Three Vericor Power Systems' TF50 marine aeroderivative gas turbines have
been selected to power the 118 Wallypower high-speed yacht being built by Intermarine Shipyard, Sarzana, Italy for Wally Yacht. This is Wally Yacht's first foray into high-speed power yachts, and the company's initial application of gas turbines. Wally Yacht, based in Monte Carlo, Monaco, is a world-renowned designer of high-speed sailing and power yachts.
The 118-ft. yacht will feature three TF50 gas turbines in a Combined Diesel Or Gas (CODOG) turbine configuration. Two TF50s will be used as side or "wing" engines, with one small auxiliary diesel engine connected to each wing engine. The diesels will provide for very slow maneuvering only. The wing engines will drive steerable waterjets while the center boost TF50 will drive a fixed waterjet. Total propulsion system output will be 16,800 hp/12,533 kW.
Cruising speed will be 60 knots, with a maximum speed of 70 knots. Following are the technical specifications for the 118 Wallypower yacht.
Detroit Diesel Corporation (DDC) packaged the CODOG system for the 118 Wallypower yacht. DDC, a Vericor Power Systems marine systems distributor, is part of MTU-Friedrichshafen, a division of DaimlerChrysler Powersystems.
The integrated system includes three TF50 gas turbines, controls, Maag gears, as well as fuel, lube, cooling and exhaust components. The following are the commercial marine specifications for the TF50 gas turbine.
Circle 4 on Reader Service Card
Wesmar Provides a Smooth Ride
"In Florida, you can live and operate vessels without stabilizers and bow thrusters, but once you've had them you can't live and work without them. It spoils you," said Clark Coit, speaking about the smooth ride and control the WESMAR stabilizers and bow thrusters have brought to Florida based Flight Systems' 72-foot Pacemaker fiberglass Motoryacht Flight.
Clark Coit captains
the Flight on its travels inside the intercoastal waterway between Miami and Philadelphia. They use the vessel primarily as a floating demonstrator to market the company's marine diesel engine monitor, a system that alerts boaters to engine problems before it is too late to avoid them. It's called the 'engine saver'." Coit is a licensed captain plus he works on product development for the company. His 15 years as a marine service manager and another 15 years running a boat yard have exposed him to most of the marine equipment out there. Four years ago he oversaw the installation of the WESMAR bow thruster and roll fin stabilizer.
Circle 3 on Reader Service Card
Crowley Makes Exec Changes
Tom Crowley Jr., Chairman, President and CEO of Crowley Maritime Corporation
and Richard du Moulin, president of Marine Transport Corporation (MTC), jointly announced that with the successful integration of MTC into Crowley, du Moulin will
be resigning from MTC to pursue other business interests. Crowley acquired Weehawken, N.J.-based MTC in February 2001. Mark Filanowski, senior vice president and CFO of MTC, will also be leaving the company. Both resignations will take effect April 1, 2002. du Moulin had been Chairman of MTC since 1989 when he and Filanowski, utilizing their company Intrepid Shipping, acquired what was then NASDAQ-listed Marine Transport Lines, Inc. (MTL). In 1998, working in conjunction with Craig Stevenson, Chairman of the Board of Directors of OMI Corp., du Moulin and Filanowski merged MTL into OMI, followed immediately by a separation of OMI into a U.S.-flag, NASDAQ-listed company called Marine Transport Corporation
and foreign-flagged, NYSE-listed company called new OMI. In the three years that followed MTC acquired the U.S.-flag tanker interests of Occidental Petroleum (OXY)
and Mormac Group, Inc., making MTC one of the largest U.S. ship operators. In February 2001, with the acquisition of MTC, Crowley became America's largest U.S.-flag shipping company. du Moulin has served in many industry leadership positions including Chairman of Intertanko, a tanker industry organization, and he serves on the boards of directors of the American Bureau of Shipping (ABS), the Seamen's Church Institute of New York/New Jersey, and the National Maritime Historical Society. Mark Filanowski is Chairman of the Board of Directors of the Shoreline Mutual (Bermuda) Ltd., and is a member of ABS.
