125,000 BBL black oil Barge B No. 175 will be transformed from a singe hull to a double hull vessel to meet the requirements of OPA 90, and the stern will be notched to accept the bow of the 127-ft. tug Capt. Fred Bouchard, which will be retrofitted with the ram assemblies of the Intercon system. New heating coils will be added to the barge’s existing Hot-Oil system and a new ballast system will be installed. A keel cooled Detroit Diesel 8V-71 generator set producing 99 kW will be installed in the tug as back up for powering the Intercon system main generator.
Bollinger VP Larry Vauclin to Retire
Bollinger Shipyards, Inc. announced the upcoming retirement of its Vice President Central Division, Larry Vauclin. Vauclin’s retirement was announced by Bollinger Executive Vice President, Ben Bordelon, who said, “Larry has been a critical part of the growth of Bollinger over the past 16 years, and a mentor to many in the shipyard industry over his 52 year career. His attention to detail, hard work and focus on client satisfaction have helped create a solid foundation for us going forward.
Breathing New Life into Old Workboats
There is no question that timely repairs and preventative maintenance can extend the life of almost any workboat. It is also true that changing market conditions can lead to renovations to effectively extend the life of many vessels. The one event that triggers many repair projects is the Coast Guard's five-year hull inspection program, often referred to as a "shave and a haircut". Most operators use these occasions to inspect shafts, wheels and do top side repairs as well. With the hull is out of the water, not only can shafts, rudders and wheels be repaired, but also anodes replaced, sea chests inspected and the entire bottom given a coat of anti-fouling paint.
Bollinger Long-serve V-P Larry Vauclin to Retire
Bollinger Shipyards, Inc. announce the upcoming retirement of its Vice President Central Division, Larry Vauclin. Vauclin’s retirement was announced by Bollinger Executive Vice President, Ben Bordelon, who said, "Larry has been a critical part of the growth of Bollinger over the past 16 years, and a mentor to many in the shipyard industry over his 52 year career. His attention to detail, hard work and focus on client satisfaction have helped create a solid foundation for us going forward.
Bollinger Acquires Five Friede Goldman Shipyards
Bollinger Shipyards, Lockport, La. is now known as the largest vessel repair and conversion company in the Gulf of Mexico region upon its acquisition of the five shipyards of Friede Goldman Halter ship repair and conversion division. Bollinger now operates 12 dedicated ship repair and conversion yards totaling 42 drydocks situated between New Orleans and Houston, as well as two new construction shipyards in Lockport and Amelia, La. The acquisition is the result of an $80 million definitive agreement that was signed by both companies in May - subject to certain conditions and approval under the Hart Scott Rodino Act. The Bollinger-acquired properties are as follows: Halter Gulf Repair; Gretna Machine & Iron Works; Halter Calcasieu; Bludworth-Bond Houston and Bludworth-Bond Texas City.
Bollinger Wins 8th Consecutive SCA Safety Award
Bollinger Shipyards, Inc. was awarded the 2012 “Award for Excellence in Safety” by the Shipbuilders Council of America for the eighth consecutive year. On April 11, 2013, The Shipbuilders Council of America (SCA) presented the “Award for Excellence in Safety” to Bollinger Shipyards, Inc. during the association’s Spring General Membership Meeting in Washington, DC. The Award for Excellence in Safety is given to member companies with the lowest Total Recordable Incident Rates (TRIR) based on a quarterly injury and illness survey conducted by the association.
Bollinger Delivers DBL101
Bollinger Shipyards, Inc., Lockport, La., has delivered DBL101, the first of four Oil Pollution Act of 1990 (OPA’90) double hull, ocean service, oil tank barges to K-Sea Transportation Corp. While the DBL 101 was in the final stages of construction, Bollinger also retrofitted the K-Sea tug TASMAN SEA with a JAK coupler system, creating an ATB unit. Bollinger and K-Sea announced a newbuilding contract in March 2001, for the series of 4 barges with capacities of 80,000 to 100,000 barrels (BBL). Bollinger Marine Fabricators (BMF), Amelia, La., fabricated modules for the new 400-ft. by 74-ft. by 25-ft., 100,000 BBL barge and shipped them to Bollinger Gretna (Harvey, La.) for final assembly and installation of piping and other systems.
