Moose Boats Launches New Design

Friday, April 05, 2002
Moose Boats announced its latest boat design, the S3000, an outboard catamaran, during the Fred Hall Fishing Tackle and Boat Show, March 6 - 10, at the Long Beach Convention Center. With twin Yamaha 225 HP, four-stroke, fuel injected outboards and the catamaran design; the S3000 has a top end speed of 40 knots and a cruise speed of 32 knots. The overall length is 32.5 ft. and weighs approximately 8,800 lbs. dry and holds 300 gallons of fuel, which provides a comfortable 450 mile range. Moose Boats only builds aluminum catamarans. The S3000 is the first outboard fishing boat that takes full advantage of this stable cat design. The all welded aluminum hull makes the S3000 a rugged, all weather boat that can handle the most demanding sea conditions. Getting you out to the fishing grounds and back faster and safer than a conventional mono hull. Moose Boats Introduces its Aluminum Catamaran Multi-Purpose Boats Moose Boats launched the first of its line of new generation welded aluminum power catamarans, the J3200. The company has spent over a year in the design of the J3200. Conception began with a two-ft. scale model of the vessel to study the hull design and a full-size plywood mock-up of the vessel, enabling the design team to visualize and refine cabin and topside details before going into production. The J3200 is a symmetrical catamaran hull incorporating revolutionary design concepts. The center wave breaker cushions the hull, reducing jarring and pounding. The lifting strakes and reverse chines throw the spray keeping the vessel dry, and enabling the hull to stay on a plane at as low as 12-14 knots. The J3200 is smooth riding, stable, competent and fast. One of the most prominent features of the Moose J3200is its generous walk around deck plan. As a working platform for sport or commercial fishing, the side decks offer a protected pathway to the fore deck. Inside the fully welded aluminum cabin, the main helm station offers 360-degree visibility through large forward leaning windows, and a thoughtful ergonomic layout. Helm and companion seats feature a rubber cushion suspension system and are covered with stylish durable ballistic nylon. The interior has a simple modern feel to it, with basic colors and lightwoods. The layout is straightforward and functional, with a well-equipped galley, standup head and shower, and a fold down dinette with a solid maple table and smartly upholstered cushions. Circle 11 on Reader Service Card www.marinenewsinfo.com J3200 Specifics Length, o.a. 34.5 ft. Length, waterline 34.5 ft. Beam 11.2 ft. Draft Hull/Max 23 in. Deadrise 15 degrees Displacement 13,800 lbs dry (6,210 kg) Top Speed 35 knots Cruise 29 knots Range 350 nautical miles Fuel Capacity 290 gallons Power Twin Cummins 6BTA5.9-M3 330 hp diesels Jets Twin Hamilton 274 Water jets Seahorse Marine Expands to Lift Boats Seahorse Marine, well known for innovation in its utility boat fleet, is diversifying with the building of a lift-boat at Bollinger Shipyards. Scheduled to launch in March this year, the completed boat will be delivered in June and will fit into the "larger" category for this type of vessel. Overall length of the boat, to be named Alec Scott, is 131 ft. with a 77-fts beam and a ten-ft. molded depth. Each of the three legs will be 175 ft., giving it the ability to work in water to depths of 130 ft. Main propulsion engines will be a pair of Cummins KTA38 M0 each producing 850 hp at 1,800 rpm. The boat will be equipped with two cranes - a 100 ton powered by a 530-hp Cummins KTA 19 and a 25-ton powered by a 250-hp Cummins 6CTA. Designed to operate with a crew of six, the vessel will include additional accommodation and mess facilities for up to 30 off-shore workers. Electrical service will be provided by two Cummins 6CTA powered 160 Kw generator sets with a third Cummins 6BTA powered 75 kW emergency generator. Design work on the new lift-boat has been done by Bollinger's staff. It will be fully SOLAS certified, "We wanted this boat built to the highest standards and we felt that this was an important part of that goal," said Seahorse president Phillip Plaisance. Circle 5 on Reader Service Card www.marinenewsinfo.com USCG Issues NPRM The U.S. Coast Guard has issued a Notice of Proposed Rulemaking (NPRM) relating to servicing intervals for inflatable liferafts and inflatable buoyant apparatus (IBA) on domestic commercial vessels not certificated under SOLAS. Under the proposal, the first servicing of such new devices on these vessels would be deferred to two years after initial packing. Comments on the proposal should be submitted by May 6, 2002. Source: HK Law
Maritime Reporter May 2015 Digital Edition
FREE Maritime Reporter Subscription
Latest Maritime News    rss feeds

Bulk Carrier Trends

Bahri Inks Contracts with Hyundai to Build 5 VLCCs

The National Shipping Co. of Saudi Arabia (Bahri) signed contracts on Thursday with Hyundai Samho Heavy Industries (HSHI) to build five very large crude carriers (VLCCs),

Asia Dry Bulk-Capesize Rates Mixed on Uncertainty

Capesize rates slide after hitting 5-month high. Rates for capesize bulk carriers eased this week after hitting their highest since December, and could come

HSH Bank to Split Off Bad Shipping Loans

German lender HSH Nordbank could split off a "bad bank" for non-performing shipping loans as part of a plan to create a sustainable business model, according to a person familiar with the matter.

Workboats

MPC Honors Crowley for Tank Vessel Safety

Crowley Maritime Corporation’s petroleum services division has once again been honored by Marathon Petroleum Company (MPC) with its annual Elite Vessel Award, which

Indonesia Sinks Boats from China

According to The China People's Daily, Indonesia has just sank a large Chinese vessel and 40 other foreign ships caught fishing in The South China Sea.    The

Laborde Repowers Much of Stone Oil Fleet

In January 2014, Laborde Products sold its first Mitsubishi engine to John W. Stone Oil for the vessel John W. Stone. Since then, Laborde has supplied the Gretna,

 
 
Maritime Careers / Shipboard Positions Maritime Security Maritime Standards Offshore Oil Pod Propulsion Port Authority Salvage Ship Simulators Shipbuilding / Vessel Construction Sonar
rss | archive | history | articles | privacy | contributors | top maritime news | about us | copyright | maritime magazines
maritime security news | shipbuilding news | maritime industry | shipping news | maritime reporting | workboats news | ship design | maritime business

Time taken: 0.1035 sec (10 req/sec)