Seabulk Selects ABS-NS SafeNet Management System
Seabulk Offshore Ltd., has selected ABS Nautical Systems SafeNet fleet management system for 14 supply, crew and utility boats operating in the U.S. Gulf of Mexico. "The strength of the SafeNet system is the complete integration that exists between the various management modules," said ABS Nautical Systems' senior business development manager Joe Woods. Seabulk Offshore has contracted for the Maintenance & Repair, Purchasing & Inventory and Financial Reporting modules. "Data need only be entered once to be available within each of these modules, vastly simplifying the control of the fleet and eliminating the possibility of incorrect duplicate entry," said Woods.
Circle 15 on Reader Service Card
Leica Unveils New Series of Laser Meters
Leica Geosystems has introduced a new series of handheld laser distance measurement tools for the marine industry. The new DISTO products are designed to provide point-and-click measurement of distance, area and volume, indoors or outdoors, at ranges up to 330 ft. According to Jack Wolf, vice president, DISTO is ideal for naval architects, marine engineers, marine surveyors, shipyards, boatbuilders, repair yards, marinas and other marine professionals who need fast, accurate measurements. The DISTO products are available in four basic models: DISTO lite4, DISTO classic4, DISTO pro4 and DISTO pro4a. Prices start at $445. The DISTO lite4 is small, handy and easy to use, making it simple to measure distances, areas and volumes comfortably and quickly, even in hard-to-access places. The DISTO lite4 includes a timer, stand, positioning bracket and alignment aid to mark off measured points as standard equipment. The DISTO classic4 is designed for more challenging applications. It offers Pythagoras calculations for remote measuring. With DISTO classic4, the user can measure minimum and maximum distance from any point, calculate indirect heights, and save and edit values. The unit's multifunctional end cover permits measuring from open areas, floors and edges, as well as hard-to-reach corners. The DISTO pro4 system has an alphanumeric keyboard, menu-driven multi-line LCD display, calculator functions, RS232 interface to a remote PC or laptop, memory for up to 800 values and multifunction end cover with adapter plate and alignment aid. The "smart" DISTO pro4 software automatically recognizes which end cover has been fitted and adjusts accordingly.
Circle 14 on Reader Service Card
Gulf Africa Announces New Appointments
Gulf Africa Line (GAL) has appointed Biehl & Company as general liner agents in the U.S. effective March 1, 2002. GAL's pricing and line management will be in Houston, while documentation and customer service will be handled at the Biehl regional offices. Biehl's contact information for rate inquiries and bookings will be as follows: Line Manager: Mrs. Charis Hargis; Toll Free : 1 877 GAL-SHIP (425-7447); Switchboard : 1 713 690-7200; E-mail : email@example.com; Website : www.galship.com
GAL's port agency agreement with Gulf Chartering in New Orleans and the Mississippi River will not be affected by this appointment.
Bumgarner Joins Matson as VP
Marc D. Bumgarner has joined Matson Intermodal System in Oakbrook Terrace as vice president, International. In this position, Bumgarner will be responsible for Matson Intermodals' entire international business sector, including current customers and strategic growth opportunities.
Bumgarner comes to Matson Intermodal with over a decade of intermodal marketing experience. He has held director posts at Atchison, Topeka and Santa Fe Railway and Burlington Northern Santa Fe Railway, with an emphasis on sales, marketing and pricing. Most recently, he was vice president, pricing and schedules, for Webmodal, a business-to-business web-based platform for the purchase of freight transportation.
WESMAR Produces New Stabilizer Video
Western Marine Electronics
(WESMAR) has released a new roll fin stabilizer video that goes into detail about stabilizer operation. Co-sponsored with one of WESMAR's local dealers (LaConner Maritime Service out of LaConner, Wash.) the eight-minute television segment was produced by Captain's Log: The Boating TV Show and was aired in late February on Western Washington stations.
The owners of the 56-ft. Selene, R-Turn, allowed the use of their boat to demonstrate the effect that the stabilizer has on vessels experiencing rough waters. With the stabilizers deactivated and then activated, viewers can see an obvious difference between the rolling vessel when chopping through rough water to the activated system offering a calm and comfortable ride.
Even more impressive, the R-Turn was hauled out so that viewers can see the fins and their location on the boat. While in the lift, she was rolled from port to starboard to demonstrate how the installed stabilizer works to counteract the rolling motion of the vessel.
Circle 16 on Reader Service Card
Christian Joins Mobex as HR Manager
Mobex Communications, Jeffersonville, Ind., has hired Kathy Christian as Human Resource Manager. Christian joined Mobex Communications from Precision Tool & Die where she was a Human Resource Generalist. Christian brings 15 years of experience in management with concentrations in human resources and accounting. Most recently Christian has worked in the manufacturing industry.
