Marine Link
Friday, September 30, 2016

Lubmarine Debuts New Cylinder Lubricant

February 17, 2005

TOTAL Lubmarine has developed a new lubricant specially designed for use with low-sulphur fuels. The lubricant, TALUSIA LS 40, has successfully completed in-service tests and is now approved by MAN B&W and WARTSILA Sulzer designs. TALUSIA LS 40 is now available in the major European ports and will be available in selected ports worldwide in 2005. Low-sulphur fuel will be compulsory in certain waters from May 2005 following the ratification of MARPOL Annex VI.

TALUSIA LS 40 is designed for engines operating continuously with low-sulphur fuel. Advantages include:

* Minimal piston ring and liner wear

* Maximum cleanliness

* Longer periods between overhauls

* Reduced engine maintenance costs

* High design safety margins, allowing for safe feed rate optimisation

Claude Ouvrier-Buffet, head of TOTAL Lubmarine's Technical Department, says, "TALUSIA LS 40 retains the same levels of detergency, anti-wear properties and thermal stability that operators have come to expect from our well-known TALUSIA HR 70, but has been designed especially for low-speed engines burning low-sulphur fuel. TALUSIA HR 70 has already proven in service that it is possible to reach low lube oil feed rates with perfect security, and the same possibility - and potential cost saving - is offered to our customers with the new TALUSIA LS 40."

When a low-sulphur fuel is burnt there is less acid production, so the lube oil should be switched to a lower base number to avoid excess alkalinity, which can lead to a build-up of deposits, especially on the piston crown.

However, formulating a lubricant to cope with low-sulphur fuel oil is not just a question of diluting existing products. Dilution would reduce alkalinity, but would not leave enough detergency to protect the engine from a build-up of deposit precursors. TALUSIA LS 40 also has increased detergent properties to ensure that the engine is kept clean and protected from wear and corrosion.



Maritime Reporter Magazine Cover Sep 2016 - Maritime & Ship Security

Maritime Reporter and Engineering News’ first edition was published in New York City in 1883 and became our flagship publication in 1939. It is the world’s largest audited circulation magazine serving the global maritime industry, delivering more insightful editorial and news to more industry decision makers than any other source.

Subscribe
Maritime Reporter E-News subscription

Maritime Reporter E-News is the subsea industry's largest circulation and most authoritative ENews Service, delivered to your Email three times per week

Subscribe for Maritime Reporter E-News