Swansea Dry Docks Open for Business

Tuesday, May 18, 2010

Following the successful use of Swansea Dry Docks for the refit and refurbishment of Saga Pearl II, now successfully cruising; work on MV Julia, now plying the Fastnet Ferry Cork-Swansea overnight route; and emergency repair work on the 213.2 ft hopper dredger Heron, Harris Pye Group (HPG) has signed a longer lease on Swansea’s Duke of Edinburgh and Prince of Wales dry docks – a move that is attracting interest from a number of shipping lines.
“We are very much ‘open for business’, indeed we dealt with the requirements of UKD Dredging’s Dolphin at the start of May” said the Group’s Managing Director, Mark Prendergast. “We invested heavily to revitalize the dry docks and are firmly committed to ongoing investment in them to enhance the existing facility and continually improve the service to clients.  Their proximity to our UK headquarters and workshops at Barry ensures access to resources and infrastructure for fully supported operations and the ability for fast reaction to changing circumstances – just what is needed for an efficient and effective dry dock service.”
“Our first three docked vessels – a cruise liner, a ferry and a dredger - gave us good early experience of use of the docks,” said Chris David, HPG’s Technical Director.
“The Saga Pearl II project was a huge one, she was in the dry dock from mid-September 2009 until the first week in March 2010, and clearly showed what we are able to accomplish. In all we had had as many as 280 people working day and night shifts on the vessel, and were able to recruit some really good welders, platers and fitters locally, thus bringing employment to the area and boosting the economy in many ways. Working on MV Julia and doing emergency work on the Heron showed different ‘quick turn round’ aspects of our capability.
“Working on UKD Dolphin was our first project under the new agreement,” explained David. “We received a call from UKD on 29 April asking if the dock was available as they were looking for somewhere to carry out an emergency docking of the Dolphin. They had a problem with severe vibration around the aft end of the vessel, and there were concerns that her propeller blades were damaged. The dock was indeed available and prepared over the Early May Bank Holiday weekend. The vessel arrived and was brought into the dock on Sunday 2 May and on the blocks and dry by the Bank Holiday Monday (3 May) ready for work to start the next day.
“It was found that the four propeller blades on the starboard side were severely bent; the owners supplied new blades and these were changed out. With the vessel in the dry dock the opportunity was taken to carry out some other work between the Tuesday and Friday. The crosshead linkages for opening/closing six of the hopper doors were repaired; the dredge pipe flexible gamble was replaced; the dredge pump was opened up by members of the ship’s staff and internal welding repairs were carried out by our team; the leaking dredge valves were opened up and debris removed from the sealing area; and the entire hull was scraped of barnacles and high pressure washed.
“Everything was completed by the early evening of Friday 7 May, the dock was flooded up and the vessel left Swansea on the midnight tide, as requested by the owners, to go straight back into service.”
Two dry docks
The two dry docks can cater for vessels of a variety of sizes and duration of stay. At 669.3 ft overall length, the Duke of Edinburgh Dock is the larger of the two with clear width at the entrance of 91.9 ft, clear width between dock walls of 99.7 ft, and draught over blocks of 21.3 ft. The Prince of Wales Dock is 564.3 ft in overall dock length with clear width at the entrance of 73 ft and draught over blocks of 23 ft, so marginally deeper than the Duke of Edinburgh Dock.
HPG is a rapidly expanding global player with main stations in the UK (in Barry), Dubai and Singapore; and offices and repair facilities in Scandinavia, Portugal, Brazil, Bahrain, Indonesia, Malaysia, Japan and Australia, and has active involvement in many key marine and industrial sectors. The Group brings a wide range of skills and strengths to the Dry Docks including:
•    Fully accredited in-house QA department
•    Large flexible permanent workforce (the Group employs 750+)
•    Proven ability to maximise local supply chain
•    Project management skills
•    A 24/7 global player, the Group typically offers 12/7 shifts
•    Extensive steel work experience + fabrication shops and heat treating facilities
•    Pipe fitting shops
•    High pressure water blasting for hull and tanks
•    Hull painting
•    Boiler and pressure vessel design, manufacture and installation
•    Electrical and control systems
•    Refrigeration and HVAC departments
•    Outfitting of passenger and crew accommodation
•    In-house stainless steel fabrication - specialists in catering and galley installations
“It is important to point out that the dock complex has an accommodation and messing compound for use by ships’ crews when ships’ services are shut down,” said Chris David. “This results in substantial savings on hotel and travelling costs as well as allowing uninterrupted work on board the vessel.”

Maritime Today

The Maritime Industry's original and most viewed E-News Service

Maritime Reporter May 2016 Digital Edition
FREE Maritime Reporter Subscription
Latest Maritime News    rss feeds


Bay Shipbuilding Delivers ATB to Moran

Fincantieri Marine Group’s Fincantieri Bay Shipbuilding (FBS) has delivered the Articulated Tug Barge unit (ATB) Barbara Carol Ann Moran and the 110,000-barrel

Conrad Shipyard Christens Woods Hole Ferry

M/V Woods Hole, a 235-foot long passenger ferry built for the Steamship Authority of Woods Hole, Mass., was christened on May 20 at Conrad Aluminum in Amelia, La.

Tech & Design Solutions for Modern Workboats

EPA Tier 4 regulations (for engines of 804 hp and higher) and propulsion advancements have many manufacturers and vessel designers changing course to adapt to new requirements and customer demands.

Maritime Contracts Maritime Security Navigation Offshore Oil Pod Propulsion Port Authority Ship Electronics Ship Repair Shipbuilding / Vessel Construction Sonar
rss | archive | history | articles | privacy | contributors | top maritime news | about us | copyright | maritime magazines
maritime security news | shipbuilding news | maritime industry | shipping news | maritime reporting | workboats news | ship design | maritime business

Time taken: 0.1012 sec (10 req/sec)