Globalstar To Conduct Business As Usual
Globalstar announced that the U.S. Bankruptcy Court in Delaware has approved all of the company's first day motions, allowing
Globalstar to continue normal course operations and, with the support of the Company's service providers, further assuring uninterrupted telecommunications service for its customers.
The Court approval, which was granted on February 21, follows Globalstar's filing on February 15 of a voluntary petition under Chapter 11 of the U.S. Bankruptcy Code with the same court.
Globalstar will conduct business as usual with respect to customers, employees and most suppliers. This includes payment of employee salaries and benefits and payment for goods and services provided after February 15, 2002.
As a result, Globalstar will continue its work on finalizing and implementing its new business plan as outlined in last week's announcement, and the company expects to file a complete plan of restructuring with the Court in the coming weeks.
Candela Joins Paragon
Nick Candela, a Project Management Professional (PMP), has joined Paragon Engineering Services, Inc., of Houston as manager of Project Controls, responsible for staffing project controls personnel on Paragon projects both in Houston and worldwide.
Candela's immediate role involves enhancing Paragon's project controls systems through the development of standards and procedures for planning, scheduling, cost control, progress measurement and change management. Candela also is developing corresponding training programs for project managers, lead engineers and project controls personnel in these essential functions. Candela brings more than 20 years' experience leading capital project teams in global environments. Prior to joining Paragon, Candela served as project manager for Technip USA and Dow Chemical Company, among others.
For Technip USA, Candela created and implemented project execution plans, subcontract schedules and procurement strategies. He led the detailed design, procurement and construction management effort for the major revamp of a fired heater to increase capacity and incorporate new technology. He also led the development of feasibility studies to evaluate cost effectiveness, installed cost, technological viability and other options.
Laborde Diesel Resists Corrosion
Laborde Products, Inc. of Covington, La., have reportedly produced a diesel engine used in dive packages that resists corrosion. The corrosion resistant engine was packaged into diving compressors and successfully tested in real life applications. The Hatz Diesel corrosion resistant engine is dismantled in the Laborde Products facility in Covington. Many parts and sheet metal components are sent though a coating process while others are cleaned and primed. Several modifications to the engine are done in order to increase its safety based on the rugged environment it will be exposed to. Such modifications include the corrosion treatment, hand-crank emergency starting, and air-cooling.
The treated Hatz Diesel engine offers a range from 16 to 76 hp. It is available in 2, 3, and 4-cylinder units. Laborde Products also maintains a large inventory of parts for the treated engines and has an extensive service program. John P. Laborde, Chairman of Laborde Products, was the former CEO & Chairman of Tidewater Marine Services while other Laborde family members are active in operating supply boats and lift boats in the Oil and Gas Industry. Tracy Laborde, President, acquired 20-year old Star Power in 1998 and renamed it Laborde Products, Inc. Since then Laborde has moved the company closer to the commercial marine markets. Besides distributing the Hatz Diesel brand, Laborde also distributes Yanmar Diesel Engines in the Gulf Coast and Mitsubishi (MBI.F)
Diesel Engines throughout the U.S.
Laborde offers a wide range of quality marine products to the workboat industry. Diesel pumps, generators, pressure washers and other diesel-powered equipment are available through Laborde's Diesel America Division. Laborde's Oarline Marine Division represents a number of quality marine equipment manufacturers including R.W. Fernstrum, Electronic Marine Systems, Aqua Air, and Mariteam Lighting.
Circle 12 on Reader Service Card
Schat-Harding Launches Miami Service Center
Schat-Harding has opened a new service and sales center in Miami. Focused initially on improving service to the cruise industry, it will also coordinate sales and service for all ships using Florida's ports. George Suarez, a cruise industry veteran, is leading the new team, which is co-located with Unitor Ships Services.
"We have sixty percent of the market share of lifeboats and davits for cruise ships," says Trygve Kjerpeseth, manager of the service department of Schat-Harding. "Miami and the Florida ports
are at the core of the global cruise industry, so we need a team there to support our clients."
The Miami facility will be developed to include a technical team to provide quick response to service needs, a spare parts depot and a sales coordination center. "We have a facility in the USA, in Louisiana," explains Kjerpeseth. "But our strategic focus now is to be a lifetime partner to our clients."
Circle 17 on Reader Service Card