Marine Supplier News

The first newbuild rigid inflatable boat (RIB) built by Dongara Marine has entered into service, heralding a raft of government and RIB contracts for the Western Australian boatbuilder.The newbuild, Cape Rose, was completed at the end of last year and has been operating for Marine Rescue Shark Bay since delivery to Denham in early in 2021. It has replaced a response vessel that had serviced the Western Australia (WA) coastline for more than 20 years, both with the group and previously…

ABS has joined an industry-leading joint development project (JDP) to accelerate development of solid oxide fuel cell (SOFC) technology with Alfa Laval, DTU Energy, Haldor Topsoe, Svitzer and the Mærsk Mc-Kinney Møller Center for Zero Carbon Shipping.Funded by a grant from Danish EUDP (Energy Technology Development and Demonstration Program), the partners will pursue a high-efficiency solution with the scalability to support marine industry decarbonization.ABS, a founding member of the Mærsk Mc-Kinney Møller Center for Zero Carbon Shipping…

Stena Line’s "next-generation" ferry Stena Estrid has arrived in Holyhead after completing sea trials and a five-week, 10,000 mile journey from China to the Irish Sea where she will begin service early next year on her inaugural route from Dublin to Holyhead.Designed by Deltamarin and constructed at the China Merchants Jinling Shipbuilding Weihai Shipyard in China, Stena Estrid is the first of Stena RoRo’s nine next-generation E-Flexer Ro-Pax vessels in a series which include five for Stena Line and several additional vessels that will be on long-term charter for other ferry operators.

Turkey’s Cemre Shipyard has contracted Dutch equipment supply company Pronomar to equip two service operation vessels (SOVs) ordered by Louis Dreyfus Armateurs for Ørsted with drying systems for the workwear of the technicians.The first of the two vessels, Wind of Change, has been using Pronomar’s equipment since June 2019 when it started servicing Ørsted’s offshore wind farms in the German North Sea.With accommodation for 90 people, this vessel is one of the biggest SOV’s in the offshore wind industry.After a successful delivery in April of this year, LDA commissioned Cemre Shipyard once again to build their sister vessel named “Wind…

Japanese shipping major Mitsui O.S.K. Lines (MOL) and three other compatriot firms have joined hands to establish a new company that will develop and promote zero-emission fully electric vessels.Asahi Tanker Co, a shipping company to transport petroleum, Japan's largest trading company  Mitsubishi Corp, and the shipping & marine supplier  Exeno Yamamizu Corp have joined MOL to set up e5 Lab Inc that will consolidate the technologies, know-how and network of the four major shareholders.e5 Lab will work to develop and promote the greater use of these relatively clean modes of marine transport, MOL said in a press release.There are a number of challenges facing Japan's shipping industry (see below)…

Heat transfer, separation and fluid handling technology specialist, Alfa Laval, has expanded its Test & Training Center in Aalborg, Denmark with a new gas testing facility. At the same time it continues developing new technologies in the areas of ballast water treatment, sulfur oxide emission control, touchscreen boiler control, fuel efficiency automation for inert-gas systems and methanol booster systems. Alfa Laval, a global provider of specialized products and engineering solutions based on the key technologies of heat transfer…

SKF and SKF Blohm + Voss Industries will showcase its combined range of solutions for the marine industry at the Nor-Shipping trade fair June 2-5, 2015 in Lillestrøm, near Oslo, Norway. At the show, SKF and SKF Blohm + Voss Industries will demonstrate a thruster exhibition model, which will enable visitors to see the full range of its associated products and services. Everything from the bearings, gear coupling and lubrication system, to the SIMPLEX-COMPACT seal and the propeller sleeve will be displayed. In addition, supplementary services, such as condition monitoring and alignment services, as well as SIMPLEX-COMPACT sterntube seals and an environmental monitoring system for measuring and recording emissions will be on show.

Danelec Marine, supplier of Voyage Data Recorders (VDRs), will showcase its DM100 VDR at SMM2014, located at Hall B6, Booth #623. It is the first VDR to be type approved and wheelmarked by BSH for compliance with the new IMO standard, which came into force July 1. The DM100 VDR features Danelec Marine’s SoftWare Advanced Protection (SWAP) technology, which stores all programming data and configuration files on a hot-swappable memory card. If the VDR unit fails, the service technicians remove the memory card from the malfunctioning unit and insert it into a replacement VDR.

Global marine supplier Alfa Laval now offers a set of sustainable solutions designed to help ship owners and operators comply with current and pending environmental regulations. Grouped under the conceptual name “Pure thinking”, the products will provide security as existing legislation is tightened, as well as compliance with new laws such as those that will regulate ballast water treatment. While most of the solutions can be retrofitted, incorporating them at the newbuilding stage will contribute to gaining DNV’s Clean Design class notation for the vessel under construction. “Long service at sea has given us a deep understanding of the marine environment and demands on the industry.

ZF Marine has been chosen as one of Mercury Marine’s suppliers of the year. Each year Mercury Marine evaluates over 1,500 suppliers, and selects only 12 to receive this award.  AJ Halavacs, Pleasure Craft Segment Manager, and John Shea, Account Manager, both from ZF Marine were on hand to receive the award from Mercury Marine.  It was presented last month at the Mercury Marine Supplier Conference in Sarasota. Fla.

electronic transactions with their customers. on the supplier side of the marine market. to marine e-business solutions. marine supply chain is what will provide value long term. is delivered by Shipcentric. process these directly. explains John Inge Røtting, Sales Director in MTS.

Unitor has developed an innovative new labeling system for its range of marine chemicals that aims to contribute significantly to upgraded shipboard safety. The new system, which is included on every pail or drum of product delivered, combines multi-lingual text and simple diagrams to improve communications and understanding. Each comprehensive label holds specific information on transport classification, emergency telephone numbers, product description and addresses of Unitor's major chemical offices as well as a complete Material Safety Data Sheet complying with the current international rules and regulations. Users are provided with information necessary for safe product handling and if an accident occurs, are given essential safety data to show to a doctor if treatment is needed.