Bollinger Safety Program Achieves Milestones
Bollinger Shipyards, Inc. continues to achieve safety milestones changing the culture of shipyard safety awareness at its US based facilities. In the last quarter, Bollinger facilities at Algiers and Lockport New Construction both surpassed one year without a lost time accident. Of the many program achievements this year, the Bollinger Fourchon facility reached 10 years without a LTA, and the Bollinger Marine Fabricators’ facility reached an impressive 2,750,000 man-hours worked without a LTA. Achieving these significant accomplishments reinforces Bollinger’s commitment to provide world-class performance levels in all aspects of compliance at its twelve (12) shipyard facilities.
Bollinger Shipyards Announces New Leadership
Lockport, La.-based Bollinger Shipyards announced that Ben Bordelon will assume the duties of chairman, president and chief executive officer of the company. Ben Bordelon, along with the Chouest family from Galliano, La., has acquired all assets and stock of Bollinger Shipyards, Inc. Bordelon has served in many capacities during his career at Bollinger, and has been a member of the board of directors since 2002. He has served as executive vice president of repair and most recently as chief operating officer of Bollinger Shipyards. Donald G.
ATB New Construction and Retrofits Highlight Order Books for Southern Shipyards
Late last year was a high water mark of sorts in the Articulated Tug-Barge (ATB) business. In December, Crowley Maritime of Seattle, Wash. took delivery of their fourth ATB, featuring a 9,280 HP tug and a 155,000 barrel barge. Bay Shipbuilding, Sturgeon Bay, Wisc. built the barge. and the tug by sister company Marinette Marine, Manitowoc, Mich. At about the same time on the east coast K-Sea Transportation was taking delivery of their fourth ATB unit from Bollinger Shipyards, Lockport, La. All four of these new units featured new 80,000-100,000 barrel barges and existing tugs fitted with the JAK coupler system. In 2004, ATB construction has slowed a bit, but several companies continue contracting for retrofitted and new ATB units.
MN 100: Bollinger Shipyards
Established in 1946, the family owned and operated, Bollinger Shipyards group provides quality maritime construction, boat repair and conversion products and services to both the U.S. Military and the commercial marine industry. Four generations of Bollingers have been challenged to match the innovation, integrity and deep sense of responsibility that have become synonymous with the Bollinger way of doing business. Bollinger Shipyards specializes in new construction, steel fabrication, vessel repair and conversion of a wide variety of U.S.
Bollinger Increases Port Fourchon Capabilities
Bollinger’s repair and conversion shipyard at Port Fourchon, La., on the Gulf of Mexico, can now accommodate rigs, ships and boats with drafts to 27 ft., now that dredging is complete from the sea buoys in the Gulf to Bollinger’s Fourchon 350-ft. slip, which has also been deepened. “The deepened waterway and slip permit us to offer services to larger jack-up and matted rigs as well as bigger ships and boats. We also have additional shore power providing electrical power for vessels’ hotel loads as well as additional cherry pickers and forklifts that can lift from 20 to 55 tons," said Walter Berry, executive VP and COO. Berry added that…
Bollinger Awarded Six OSV Conversions from Hornbeck
Bollinger Shipyards, Inc. has been awarded a contract by Hornbeck Offshore Services (HOS) to convert six (6) 200 class DP1 offshore supply vessels (OSV’s), to 240 class DP2 OSV’s. The announcement was made by Bollinger executive vice president, Ben Bordelon, who said, “We are very pleased to announce the award of the HOS Super 200 conversion program. The news of the conversion program was announced by HOS on September 4th 2012, saying they have decided to implement a retrofit program to stretch and upgrade six 200 class DP-1 OSVs into 240 class DP-2 OSV’s.